Makita HP001GD202 Manual

Makita bore HP001GD202

Læs gratis den danske manual til Makita HP001GD202 (16 sider) i kategorien bore. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Makita HP001GD202, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

INSTRUCTION MANUAL

Cordless Hammer Driver Drill

HP001G

ENGLISH: Original instructions

IMPORTANT: Read Before Using.

2 ENGLISH

SPECIFICATIONS

Model: HP001G

Drilling capacities 20 mmMasonry

Steel 20 mm

Wood Auger bit: 50 mm

Self-feed bit: 76 mm

Hole saw: 152 mm

Fastening capacities Wood screw 10 mm x 90 mm

Machine screw M6

No load speed (RPM) High (2) 0 - 2,600 min-1

Low (1) 0 - 650 min-1

Blows per minute High (2) 0 - 39,000 min-1

Low (1) 0 - 9,750 min-1

Overall length 182 mm

Rated voltage D.C. 36 V - 40 V max

Net weight 2.7 - 3.0 kg

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications may differ from country to country.

• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL4025 / BL4040

Charger DC40RA

•

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Symbols

The followings show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for impact drilling in brick, brickwork

and masonry. It is also suitable for screw driving and

drilling without impact in wood, metal, ceramic and

plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-1:

Sound pressure level (L

pA) : 85 dB(A)

Sound power level (L

WA) : 96 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE:

The declared noise emission value(s) may

also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can differ from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	bore
Model:	HP001GD202

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita HP001GD202 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

bore Makita Manualer

Makita DHR263ZJ Manual

12 Oktober 2024

Makita HP2070 Manual

12 Oktober 2024

Makita DDA350RFJ Manual

7 Oktober 2024

Makita HP332D Manual

7 Oktober 2024

Makita M6501 Manual

6 Oktober 2024

Makita DDF453SFE Manual

2 Oktober 2024

Makita 8434DWFE Manual

1 Oktober 2024

Makita DF030DWJ Manual

28 September 2024

Makita HR2610 Manual

23 September 2024

Makita DHP453Z Manual

15 September 2024

bore Manualer

Nyeste bore Manualer

Einhell BM-G1100 E Manual

14 Oktober 2024

Sun Joe 24V-DDK-LTX-PNK Manual

14 Oktober 2024

DeWalt DWD450 Manual

14 Oktober 2024

Rupes BH 252R Manual

13 Oktober 2024

Einhell TE-ID 750/1 E Manual

7 Oktober 2024

Metabo BH 18 LTX BL 16 Manual

6 Oktober 2024

Metabo BE 75-X3 Quick Manual

5 Oktober 2024

Metabo BE 75-16 Manual

5 Oktober 2024

Hitachi DH 45SA Manual

4 Oktober 2024

Black And Decker XD1200 Manual

4 Oktober 2024