Makita HP1631K Manual

Makita Boremaskine HP1631K

Læs gratis den danske manual til Makita HP1631K (8 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Makita HP1631K, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Hammer Drill

HP1630

HP1631

008892

ENGLISH (Original instructions)

SPECIFICATIONS

Model HP1630 HP1631

Concrete 16 mm 16 mm

Steel 13 mm 13 mm Capacities

Wood 30 mm 30 mm

No load speed (min

-1 ) 0 - 3,200 0 - 3,200

Blows per minute 0 - 48,000 0 - 48,000

Overall length 296 mm 295 mm

Net weight 2.1 kg 2.0 kg

Safety class /II /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE039-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone as well as for drilling without impact in wood,

metal, ceramic and plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 97 dB (A)

Sound power level (L

WA) : 108 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 17.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	HP1631K
Type:	Boremaskine
Vekselstrømsindgangsspænding:	110 - 240 V
Bredde:	296 mm
Dybde:	204 mm
Højde:	296 mm
Vægt:	1900 g
Borepatron type:	Nøglefri
Indgangseffekt:	710 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	3200 rpm
Kabellængde:	2 m
Justerbar hastighed:	Ja
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	30 mm
Bore-diameter, sten (maks.):	16 mm
Slagboring:	Ja