Makita HR1830 Manual

Makita Boremaskine HR1830

Læs gratis den danske manual til Makita HR1830 (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Makita HR1830, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Rotary Hammer

HR1830

HR1830F

007227

ENGLISH (Original instructions)

SPECIFICATIONS

Model HR1830/F

Concrete 18 mm

Core bit 35 mm

Diamond core bit (dry type) 65 mm

Steel 13 mm

Capacities

Wood 24 mm

No load speed (min

-1) 0 - 1,500

Blows per minute 0 - 5,000

Overall length 279 mm

Net weight 1.9 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE042-1

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone.

It is also suitable for drilling without impact in wood, metal,

ceramic and plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 86 dB(A)

Sound power level (L

WA) : 97 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG217-2

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 14.0 m/s2

Uncertainty (K) : 1.5 m/s2

ENG302-2

Work mode : drilling into metal

Vibration emission (ah,D) : 2.5 m/s

2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	HR1830
Bredde:	279 mm
Dybde:	66 mm
Højde:	208 mm
Vægt:	1900 g
Ledningslængde:	4 m
Borepatron type:	SDS-plus
Indgangseffekt:	440 W
Strømkilde:	Vekselstrøm
Lydeffektniveau:	97 dB
Lydtryksniveau:	86 dB
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	24 mm
Bore diameter, beton (maks.):	18 mm
Energi ved slagkraft:	1.2 J
Vurderet hastighed:	1500 rpm
Slagkraft:	5000 bpm or slag i minuttet