Makita HR1840 Manual

Makita bore HR1840

Læs gratis den danske manual til Makita HR1840 (12 sider) i kategorien bore. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Makita HR1840, eller vil du spørge andre brugere om produktet?

Side 1/12
INSTRUCTION MANUAL
Rotary Hammer
HR1840
HR1841F
ENGLISH: Original instructions
DOUBLE INSULATION
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: HR1840 HR1841F
Capacities Concrete 18 mm
Core bit 35 mm
Diamond core bit (dry type) 65 mm
Steel 13 mm
Wood 24 mm
No load speed 0 - 2,100 min-1
Blows per minute 0 - 4,800 min-1
Overall length 285 mm
Net weight 2.0 - 2.4 kg 2.0 - 2.5 kg
Safety class /II
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s).Thelightestandheaviestcombination,accordingto
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model HR1840
Sound pressure level (L
pA) : 87 dB(A)
Sound power level (L
WA) : 98 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR1841F
Sound pressure level (L
pA) : 87 dB(A)
Sound power level (L
WA) : 98 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model HR1840
Work mode: hammer drilling into concrete
Vibration emission (a
h, HD): 10.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (a
h,D) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
Model HR1841F
Work mode: hammer drilling into concrete
Vibration emission (a
h, HD): 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (a
h,D) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.


Produkt Specifikationer

Mærke: Makita
Kategori: bore
Model: HR1840

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita HR1840 stil et spørgsmål nedenfor, og andre brugere vil svare dig




bore Makita Manualer

Makita

Makita DHR263ZJ Manual

12 Oktober 2024
Makita

Makita HP2070 Manual

12 Oktober 2024
Makita

Makita DDA350RFJ Manual

7 Oktober 2024
Makita

Makita HP332D Manual

7 Oktober 2024
Makita

Makita M6501 Manual

6 Oktober 2024
Makita

Makita DDF453SFE Manual

2 Oktober 2024
Makita

Makita 8434DWFE Manual

1 Oktober 2024
Makita

Makita DF030DWJ Manual

28 September 2024
Makita

Makita HR2610 Manual

23 September 2024
Makita

Makita DHP453Z Manual

15 September 2024

bore Manualer

Nyeste bore Manualer