Makita HS011GZ Manual

Makita Sav HS011GZ

Læs gratis den danske manual til Makita HS011GZ (24 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 85 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 43 anmeldelser. Har du et spørgsmål om Makita HS011GZ, eller vil du spørge andre brugere om produktet?

Side 1/24
INSTRUCTION MANUAL
Cordless Circular Saw
HS011G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: HS011G
Blade diameter 255 mm 260 mm 270 mm
Max. Cutting depth at 0° 94 mm 97 mm 101 mm
at 45° bevel 65 mm 68 mm 71 mm
at 60° bevel 45 mm 48 mm 51 mm
No load speed 3,500 min-1
Overall length 453 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 5.5 - 6.7 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydi󰀨erfromcountrytocountry.
• Theweightmaydi󰀨erdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL4020 / BL4025 / BL4040 / BL4050F* / BL4080F*
*:Recommendedbattery
Charger DC40RA / DC40RB / DC40RC
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Symbols
Thefollowingsshowthesymbolswhichmaybeused
fortheequipment.Besurethatyouunderstandtheir
meaning before use.
Read instruction manual.
Wearsafetyglasses.
Ni-MH
Li-ion
OnlyforEUcountries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
andbatteriesmayhaveanegativeimpact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulatorsshouldbestoredseparately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
Thisisindicatedbythesymbolofthe
crossed-out wheeled bin placed on the
equipment.
Intended use
Thetoolisintendedforperforminglengthwaysand
crosswaysstraightcutsandmitrecutswithanglesin
woodwhileinrmcontactwiththeworkpiece.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841-2-5:
Soundpressurelevel(L
pA):93dB(A)
Soundpowerlevel(L
WA):104dB(A)
Uncertainty(K):3dB(A)
NOTE:
Thedeclarednoiseemissionvalue(s)hasbeen
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:
Thedeclarednoiseemissionvalue(s)may
alsobeusedinapreliminaryassessmentofexposure.
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can di󰀨er from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o󰀨 and when it is running idle in addition to the
trigger time).


Produkt Specifikationer

Mærke: Makita
Kategori: Sav
Model: HS011GZ
Vægt: 6700 g
Produktfarve: Black, Green, Metallic
Batterispænding: 40 V
Indbygget lys: Ja
Batteriteknologi: Lithium-Ion (Li-Ion)
Strømkilde: Batteri
Tomgang (maks.): 3500 rpm
Lydeffektniveau: 104 dB
Lydtryksniveau: 93 dB
Facetkapacitet (maks.): 60 °
Støvudledningsport: Ja
Blad, diameter: 270 mm
Skæredybde (45º): 71 mm
Skæredybe (90º): - mm
Velegnet til materialer: Træ
Vibrationsniveau (træskæring): 2.5 m/s²

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita HS011GZ stil et spørgsmål nedenfor, og andre brugere vil svare dig




Sav Makita Manualer

Makita

Makita UC022G Manual

2 September 2025
Makita

Makita UC025G Manual

1 September 2025
Makita

Makita UC026G Manual

1 September 2025
Makita

Makita CE004G Manual

29 August 2025
Makita

Makita DUC150 Manual

17 August 2025
Makita

Makita DUC355 Manual

14 August 2025
Makita

Makita JV001G Manual

11 August 2025
Makita

Makita DUA300 Manual

11 August 2025
Makita

Makita DUA200 Manual

19 Juli 2025
Makita

Makita DHS782 Manual

15 Juli 2025

Sav Manualer

Nyeste Sav Manualer

Tanaka

Tanaka ECV-5601 Manual

13 September 2025
Tanaka

Tanaka TCS 33EB Manual

13 September 2025
Tanaka

Tanaka TCS 2800S Manual

13 September 2025
Tanaka

Tanaka TCS 33EDP Manual

13 September 2025
Tanaka

Tanaka TCS 51EA Manual

13 September 2025
Hitachi

Hitachi C 10FSHPS Manual

13 September 2025
Metabo

Metabo C7BUR Manual

12 September 2025
Hitachi

Hitachi C 7BUR Manual

12 September 2025
Metabo

Metabo C3607DWAQ4 Manual

12 September 2025
Metabo

Metabo C7SB3 Manual

12 September 2025