Makita LS002GD203 Manual

Makita Sav LS002GD203

Læs gratis den danske manual til Makita LS002GD203 (40 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 77 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 39 anmeldelser. Har du et spørgsmål om Makita LS002GD203, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/40
INSTRUCTION MANUAL
Cordless Slide Compound Miter Saw
LS002G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: LS002G
Blade diameter 216 mm
Hole (arbor) diameter (country specic) 15.88 mm / 25.4 mm / 30 mm
Max. kerf thickness of the saw blade 2.4 mm
Max. miter angle Left 60°, Right 60°
Max. bevel angle Left 48°, Right 48°
No load speed 4,800 min-1
Dimensions (L x W x H) 702 mm x 551 mm x 557 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 16.4 - 17.0 kg
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4025 / BL4040
Charger DC40RA
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Cutting capacities (H x W) with blade 216 mm in diameter
Miter angle Bevel angle
45° (left) 45° (right)0°
0° 50 mm x 312 mm 70 mm x 312 mm 30 mm x 312 mm
45° (left and right) 50 mm x 220 mm 70 mm x 220 mm 30 mm x 220 mm
60° (left and right) 70 mm x 155 mm– –
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
To avoid injury from ying debris, keep
holding the saw head down, after making
cuts, until the blade has come to a com-
plete stop.
When performing slide cut, rst pull car-
riage fully and press down handle, then
push carriage toward the guide fence.
When performing bevel cut, rst loosen the
grip dial and tilt the carriage to the desired
angle, then tighten the grip dial.
When tilting the blade beyond the range 0°
- 45°, turn the releasing lever for 48° bevel
angle in clockwise direction.
Do not place hand or ngers close to the
blade.
Wear safety glasses.
Do not stare at operating lamp.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for accurate straight and miter cutting in wood.
With appropriate saw blades, aluminum can also be sawed.
Do not use the saw to cut other than wood, aluminum or
similar materials.

Produkt Specifikationer

Mærke: Makita
Kategori: Sav
Model: LS002GD203

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita LS002GD203 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Makita Manualer

Makita

Makita 4333 dwde Manual

14 Oktober 2024
Makita

Makita 5621 rdwbe Zaag Manual

12 September 2024
Makita

Makita 5704rk Zaag Manual

4 August 2024
Makita

Makita 5903rk Zaag Manual

4 August 2024
Makita

Makita MLT 100 Zaag Manual

4 August 2024
Makita

Makita bjr 240 Zaag Manual

4 August 2024
Makita

Makita 5903r Zaag Manual

4 August 2024
Makita

Makita 5704r Zaag Manual

4 August 2024
Makita

Makita bsr 730 Zaag Manual

4 August 2024
Makita

Makita 5705r Zaag Manual

4 August 2024

Sav Manualer

Nyeste Sav Manualer

Smart365

Smart365 SM-04-02060 Manual

17 Juni 2025
Dremel

Dremel CS12V Manual

13 Juni 2025
Metabo

Metabo BAS 505 Precision WNB Manual

9 Juni 2025
Mega

Mega 64000 Manual

9 Juni 2025
Metabo

Metabo ST 18 LT 130 Manual

8 Juni 2025
Metabo

Metabo STB 18 LT 130 Manual

8 Juni 2025
Metabo

Metabo BAS 505 Precision DNB Manual

7 Juni 2025
Draper

Draper 70833 Manual

7 Juni 2025
Draper

Draper 83677 Manual

6 Juni 2025
Draper

Draper Storm Force 98445 Manual

6 Juni 2025