
Press machine down rmly on a stable, at surface to
Check the shavings drawer is correctly tted.
Connect the electricity plug to a standard power
Gently insert pencil horizontally into pencil opening
Sharpening will start automatically
Keep pencil straight to avoid uneven sharpening
Once the pencil has its desired point, the machine
will automatically stop sharpening
Remove the pencil from the pencil opening to
Please read the following instructions
before operating your sharpener.
l To be used under adult supervision only.
Regular cleaning will ensure that your sharpener operates eciently.
l Use a small brush (e.g. paintbrush or toothbrush) to clean the
cutting blade. Never use metal objects as this may damage the
l The shavings tray can be removed and cleaned with water only.
Never clean the main sharpener unit with water or use solvents such
l Sharpening coloured pencils causes wax to build up on the
l We recommend alternating between coloured and graphite pencils
as graphite will help to clean the blade.
l If excessive build up occurs then clean the blade as per the
l This sharpener is tted with a safety switch ensuring that it cannot
be operated unless the shavings tray is fully in place.
l This sharpener is suitable for intermittent use and should not be
used continuously for more than 12 minutes.
Continual use will cause the thermal cut-out system to activate.
This is a safety feature and the sharpener will require a cool down
period of approx. 20-30 minutes before it is ready for use.
l As with all sharpeners, frequent use will eventually blunt the
sharpener blade. For replacement blades, please contact your
supplier quoting product code .40023
For troubleshooting and product support, please visit www.swordshsupport.com