Makita M4301 Manual

Makita Sav M4301

Læs gratis den danske manual til Makita M4301 (12 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Makita M4301, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Jig Saw

M4301

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: M4301

Length of stroke 18 mm

Blade type B type

Max. cutting capacities 65 mmWood

Mild steel 6 mm

Strokes per minute (min-1

) 0 - 3,100

Overall length 214 mm

Net weight 1.9 kg

Safety class /II

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Weight according to EPTA-Procedure 01/2003

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for the sawing of wood, plastic and

metal materials. As a result of the extensive accessory

and saw blade program, the tool can be used for many

purposes and is very well suited for curved or circular

cuts.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (LpA) : 82 dB(A)

Sound power level (LWA) : 93 dB (A)

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Work mode: cutting boards

Vibration emission (a

h,B) : 8.0 m/s2

Uncertainty (K) : 1.5 m/s

Work mode: cutting sheet metal

Vibration emission (a

h,M) : 5.0 m/s2

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

Makita declares that the following Machine(s):

Designation of Machine: Jig Saw

Model No./ Type: M4301

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents: EN60745

Thetechnicalleinaccordancewith2006/42/ECis

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

17.8.2015

Produkt Specifikationer

Mærke:	Makita
Kategori:	Sav
Model:	M4301
Vekselstrømsindgangsspænding:	- V
Bredde:	75 mm
Dybde:	214 mm
Højde:	202 mm
Vægt:	1900 g
Produktfarve:	Black, Orange
Strøm:	450 W
Ledningslængde:	2 m
Indgangseffekt:	450 W
Strømkilde:	Vekselstrøm
Soft greb:	Ja
Kabellængde:	2 m
Lydeffektniveau:	3 dB
Lydtryksniveau:	82 dB
Justering af facet:	Ja
Facetkapacitet (maks.):	45 °
Tomgangshastighed (maks.):	3100 spm
Slaglængde:	18 mm
Skæredybde i træ:	65 mm
Usikkerhed i lydniveauet:	3, 93 dB
Skæredybde i ikke-legeret stål:	6 mm
Vibrationsniveau (stål):	5 m/s²
Vibrationsniveau (træ):	8 m/s²
Usikkerhed om vibrationsniveau (træ):	1.5 m/s²
Usikkerhed om vibrationsniveau (stål):	1.5 m/s²