Makita PV301DZ Manual

Makita Rysteplaster PV301DZ

Læs gratis den danske manual til Makita PV301DZ (12 sider) i kategorien Rysteplaster. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Makita PV301DZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Cordless Sander Polisher

PV301D

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: PV301D

Maximum capacities Wool pad 80 mm

Sponge pad 80 mm

Sanding disc 50 mm

Backing pad diameter For sanding 46 mm

For polishing 75 mm

Rated speed (n) /

No load speed (n0)High (2 ):

sanding mode

0 - 9,500 min-1

Low (1 ):

polishing mode

0 - 2,800 min-1

Overall length 139 mm *1

Rated voltage D.C. 10.8 V - 12 V max

Net weight 1.1 - 1.2 kg

*1. With battery cartridge (BL1041B).

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications and battery cartridge may dier from country to country.

• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combinations, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL1016 / BL1021B / BL1041B

Charger DC10SA / DC10SB / DC10WC / DC10WD / DC18RE

•

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Wear safety glasses.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or battery

pack together with household waste material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for polishing, smoothing before paint-

ing, nishing surfaces, and removing rust and paint.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745-2-3:

Sound pressure level (L

pA) : 73 dB(A)

Uncertainty (K) : 3 dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can dier from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Rysteplaster
Model:	PV301DZ
Vægt:	1500 g
Produktfarve:	Black,Green
Batterispænding:	18 V
Produkttype:	Gulvpoleringsmiddel
Strømkilde:	Batteri
Tomgang (min.):	2800 rpm
Tomgang (maks.):	9500 rpm
Lydtryksniveau:	73 dB
Vibrationsudledning:	2.5 m/s²
Justerbar hastighed:	Ja
Længde (maks):	160 mm
Motor hastighed:	2800 rpm