Makita SP001GZ03 Manual

Makita Sav SP001GZ03

Læs gratis den danske manual til Makita SP001GZ03 (24 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 58 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 29.5 anmeldelser. Har du et spørgsmål om Makita SP001GZ03, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

INSTRUCTION MANUAL

Cordless Plunge Cut Saw

SP001G

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: SP001G

Blade diameter 165 mm

Max. Cutting depth at 0° 56 mm

at 45° bevel 40 mm

at 48° bevel 38 mm

No load speed 2,500 - 4,900 min

-1

Overall length (with BL4040) 375 mm

Rated voltage D.C. 36 V - 40 V max

Net weight 4.4 - 5.0 kg

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications and battery cartridge may di󰀨er from country to country.

• The weight may di󰀨er depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combinations, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL4020/BL4025*/BL4040*/BL4050F*

* : Recommended battery

Charger DC40RA / DC40RB / DC40RC

•

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Wear safety glasses.

Ni-MH

Li-ion

Only for EU countries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

and batteries may have a negative impact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household

waste!

In accordance with the European Directive

on waste electrical and electronic equip-

ment and on accumulators and batteries

and waste accumulators and batteries,

as well as their adaptation to national law,

waste electrical equipment, batteries and

accumulators should be stored separately

and delivered to a separate collection point

for municipal waste, operating in accor-

dance with the regulations on environmen-

tal protection.

This is indicated by the symbol of the

crossed-out wheeled bin placed on the

equipment.

Intended use

The tool is specially intended for performing plunge

cuts. The tool is also intended for rip and cross cuts in

wood. If the tool is equipped with proper circular saw

blade, the tool can be used for sawing aluminum, plas-

tic, mineral contained plastic, and similar materials.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-5:

Sound pressure level (L

pA) : 89 dB(A)

Sound power level (L

WA) : 100 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE:

The declared noise emission value(s) may also

be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can di󰀨er from the declared val-

ue(s) depending on the ways in which the tool is used

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched o󰀨 and when

it is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Sav
Model:	SP001GZ03

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita SP001GZ03 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Makita Manualer

2 September 2025

1 September 2025

1 September 2025

29 August 2025

17 August 2025

14 August 2025

11 August 2025

11 August 2025

19 Juli 2025

15 Juli 2025

Sav Manualer

Nyeste Sav Manualer

Tanaka ECV-5601 Manual

13 September 2025

Tanaka TCS 33EB Manual

13 September 2025

Tanaka TCS 2800S Manual

13 September 2025

Tanaka TCS 33EDP Manual

13 September 2025

Tanaka TCS 51EA Manual

13 September 2025

Hitachi C 10FSHPS Manual

13 September 2025

Metabo C7BUR Manual

12 September 2025

Hitachi C 7BUR Manual

12 September 2025

Metabo C3607DWAQ4 Manual

12 September 2025

Metabo C7SB3 Manual

12 September 2025