Makita SP6000J Manual

Makita Sav SP6000J

Læs gratis den danske manual til Makita SP6000J (40 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Makita SP6000J, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

INSTRUCTION MANUAL

MANUEL D'INSTRUCTION

MANUAL DE INSTRUCCIONES

DOUBLE INSULATION

DOUBLE ISOLATION

DOBLE AISLAMIENTO

Plunge Cut Circular Saw

Scie circulaire pour coupe en

plongée

Sierra circular de corte de cavidad

SP6000

007654

ENGLISH

SPECIFICATIONS

Model SP6000

Blade diameter 165 mm (6-1/2")

at 90° 56 mm (2-3/16")

at 45° 40 mm (1-9/16") Max. cutting depth

at 48° 38 mm (1-1/2")

No load speed (RPM) 2,000 - 5,200/min

Overall length 341 mm (13-3/8")

Net weight 4.4 kg (9.7 lbs)

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

GEA001-3

GENERAL SAFETY RULES

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock, fire

and/or serious injury. The term "power tool" in all of the

warnings listed below refers to your mains-operated

(corded) power tool or battery-operated (cordless) power

tool.

SAVE THESE INSTRUCTIONS.

Work area safety

1. Keep work area clean and well lit. Cluttered and

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

Personal Safety

9. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

10. Use safety equipment. Always wear eye

protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries.

11. Avoid accidental starting. Ensure the switch is

in the off-position before plugging in. Carrying

power tools with your finger on the switch or

plugging in power tools that have the switch on

invites accidents.

12. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

13. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

14. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving

parts.

15. If devices are provided for the connection of

dust extraction and collection facilities,

ensure these are connected and properly used.

Use of these devices can reduce dust-related

hazards.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Sav
Model:	SP6000J
Bredde:	225 mm
Dybde:	346 mm
Højde:	252 mm
Vægt:	4400 g
Produktfarve:	Black,Blue
Produkttype:	Kompakt sav
Indgangseffekt:	1300 W
Udgangseffekt:	750 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	5800 rpm
Beskyttelsesklasse:	II
Lydeffektniveau:	102 dB
Lydtryksniveau:	91 dB
Vibrationsudledning:	2.5 m/s²
Usikkerhed i lydniveauet:	3 dB
Blad, diameter:	165 mm
Savblade inkluderet:	Ja
Usikkerhed - k:	1.5 m/s²
Skæredybde (45º):	40 mm
Skæredybe (90º):	57 mm
Diamantskive:	Ingen
Klinge diameter (min):	20 mm