Makita XPH012 Manual

Makita bore XPH012

Læs gratis den danske manual til Makita XPH012 (32 sider) i kategorien bore. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Makita XPH012, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/32
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
IMPORTANT: Read Before Using.
IMPORTANT: Lire avant usage.
IMPORTANTE: Leer antes de usar.
Cordless Impact Driver
Tournevis à Chocs sans Fil
Atornillador de Impacto Inalámbrico
LXDT01
LXDT02
011185
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model LXDT01 LXDT02
Machine screw 4 mm - 8 mm (5/32" - 5/16") 4 mm - 8 mm (5/32" - 5/16")
Standard bolt 5 mm - 14 mm (3/16" - 9/16") 5 mm - 14 mm (3/16" - 9/16") Capacities
High tensile bolt 5 mm - 12 mm (3/16" - 1/2") 5 mm - 12 mm (3/16" - 1/2")
Hammer mode (Hard) 0 - 2,600/min. 0 - 2,400/min.
Hammer mode (Medium) 0 - 2,000/min. 0 - 1,800/min. No load speed (RPM)
Hammer mode (Soft) 0 - 1,300/min. 0 - 1,100/min.
Hammer mode (Hard) 0 - 3,400 0 - 3,200
Hammer mode (Medium) 0 - 2,800 0 - 2,600
Impacts per minute
Hammer mode (Soft) 0 - 1,300 0 - 1,100
Overall length 139 mm (5-1/2") 139 mm (5-1/2")
Net weight (with battery cartridge) 1.3 kg ( 2.8 lbs) 1.4 kg ( 3.1 lbs)
Rated voltage D.C.18 V D.C.14.4 V
Standard battery cartridge BL1815/BL1830 BL1430
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions

Produkt Specifikationer

Mærke: Makita
Kategori: bore
Model: XPH012

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita XPH012 stil et spørgsmål nedenfor, og andre brugere vil svare dig


bore Makita Manualer

Makita

Makita DHR263ZJ Manual

12 Oktober 2024
Makita

Makita HP2070 Manual

12 Oktober 2024
Makita

Makita DDA350RFJ Manual

7 Oktober 2024
Makita

Makita HP332D Manual

7 Oktober 2024
Makita

Makita M6501 Manual

6 Oktober 2024
Makita

Makita DDF453SFE Manual

2 Oktober 2024
Makita

Makita 8434DWFE Manual

1 Oktober 2024
Makita

Makita DF030DWJ Manual

28 September 2024
Makita

Makita HR2610 Manual

23 September 2024
Makita

Makita DHP453Z Manual

15 September 2024

bore Manualer

Nyeste bore Manualer

Einhell

Einhell BM-G1100 E Manual

14 Oktober 2024
Sun Joe

Sun Joe 24V-DDK-LTX-PNK Manual

14 Oktober 2024
DeWalt

DeWalt DWD450 Manual

14 Oktober 2024
Rupes

Rupes BH 252R Manual

13 Oktober 2024
Einhell

Einhell TE-ID 750/1 E Manual

7 Oktober 2024
Metabo

Metabo BH 18 LTX BL 16 Manual

6 Oktober 2024
Metabo

Metabo BE 75-X3 Quick Manual

5 Oktober 2024
Metabo

Metabo BE 75-16 Manual

5 Oktober 2024
Hitachi

Hitachi DH 45SA Manual

4 Oktober 2024
Black And Decker

Black And Decker XD1200 Manual

4 Oktober 2024