Manitowoc K00470 Manual

Manitowoc Ismaskine K00470

Læs gratis den danske manual til Manitowoc K00470 (1 sider) i kategorien Ismaskine. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Manitowoc K00470, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Instruction Sheet

Subject: K00470 K00472 K00473 Bin Adapter

BIN ADAPTER

K00470  30” ICE MACHINE ON 48” BIN

K00472  22” ICE MACHINE ON A 30” BIN

K00473  22” ICE MACHINE ON A 48” BIN

1 of 1

Document Number: 000015255 Rev 01 1/18

MANITO W O C ICE

2110 SOUTH 26TH STREET, MANITOWOC, WI 54220

844724CARE

WWW.MANITOWOCICE.COM

Warning

Authorized Service Representatives are obligated to follow

industry standard safety procedures, including, but not

limited to, local/national regulations for disconnection

/ lock out / tag out procedures for all utilities including

electric, gas, water and steam.

These instructions are used for installing the following:

• 22” ice machines on 30” B, K or D model bins

• 22” ice machines on 48” B, K or D model bins

• 30” ice machines on 48” B, K or D model bins

1. Remove protective coating from support rail and bin

adapter prior to assembly.

2. Refer to drawing and place support in position. Angled

flange of support must face the front of the bin. Apply

foam tape on top of the support.

3. Place bin adapter on bin - No fasteners are required.

4. Apply foam tape from the kit around bin top opening.

A. Foam tape applied to the front of the bin opening

must be located under the ice machine bottom rail.

B. Apply foam tape around the sides and rear of the

bin top opening.

5. Place bin in final position and adjust legs to level bin in

all directions.

6. Refer to Ice Machine Installation Manual for ice machine

installation. Clean and sanitize the ice machine and bin

when installation is complete.

Angled ends must face toward

front of bin/ice machine

Foam tape must be located

underneath the front ice

machine bottom rail.

Install Foam Tape around

bin top opening

Produkt Specifikationer

Mærke:	Manitowoc
Kategori:	Ismaskine
Model:	K00470

Har du brug for hjælp?

Hvis du har brug for hjælp til Manitowoc K00470 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ismaskine Manitowoc Manualer

Manitowoc RFF2500A Manual

13 Oktober 2025

Manitowoc QM-45A Manual

13 Oktober 2025

Manitowoc ID-0522A Manual

13 Oktober 2025

Manitowoc RFS-0300A Manual

13 Oktober 2025

Manitowoc Q170 Manual

13 Oktober 2025

Manitowoc IY-0606A Manual

12 Oktober 2025

Manitowoc Q210 Manual

12 Oktober 2025

Manitowoc B-400 Manual

12 Oktober 2025

Manitowoc RFF1300 Manual

12 Oktober 2025

Manitowoc ID-0592N Manual

12 Oktober 2025

Ismaskine Manualer

Nyeste Ismaskine Manualer

Edgestar IB250SS Manual

11 December 2025

Edgestar IB450SS Manual

10 December 2025

Avallon AIMG151PSSILH Manual

9 December 2025

U-Line UHCP115-SS81A Manual

9 December 2025

Maestro MR-820 Manual

6 December 2025

SPT SZB-20 Manual

5 December 2025

Marvel MLCP215-IS01B Manual

3 December 2025

Marvel MPNP415-SS81A Manual

3 December 2025

SPT KI-15 Manual

2 December 2025

Vevor SKF-C50F Manual

2 December 2025