MM860 Installation Instructions
Please read this entire manual before you begin. 
Do not unpack any contents until you verify all requirements on PAGE 3. 
If you have any questions, visit MantelMount.com or call (800)-897-9755. 
             
This  product  contains  small  parts  that  can  be  a 
choking hazard.    let  children play  with  any  of Do  not
these small parts! Keep children away from the work 
area during installation.
Do  not  use  this  product  in  any  way,  or  for  any 
purpose, that is not specifically described in these 
instructions.  MantelMount  is  not  responsible  for 
damage or injury caused by incorrect installation 
or improper use.
MantelMount has  three different adjustments 
that  must  be  made  after  the  installation  is 
complete in order to operate properly.
IMPORTANT:
This  product  is  intended  to  be  installed  by 
professional  installation  contractors,  or  persons 
familiar with the tools and methods required for 
this  installation.  If  you  are  not  sure  about  your 
ability  to  perform  this  installation,  you  must 
contact  a  professional.  MantelMount  is  not 
responsible  for  damage  or  injury  caused  by 
incorrect installation or improper use.
!
CAUTION:
!
CAUTION:
!
WARNING!
             
Do  not  let  children  operate,  pull  on,  or  hang  from 
MantelMount. 
Do not operate MantelMount when anyone is near or 
behind the mount. MantelMount is very strong and can 
result in crushing injuries.  
!
WARNING!
!
WARNING!
             
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! 
The  combined  weight  of  all  components  must  not 
exceed 125 lbs (57 kg).   
             
MantelMount must be installed to a wall or structure 
that is able to hold five times the combined weight of 
all equipment. If you are unsure about your structure, 
a contractor must evaluate your installation.   
!
WARNING!
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
                        PAGE 1
www.MantelMount.com
The bottom travel stop is adjusted 
with two screws and locknuts so 
the TV and mount do not lower all 
the way into the mantel.
Tilt is removed with two screws on 
each side of the swivel mechanism. 
The TV should always be 
vertically parallel to the wall
The side-to-side swivel stops are 
adjusted with two screws with 
locknuts so that the TV does not 
swivel into the mantel.
U.S. Pat. No. 8,864,092
Other Patents Pending