Marmitek Cam 4K Pro Manual

Marmitek Ikke kategoriseret Cam 4K Pro

Læs gratis den danske manual til Marmitek Cam 4K Pro (14 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Marmitek Cam 4K Pro, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/14
Cam 4K Pro
4K conference camera
and speakerphone
Show the whole room during hybrid
meetings and have clear audio for
all participants
- 4K Ultra HD camera
- wide angle view
- omni-directional microphones
- Windows/Mac
Professional Multi language user guide
Set content
1 x Cam 4K Pro
1 x USB-C cable
1 x 3.5mm jack audio cable
1 x power adapter
Safety Instructions
Please read these instructions thoroughly before you
use the device and keep them for future reference.
Only for indoor use.
Do not use the product in a damp environment or
near water.
Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of
children.
Connect the adapter to the mains only after you have
verified that the line voltage corresponds to the value
specified on the type plates.
Disconnect the AC/DC power adapter from the mains
when this device is not in use for prolonged time.
Never connect an adapter or power cord when it is
damaged. In that case, contact your supplier.
Never open the product: the device may contain parts
with deadly voltage.
Repairs or service should only be performed by
qualified personnel.
Improper use, self installed modifications or repairs -
will void any and all warranties.
Marmitek does not accept any product responsibility
for incorrect use of the product or use other than for
which the product is intended.
Marmitek does not accept liability for any
consequential damage other than the legal product
responsibility.
Setup
When installing the Cam 4K Pro, attach the included
power cord to the “DC IN” on the back interface of the
conference camera and the adapter to a power socket.
When the cord is connected , the Cam 4K successfully
Pro will start. During the startup procedure, you will hear
the startup sound and the Marmitek logo will be lit up.
Device connection via USB
The first way to connect the Cam 4K Pro is by using the
USB connection. By connecting the Cam 4K Pro with
the USB cable, you can use all included functions.
In order to this, connect the included USB cable to do
the port marked “USB” on the back interface of the Cam
4K Pro. The other end of the USB cable will need to go
into the device you want to connect to the camera, like
for example a PC. When these two are connected, the
PC will recognize the Cam 4K Pro as a speaker, camera
and microphone.
Please note, when using digital meeting software you
sometimes manually need to modify the settings of the
program to use the correct speaker, microphone and
camera. Please refer to the instructions of the meeting
software to you are using see how you can change the
input and output devices within the program.
Device connection via Bluetooth
You can connect a Bluetooth compatible device to the
Cam 4K Pro. When connecting via Bluetooth, you can
only use the Cam 4K Pro’s speaker and microphones .
To pair your Bluetooth device to the Cam 4K Pro, put
the Cam 4K Pro into pairing mode by holding the “BT”
button for 3 seconds To indicate the device is in pairing .
mode, the “BT” button will blink in the color blue. While
in pairing mode luetooth device, you can search for B s
on your device and find the “Cam 4K Pro”. Tap the
“Cam 4K Pro” to pair your device to the conference
camera. After pairing you will hear a connection sound
from the Cam 4K Pro and the “BT” button will stop
blinking.
Device connection via 3.5mm jack cable
When you are the 3.5mm connect ing Cam 4K Pro via a
jack cable, you can only play audio over the speaker.
In order to connect the , take the included Cam 4K Pro
3.5mm jack cable and connect this to the “AUX” port on
the back interface of the conference camera. Take the
other end of the cable and attach this to a source device
with an analogue audio output.
Buttons and features
The buttons on the Cam 4K Pro let you control the
conference camera. The following controls can be used:
Button
Function
Short press: volume up
Short press: volume down
Short press: mute/unmute
microphone
Short press: disable/enable
camera

Produkt Specifikationer

Mærke: Marmitek
Kategori: Ikke kategoriseret
Model: Cam 4K Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til Marmitek Cam 4K Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Marmitek Manualer

Marmitek

Marmitek LM15 Manual

7 Oktober 2024
Marmitek

Marmitek Connect TS21 Manual

17 September 2024
Marmitek

Marmitek Glow MI Manual

21 August 2024
Marmitek

Marmitek IRRF7243 Manual

16 August 2024
Marmitek

Marmitek Split 422 Manual

15 August 2024
Marmitek

Marmitek Split 412 Manual

14 August 2024
Marmitek

Marmitek AMM31 Manual

12 August 2024
Marmitek

Marmitek DAIX12 Manual

12 August 2024
Marmitek

Marmitek Speaker Anywhere 352 Manual

11 August 2024
Marmitek

Marmitek SAX4 Manual

11 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikea

Ikea STRANDMOLKE 904.572.12 Manual

1 Juli 2025
Mercyu

Mercyu MRU-52G Manual

1 Juli 2025
SHX

SHX CSTAR01 Manual

1 Juli 2025
OmniMount

OmniMount OmniBasics OB60FM Manual

1 Juli 2025
Daikin

Daikin EKRUCBSA Manual

1 Juli 2025
Daikin

Daikin REYA12A7Y1B Manual

1 Juli 2025
SilverCrest

SilverCrest SRGS 1400 E1 Manual

1 Juli 2025
Braun

Braun MultiMix 2 HM 2110 Manual

1 Juli 2025
SilverCrest

SilverCrest SCP 10000A1 Manual

1 Juli 2025
Ikea

Ikea VESTERÖY 105.119.01 Manual

1 Juli 2025