Marmitek IRCP Manual

Marmitek Kabler til pc'er og periferiudstyr IRCP

Læs gratis den danske manual til Marmitek IRCP (2 sider) i kategorien Kabler til pc'er og periferiudstyr. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Marmitek IRCP, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
20334 / 20091221 • IRCP blinking 2 LED
ALL RIGHTS RESERVED MARMITEK ©
IR Control Pro System™
DECLARATION OF CONFORMITY
IRCP blinking 2 LED
Hereby, Marmitek BV, declares that this IR Control Pro System is in compliance with the essential requirements
and other relevant provisions of the following Directives:
DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the
approximation of the laws of the Member States relating to electromagnetic compatibility
Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the
laws of Member States relating toelectrical equipment designed for use within certain voltage limits
Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of
certain hazardous substances in electrical and electronic equipment
Hiermit erklärt Marmitek BV die Übereinstimmung des Gerätes IR Control Pro System den grundlegenden
Anforderungen und den anderen relevanten Festlegungen der Richtliniën:
RICHTLINIE 2004/108/EG DES EUROPÄISCHEN PARLAMENTS UND DES RATES vom 15. Dezember 2004 zur Angleichung
der Rechtsvorschriften der Mitgliedstaaten über die elektromagnetische Verträglichkeit
Richtlinie 2006/95/EG des Europäischen Parlaments und des Rates vom 12. Dezember 2006 zur Angleichung der
Rechtsvorschriften der Mitgliedstaaten betreffend elektrische Betriebsmittel zur Verwendung innerhalb bestimmter
Spannungsgrenzen
Richtlinie 2002/95/EG des Europäischen Parlaments und des Rates vom 27. Januar 2003 zur Beschränkung der
Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten
Par la présente Marmitek BV déclare que l'appareil IR Control Pro System est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directives:
DIRECTIVE 2004/108/CE DU PARLEMENT EUROPÉEN ET DU CONSEIL du 15 décembre 2004 relative au rapprochement
des législations des États membres concernant la compatibilité électromagnétique
Directive 2006/95/CE du Parlement européen et du Conseil du 12 décembre 2006 concernant le rapprochement des
législations des États membres relatives au matériel électrique destiné à être employé dans certaines limites de tension
Directive 2002/95/CE du Parlement européen et du Conseil du 27 janvier 2003 relative à la limitation de l'utilisation de
certaines substances dangereuses dans les équipements électriques et électroniques
Marmitek BV declara que este IR Control Pro System cumple con las exigencias esenciales y con las demás
reglas relevantes de la directriz:
DIRECTIVA 2004/108/CE DEL PARLAMENTO EUROPEO Y DEL CONSEJO de 15 de diciembre de 2004 relativa a la
aproximación de las legislaciones de los Estados miembros en materia de compatibilidad electromagnética
Directiva 2006/95/CE del Parlamento Europeo y del Consejo de 12 de diciembre de 2006 relativa a la aproximación de las
legislaciones de los Estados miembros sobre el material eléctrico destinado a utilizarse con determinados límites de tensión
Directiva 2002/95/CE del Parlamento Europeo y del Consejo de 27 de enero de 2003 sobre restricciones a la utilización de
determinadas sustancias peligrosas en aparatos eléctricos y electrónicos
Con ciò, Marmitek BV, dichiara che il IIR Control Pro System è conforme ai requisiti essenziali ed alter
disposizioni relative alla Direttiva:
DIRETTIVA 2004/108/CE DEL PARLAMENTO EUROPEO E DEL CONSIGLIO del 15 dicembre 2004 concernente il
ravvicinamento delle legislazioni degli Stati membri relative alla compatibilità elettromagnetica
Direttiva 2006/95/CE del Parlamento europeo e del Consiglio del 12 dicembre 2006 concernente il ravvicinamento delle
legislazioni degli Stati membri relative al materiale elettrico destinato ad essere adoperato entro taluni limiti di tensione
Direttiva 2002/95/CE del Parlamento europeo e del Consiglio del 27 gennaio 2003 sulla restrizione dell'uso di determinate
sostanze pericolose nelle apparecchiature elettriche ed elettroniche
Bij deze verklaart Marmitek BV, dat deze IR Control Pro System voldoet aan de essentiële eisen en aan de
overige relevante bepalingen van Richtlijnen:
RICHTLIJN 2004/108/EG VAN HET EUROPEES PARLEMENT EN DE RAAD van 15 december 2004 betreffende de
onderlinge aanpassing van de wetgevingen van de lidstaten inzake elektromagnetische compatibiliteit
Richtlijn 2006/95/EG van het Europees Parlement en de Raad van 12 december 2006 betreffende de onderlinge
aanpassing van de wettelijke voorschriften der lidstaten inzake elektrisch materiaal bestemd voor gebruik binnen
bepaalde spanningsgrenzen
Richtlijn 2002/95/EG van het Europees Parlement en de Raad van 27 januari 2003 betreffende beperking van het gebruik
van bepaalde gevaarlijke stoffen in elektrische en elektronische apparatuur
MARMITEK BV - P.O. BOX 4257 - 5604 EG EINDHOVEN – NETHERLANDS
Technical Specifications
This IR extender cable with 2 blinking LEDs is part of the IR Control Pro System.
The IR extender cable receives infrared commands from the IR System Module
and converts these into infrared signals via the IR LEDs. Install this product
according the user manual of the IR Control Pro System (see
www.marmitek.com).
IR extender cable with 2 blinking LEDs
Connection: 3.5mm jack plug (mono)
IR LEDs: 2x IR LED (blink when transmitting IR signals)
Length of cable: 3 meters (plug to divison 2m, divison to LED 1m)
Copyrights
Marmitek is a trademark of Marmidenko BV | IR Control Pro System™ is a trademark of
Marmitek BV. All rights reserved.
Copyright and all other proprietary rights in the content (including but not limited to model
numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the
Content, but without limitation, distribution, reproduction, modification, display or transmission
without the prior written consent of Marmitek is strictly prohibited. All copyright and other
proprietary notices shall be retained on all reproductions.
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed
of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the government or local authorities. Correct
disposal and recycling will help prevent potential negative consequences to the environment and human health. For more
detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
(1) Locate IR sensor of A/V Device
(2) Remove self-adhesive strip and attach IR LED
IR Sensor
-
+
IR blinking LED

Produkt Specifikationer

Mærke: Marmitek
Kategori: Kabler til pc'er og periferiudstyr
Model: IRCP

Har du brug for hjælp?

Hvis du har brug for hjælp til Marmitek IRCP stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kabler til pc'er og periferiudstyr Marmitek Manualer

Marmitek

Marmitek Connect USB C Hub 4 Manual

2 September 2024
Marmitek

Marmitek IRCP 2 LED Manual

28 Juli 2024
Marmitek

Marmitek IR Eye Manual

28 Juli 2024
Marmitek

Marmitek IRCP Manual

28 Juli 2024

Kabler til pc'er og periferiudstyr Manualer

Nyeste Kabler til pc'er og periferiudstyr Manualer

Tripp Lite

Tripp Lite P580-015 Manual

3 April 2025
Wire Technologies

Wire Technologies CAB-Q-Q-100G-1M-WR Manual

2 April 2025
Wire Technologies

Wire Technologies SFP-10G-AOC-30M Manual

2 April 2025
Wire Technologies

Wire Technologies CAB-Q-Q-100G-0.5M-WR Manual

2 April 2025
Wire Technologies

Wire Technologies JNP-10G-AOC-3M-WR Manual

2 April 2025
Wire Technologies

Wire Technologies AOC-S-S-10G-10M-WR Manual

2 April 2025
Wire Technologies

Wire Technologies AOC-S-S-10G-7M-WR Manual

2 April 2025
I-Tec

I-Tec C31DP60HZP Manual

2 April 2025
Rocstor

Rocstor Y10A315-S1 Manual

1 April 2025
Lindy

Lindy 38503 Manual

19 Marts 2025