Marmitek Link ME Manual

Marmitek Ikke kategoriseret Link ME

Læs gratis den danske manual til Marmitek Link ME (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Marmitek Link ME, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Safety Instructions

Please read these instructions thoroughly before you

use the device and keep them for future reference.

• Only for indoor use.

• Do not expose the product to extremely high or low

temperatures, strong light sources or direct sunlight.

• This product is not a toy. Keep out of reach of

children.

• Repairs or service should only be performed by

qualified personnel.

Requirements

This product requires a stable working Wi-Fi network

(user name/password) connected to the Internet.

Product introduction

The wired Zigbee gateway is the central component of

the Zigbee network. Zigbee products (intelligent

switches, power outlets, door magnets, PIR and other

products) are added to the network through the gateway

to establish communication with other Zigbee products.

The gateway is connected to the router via the network

cable to establish communication with the Cloud and the

Smart me app. The Zigbee products can be viewed and

controlled via the app.

Installation of the Smart me app

Download and install the Marmitek Smart me app from

the Apple app store or the Google Play store.

Launch the Smart me app after installation is completed.

Follow the instructions and register for a new account.

Installation of the Link ME

Make sure your smartphone is connected to the router's

wifi network to which you are going to connect the Link

ME.

Make sure the is powered via the Micro USB Link ME

connector and connect the network cable to the Link ME

and your router.

Check that the network light is on continuously, if not,

press the reset button until the network light comes on

continuously.

Launch the Smart me app from your smartphone or

tablet.

Click on the + (top right corner) to add a new product,

confirm that the network light flashes quickly and follow

the instructions.

Press Help button during installation for more

information or when installation fails.

Notes for using the product

After installation is complete, you can use Link ME to

install Zigbee products using the app.

Check our website www.marmitek.com for more

details and how to use the Smart me products.

Technical specifications

Supported devices max. 128

Connection RJ45 port

Wireless technology Zigbee 3.0

Operating range up to 30 meters

Power -100 240 VAC 50/60 Hz, 5

VDC micro USB adapter

Power consumption (max.) 5W

Standby current < 0.5 W

Dimensions (h x w x d) 90 x 90 x 23 mm

Declaration of Conformity

Hereby, Marmitek BV, declares that the

Link ME is in compliance with the essential

requirements of the 2014/53/EU Directives.

Full Declaration of Conformity is available at

www.marmitek.com/en/declarations- -conformity/ of

More detailed user guide and instructions are available

on our website at www.marmitek.com

Status

Reset button

Network cable

Connect your phone to Wi- Fi

Wifi wireless router

LAN port

Network connection

5 VDC micro USB

Network

Link ME

Produkt Specifikationer

Mærke:	Marmitek
Kategori:	Ikke kategoriseret
Model:	Link ME
Bredde:	90 mm
Dybde:	23 mm
Højde:	90 mm
Produktfarve:	Hvid
Indbygget skærm:	Ingen
Pakkedybde:	50 mm
Pakkebredde:	100 mm
Pakkehøjde:	130 mm
Ethernet LAN:	Ja
Hurtig start guide:	Ja
Kabler inkluderet:	LAN (RJ-45),USB
Pakketype:	Kasse
Forbindelsesteknologi:	Kabel & trådløs
Certificering:	CE
AC-adapter inkluderet:	Ja
Indgangsspænding:	100 - 240 V
Indgangsfrekvens:	50/60 Hz
Antal understøttede enheder:	128
Gear rækkevidde:	0 - 30 m
ZigBee:	Ja