Marmitek Push LO Manual


Læs gratis den danske manual til Marmitek Push LO (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Marmitek Push LO, eller vil du spørge andre brugere om produktet?

Side 1/8
Package content
Marmitek Smart me app Multi language user guide
smart switch
CR2430 battery
3M adhesive tape
quick guide
This product requires a Zigbee gateway
(sold separately).
Push LO WHT/BLK
Smart Zigbee switch
Battery powered
multi-function 2 buttons
on-wall
scene activation
Safety Instructions
Please read these instructions thoroughly before you
use the device and keep them for future reference.
Only for indoor use.
Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of
children.
Dispose of batteries as chemical waste. Remove the
batteries when you are not using the system for a
longer period of time. Check the polarity (+/ ) of the -
batteries when inserting them in the product. Wrong
positioning can cause an explosion.
Repairs or service should only be performed by
qualified personnel.
Requirements
This product requires a Smart me Zigbee Gateway (sold
separately) that is connected to the Internet. Follow the
instructions for the Smart me Gateway to add it.
Installation of the Smart me app
Download and install the Marmitek Smart me app from
the Apple app store or the Google Play store.
Launch the Smart me app after installation is completed.
Follow the instructions and register for a new account.
Installation of the Push LO
Open the Push LO housing by sliding the front to the
left and pull the plastic battery strip to activate the
battery.
The indicator light should start flashing rapidly. If the
light does not blink, press push button 1 for 10
seconds until it starts to blink.
Launch the Smart me app from your smart phone or
tablet.
Select the Smart me Zigbee Gateway.
Click on the + (at the bottom of the screen) to add a
new product, confirm that the indicator light is flashing
quickly and follow the instructions.
Press Help button during installation for more
information or when installation fails.
Notes for using the product
After the installation is completed you can configure
the Push LO by using the app.
Check our website www.marmitek.com for more
details and how to use the Smart me products.
Technical specifications
Triggered action One click, double click, long
press 5s
Battery life 50.000 clicks
- 2 years @ 30 per day
Wireless technology Zigbee 3.0
Operating range up to meters in open area 30
Power Battery CR2430
Standby current 20μA
Dimensions (h x w x d) 86 x 86 x 13 mm
IP code 20 (not dust proof, not
waterproof)
Declaration of Conformity
Hereby, Marmitek BV, declares that the
Push LO is in compliance with the essential
requirements of the 2014/53/EU Directives.
Full Declaration of Conformity is available at
www.marmitek.com/en/declarations- -conformity/ of
More detailed user guide and instructions are available
on our website at www.marmitek.com
B utton 1


Produkt Specifikationer

Mærke: Marmitek
Kategori: Ikke kategoriseret
Model: Push LO

Har du brug for hjælp?

Hvis du har brug for hjælp til Marmitek Push LO stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Marmitek Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer