Martha Stewart MTS-SBLD1 Manual

Martha Stewart Græstrimmer MTS-SBLD1

Læs gratis den danske manual til Martha Stewart MTS-SBLD1 (16 sider) i kategorien Græstrimmer. Denne vejledning er vurderet som hjælpsom af 84 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 42.5 anmeldelser. Har du et spørgsmål om Martha Stewart MTS-SBLD1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
Model MTS-SBLD1 Form No. SJ-MTS-SBLD1-880E-M
OPERATOR’S MANUAL
ELECTRIC TRIMMER + EDGER
11.5IN | 4.5 AMP | STRINGLESS
© 2018 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
mCAUTION!
Before using this electric tool, carefully read and observe the
safety rules and instructions listed below. Before starting work,
make sure that you know how to stop the machine in case of
an emergency. The incorrect use of this machine could cause
serious injury. Keep these instructions in a safe place and on
hand so that they can be consulted when required.
mCAUTION!
The electric grass trimmer + edger should only be used for
cutting lawns and for trimming along the borders of ower
beds. Other uses of the trimmer + edger that are not indicated
in these instructions could damage the trimmer + edger or
seriously injure the operator.
GENERAL Safety Rules
mWARNING! When using the electric grass trimmer
+ edger basic safety precautions should always be followed
to reduce the risk of re, electric shock, and personal injury,
including the following:
A) FOR ALL DOUBLE–INSULATED APPLIANCES
1. Replacement parts – When servicing, use only identical
replacement parts.
2. Polarized appliance connections – To reduce the risk
of electric shock, this appliance has a polarized plug (i.e.
one blade is wider than the other) and will require the use
of a polarized extension cord. The appliance plug will t
into a polarized extension cord only one way. If the plug
does not t fully into the extension cord, reverse the plug.
If the plug still does not t, obtain a correct polarized
extension cord. This plug will t into the polarized wall
outlet only one way. If the plug still does not t fully into
the wall outlet, reverse the plug. If the plug still does not
t, contact a qualied electrician to install a proper wall
outlet. Do not change the appliance plug, extension cord
receptacle, or extension cord plug in any way.
B) FOR ALL APPLIANCES
1. Avoid dangerous environments – Do not use appliances
in damp or wet locations. Do not use in rain.
2. Keep children and bystanders away – Children and
other spectators, including pets, should be kept at least
50 feet (15 meters) away from the work area. When the
grass is cut, stones and debris contained in the grass can
be picked up by the trimmer + edger and dispersed into
the air. These ying projectiles can cause blindness or
other bodily injury.
3. Dress properly – Always wear suitable clothing when
using the trimmer + edger to prevent head, hand, or feet
injuries. Do not wear loose clothing or jewelry. They can
get caught in moving parts.
4. Use safety glasses – Also use safety footwear,
snug-tting clothing, protective gloves, hearing and head
protection.
5. Use the right tools – Do not use tools for any job except
that for which they are intended.
6. Avoid unintentional starting – Do not carry plugged-in
tool with nger on the trigger. Make sure the switch is o
before plugging in the tool.
7. Do not abuse the cord – Never carry the tool by the cord
or yank the cord to disconnect it from the receptacle.
Keep cord away from heat, oil, and sharp edges.
8. Do not force the tool – It will do the job better and with
less likelihood of injury if it is used at the rate for which it
was designed.
9. Do not overreach – Keep proper footing and balance at
all times.
10. Stay alert – Watch what you are doing. Use common
sense. Do not operate the trimmer + edger when you are
tired, or under the inuence of alcohol or drugs.
11. Disconnect the tool – Turn the trimmer + edger o and
disconnect the plug when: the trimmer + edger is not in
use; it is left unattended; it is being examined because it is
not working correctly; the power supply cable is damaged;
the trimmer line is being removed or changed or when
the trimmer + edger is being moved from one place to
another.
12. Store idle tools indoors – When not in use, tools should
be stored indoors in a dry and high or locked-up place out
of the reach of children.
13. Maintain tools with care – Keep cutting edges sharp
and clean for best performance and to reduce the risk
of injury. Follow instructions for lubricating and changing
2
accessories. Inspect the trimmer + edger periodically and
replace if damaged. Repair the trimmer + edger only at an
authorized service facility. Keep handles dry, clean, and
free from oil and grease.
14. Checked for damaged parts – Before continuing to use
the trimmer + edger, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function. Check
for the alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition that
may aect the trimmer + edger’s operation. A guard or
other part that is damaged should be properly repaired or
replaced by an authorized service center unless indicated
elsewhere in this manual.
C) ADDITIONAL SAFETY INSTRUCTIONS FOR GRASS
TRIMMER + EDGER
1. Keep guards in place and in working order.
2. Keep hands and feet away from the cutting area.
WARNING! Never use steel blades or other devices.
Use of any other accessories or attachments will increase the
risk of injury.
CAUTION!
The safety guard is critical to the safety of the operator and the
safety of people standing within a safe distance of the trimmer
+ edger. The safety guard keeps the trimmer + edger in good
working order and must always be in place during operation.
• Do not try to stop the cutting device (SharperBlade™) with
your hands. Always let it come to a stop by itself.
WARNING! After switching o the tool, the cutting
device (SharperBlade™) continues to rotate for a few
seconds.
• Only use the original type of SharperBlade™. Do not under
any circumstances use metal line or nylon line instead of
SharperBlade™.
• Do not use the tool to cut grass which is not on the ground.
For example, do not cut grass growing on walls or rocks.
• Do not switch on the tool in an enclosed or poorly ventilated
space or in the presence of ammable and/or explosive
substances such as liquids, gases and powders.
• Only cut during broad daylight or with adequate articial
light.
• Check that all grass cuttings and dirt have been removed
from the ventilation vents.
• Do not cross roads or gravel paths while the tool is still
running.
• When the tool is not in use, store it in a dry place and out of
reach of children.
• After use, disconnect the tool from the power supply and
check for damage. If you have the slightest doubt about the
condition of the tool, contact an authorized service center.
• Only use the tool according to the instructions given in this
manual.
• Check regularly that the screws are tight.
• Do not try to repair the tool or access internal parts. Contact
an authorized service center.

Produkt Specifikationer

Mærke: Martha Stewart
Kategori: Græstrimmer
Model: MTS-SBLD1

Har du brug for hjælp?

Hvis du har brug for hjælp til Martha Stewart MTS-SBLD1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Græstrimmer Martha Stewart Manualer

Martha Stewart

Martha Stewart MTS-SBLD1 Manual

14 Oktober 2022

Græstrimmer Manualer

Nyeste Græstrimmer Manualer

Bosch

Bosch ART 26 Manual

12 Oktober 2025
Shindaiwa

Shindaiwa C302TS Manual

8 Oktober 2025
Shindaiwa

Shindaiwa B410S Manual

8 Oktober 2025
Shindaiwa

Shindaiwa C3410 Manual

8 Oktober 2025
Shindaiwa

Shindaiwa T3410 Manual

7 Oktober 2025
Shindaiwa

Shindaiwa T281TS Manual

6 Oktober 2025
Shindaiwa

Shindaiwa T361T Manual

6 Oktober 2025
Shindaiwa

Shindaiwa T251 Manual

6 Oktober 2025
Shindaiwa

Shindaiwa T263TXS Manual

6 Oktober 2025
Shindaiwa

Shindaiwa C303TS Manual

6 Oktober 2025