Martin Audio Screen 5 Manual


Læs gratis den danske manual til Martin Audio Screen 5 (14 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Martin Audio Screen 5, eller vil du spørge andre brugere om produktet?

Side 1/14
Martin Audio – CINEMA SERIES
CONTENTS (ENGLISH) Page No
1 INTRODUCTION 2
2 UNPACKING 2
3 ASSEMBLY OF HORN SUPPORT 3
4 INPUT CONNECTIONS 4
5 SAFETY FIRST 4
6 SYSTEM CONNECTIONS 5
6.1 Wiring recommendations 5
6.2 Power amplifier requirements 6
7 CMX1A/CMX2A/CMX3A OPERATION 6
8 SPEAKER PLACEMENT 7
8.1 Vertical placement 7
8.2 Horizontal spacing 7
8.3 Horn aiming 8
8.3.1 Vertical Plane 8
8.3.2 Horizontal Plane 8
9 WARRANTY 9
10 TECHNICAL SPECIFICATIONS 10
MARTIN AUDIO
LONDON
The Martin Experience
All material © 2007. Martin Audio Ltd. Subject to change without notice.
CONTENTS
<
>
PRINT
GUIDES
1 INTRODUCTION
Thank you for purchasing a Martin Audio Cinema Series, Screen Channel
system. As film industry technology produces increasingly wide-ranging
digital sound tracks, accommodating ever more complex special effects,
traditional 2-way sound reinforcement systems are hard pushed to translate
the full movie experience to audiences in the auditorium.
Martin’s entry to cinema sound has been nothing short of revolutionary.
The adaptation of new 3-way technology by Martin’s design team, honed to
meet the real demands of cinema installation today, has resulted in the
dedicated Martin Audio Cinema Series. The core products, Screen 2, 4, 5
and Screen Sub 1 loudspeakers are built to accommodate the various
digital formats of modern film, providing the essentials of low distortion,
wide bandwidth and uniform coverage.
Martin Audio Surrounds, including the Effect 5, 3 and 3R complete the
picture.
Your screen channel system is shipped in two cartons. One carton
containing the low frequency section and the second containing the
mid/high section, bracket and hardware.
2 UNPACKING
Each Martin Screen Channel System is built to the highest standard and
thoroughly inspected before it leaves the factory. After unpacking the unit,
examine it carefully for any signs of transit damage and inform your dealer
if any such damage is found. It is suggested that you retain the original
packaging so that the unit can be repacked at a future date if necessary.
Please note that Martin Audio and its distributors cannot accept
responsibility for damage to any returned product through the use of non-
approved packaging.
Martin Audio – CINEMA SERIES
ENGLISH
2
This equipment conforms to the requirements of the
EMC Directive 89/336/EEC, amended by 92/31/EEC
and 93/68/EEC and the requirements of the Low
Voltage Directive 73/23/EEC, amended by 93/68/EEC.
Standards Applied EMC Emission EN55103-1:1996
Immunity EN55103-2:1996
Electrical Safety EN60065:1993
All material © 2007. Martin Audio Ltd. Subject to change without notice.
CONTENTS
<
>
PRINT
GUIDES


Produkt Specifikationer

Mærke: Martin Audio
Kategori: Ikke kategoriseret
Model: Screen 5

Har du brug for hjælp?

Hvis du har brug for hjælp til Martin Audio Screen 5 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Martin Audio Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer