Martin Logan Statement Manual


Læs gratis den danske manual til Martin Logan Statement (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Martin Logan Statement, eller vil du spørge andre brugere om produktet?

Side 1/8
S E T - U P M A N U A L F O R T H E
S T A T E M E N T S Y S T E M
Page 2 STATEMENT Set-up Manual
Introduction
System Set-up
Room Acoustics
Troubleshooting
Contents
2
2
6
8
Introduction
Congratulations! You are about to experience the
highest resolution, most dynamic, extended sound-
stage system in the galaxy, the Statement!
The Martin-Logan STATEMENT represents the
culmination of an intensive, dedicated group research
program directed toward establishing a world class
reference system utilizing leading-edge technology,
without compromising durability, reliability, craftsman-
ship, or aesthetic design.
As a result of our continuous research and develop-
ment program here at Martin-Logan, we decided that it
was time to incorporate some of our latest technolo-
gies into a reference product.
System Set-up
ChecklistChecklistChecklistChecklistChecklist
The Statement system consists of the following items:
2 - electrostatic panels mounted in frames
2 - electrostatic panel pedestals with uprights
2 - interface modules
4 - interface riser blocks
2 - woofer columns
2 - crossover modules*
2 - crossover power supplies*
1 - toolkit
4 - power cords*
* Add two more if system is balanced.
Before setting-up the system, please make note that
odd serial numbers for all components (woofer tower,
stator, interface, crossover, power supply (example:
XICL001)) are matched for use as the right channel,
while even serial numbers for all components are
matched for the left channel.
WW
WW
Woofer Assembliesoofer Assemblies
oofer Assembliesoofer Assemblies
oofer Assemblies
The woofer assemblies are connected to the amplifier
via either the 5-way binding posts or screw terminals on
the backplate of the woofer column. As can be seen from
the back panel of the Statement woofer, the signal
connectors are strapped in such a way that you can use
one amplifier out of the box.
If you desire or require double amplification, the electronic
crossover modules have dual, low-level, low-pass,
outputs. By removing the straps on the woofer backplate
you can directly access, via one set of 5-way binding
posts, two woofers at a time. Hence you are able to use
two bass amplifiers. This option is available for the
consideration of amplifiers which do not perform their best
into a 2 ohm load. When using two amplifiers, each one
will see only a 4 ohm load.
Electrostatic PElectrostatic P
Electrostatic PElectrostatic PElectrostatic Panel Assembliesanel Assemblies
anel Assembliesanel Assembliesanel Assemblies
The electrostatic panel assemblies should first be
assembled mechanically. The method of assembly
consists of setting the pedestal on the floor then sliding
the left and right upright braces on to their hidden
fasteners. Observe figure 1. Next, bring the electrostatic
panel assembly to the braces and attach via the hidden
fasteners. Finally, attach the interface riser blocks via the
hidden fasteners and install the interface module on-top
of the risers.


Produkt Specifikationer

Mærke: Martin Logan
Kategori: Ikke kategoriseret
Model: Statement

Har du brug for hjælp?

Hvis du har brug for hjælp til Martin Logan Statement stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Martin Logan Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer