Martin DJ Spinner Manual

Martin Ikke kategoriseret DJ Spinner

Læs gratis den danske manual til Martin DJ Spinner (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Martin DJ Spinner, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Spinner

users guide

INTRODUCTION

The Martin Professional is a powerful but compact lighting eectDJ Series Spinner

producing a stunning and colourful display. The Spinner features:

300 W / 120 V halogen (DRA) or 300 W / 230 V halogen lamp according to the model

(115 V / 230 V).

Bright light output.

Colours produced from dichroic lters.

Sound activated beam pattern and colour change.

Light can be continuously on or sound activated.

Built-in microphone with automatic gain control (A.G.C.).

Eective fan cooling.

Adjustable mounting bracket.

Can be controlled in multiples by a lighting controller.

HOW TO INSTALL THE SPINNER

Before operating the Spinner, you will need to install the lamp and t a plug on the mains

lead. Please do as follows:

IMPORTANT

Before attempting any of the following please ensure that the unit is

disconnected from any mains power.

Remove the nger screw on the lid located on the back of the unit and withdraw the

lamp-socket assembly.

Hold the lamp by the ceramic parts or hold in a clean cloth, taking care not to touch the

glass, and then push the lamp rmly into the lamp-socket. If you do touch the glass part

of the lamp you must clean it thoroughly with alcohol before use. Ensure that the lamp

matches the voltage and wattage specications listed in the ’Technical Specications’

table on page 3.

Insert the lamp into the reector by replacing the lamp-socket assembly, and then tighten

the nger screw.

The Spinner may be delivered from factory without any plug on the mains lead. You must

t a suitable plug (one that ts your local wall outlet) before you can connect the unit to

the mains. The double isolated mains lead on the Spinner contains three wires. The

brown wire should be connected to LIVE, the blue wire to NEUTRAL, and the

Yellow/Green wire to EARTH (ground).

You can now install the Spinner in the desired position. The mounting bracket allows you

to tilt and turn the unit.

Produkt Specifikationer

Mærke:	Martin
Kategori:	Ikke kategoriseret
Model:	DJ Spinner

Har du brug for hjælp?

Hvis du har brug for hjælp til Martin DJ Spinner stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Martin Manualer

Martin VC-Strip Manual

16 Juni 2025

Martin VC-Grid Manual

8 Juni 2025

Martin VC-Strip 60 Manual

7 Juni 2025

Martin VC-Grid 60 Manual

7 Juni 2025

Martin Exterior PixLine 10 Manual

7 Juni 2025

Martin Exterior Dot-HP Manual

7 Juni 2025

Martin VC-Grid 15 Manual

7 Juni 2025

Martin Exterior Dot-1 Pro Manual

25 September 2024

Martin Exterior Dot-9 Pro Manual

25 September 2024

Martin DCE PSU 240 IP Manual

24 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Life On Products LCAEA011 Manual

16 Juni 2025

Philips TAT2719 Manual

16 Juni 2025

Life On Products LCAF001 Manual

16 Juni 2025

Playtive IAN 303900 Manual

16 Juni 2025

Planet Audio PC35B Manual

16 Juni 2025

Philips SCF205 Manual

16 Juni 2025

Enrock Marine EMC56W Manual

16 Juni 2025

Playtive IAN 115579 Manual

16 Juni 2025

Playtive IAN 425617 Manual

16 Juni 2025

Life On Products LCAF017 Manual

16 Juni 2025