Martin Mach MS 3 Manual

Martin Ikke kategoriseret Mach MS 3

Læs gratis den danske manual til Martin Mach MS 3 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Martin Mach MS 3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

MS 3

M20.02

M20.03

Audio Controller

user manual

2 M20.02, M20.03, and MS 3

s e c t i o n 1

I N T R O D U C T I O N

S a f e t y P r e c a u t i o n s

• Read this manual before operating the controller.

• To avoid the risk of electrical shock, do not remove any cover from the controller while it is connected to AC power.

• Do not expose the controller to rain or moisture.

G e n e r a l p r e c a u t i o n s

• Do not operate the controller near heat sources such as radiators, etcetera.

• Connect only to a power supply as marked on the controller.

• Do not drop the controller.

• Do not spill liquids onto or into the controller.

• Refer all service to a qualified technician.

Te c h n i c a l B a c k g r o u n d

When working with loudspeakers, there are 5 decisive factors for maximizing sound quality speaker lifetime:

• excursion control

• input power control

• frequency segmentation

• controller-generated distortion

• controller-generated noise

To avoid mechanical damage to the speaker units, the excursion of the speaker cones must be controlled. The M20.02,

M20.03, and MS 3 accomplish this with a subsonic filter and limitation.

To avoid electrical damage to the speaker units, the power sent to the voice coils must be controlled. The M20.02, M20.03, and

MS 3 use limiters for this purpose.

To get the best sound, the speaker units must be driven within the proper frequency range. This is accomplished by the cross-

over in the M20.02, M20.03, and MS 3. In addition, the controller must not add distortion to the system.

To get the best signal to noise ratio, the noise floor of the controller must be below the general noise. This is achieved by sur-

face mounted device (SMD) technology on double-sided printed circuit boards.

reproduced, in any form or by any means, without

permission in writing from Martin Professional A/S,

Denmark.

Printed in Denmark.

P/N 35020000, Rev. H

Produkt Specifikationer

Mærke:	Martin
Kategori:	Ikke kategoriseret
Model:	Mach MS 3

Har du brug for hjælp?

Hvis du har brug for hjælp til Martin Mach MS 3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Martin Manualer

Martin VC-Grid Manual

8 Juni 2025

Martin VC-Strip 60 Manual

7 Juni 2025

Martin VC-Grid 60 Manual

7 Juni 2025

Martin Exterior PixLine 10 Manual

7 Juni 2025

Martin Exterior Dot-HP Manual

7 Juni 2025

Martin VC-Grid 15 Manual

7 Juni 2025

Martin Exterior Dot-1 Pro Manual

25 September 2024

Martin Exterior Dot-9 Pro Manual

25 September 2024

Martin DCE PSU 240 IP Manual

24 September 2024

Martin P3 PowerPort 500 IP Rental Manual

24 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony RM-V202T Manual

15 Juni 2025

Hughes & Kettner Attax Metroverb Manual

15 Juni 2025

Kohler K-10124 Manual

15 Juni 2025

Planet Audio P9900CPA Manual

15 Juni 2025

Levenhuk LabZZ SP20 Manual

15 Juni 2025

Planet Audio P62CP Manual

15 Juni 2025

Cranborne Audio Carnaby 500 Manual

15 Juni 2025

Audio-Technica AT-VM740xML/H Manual

15 Juni 2025

Stamos SWG-WC-3D Manual

15 Juni 2025

Planet Audio P350MB Manual

15 Juni 2025