Martin Magnum Hazer Manual

Martin Effekt maskine Magnum Hazer

Læs gratis den danske manual til Martin Magnum Hazer (10 sider) i kategorien Effekt maskine. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Martin Magnum Hazer, eller vil du spørge andre brugere om produktet?

Side 1/10
Martin Professional A/S,Olof Palmes Allé 18, DK-8200,Aarhus N
Phone: +45 87 40 00 00 Internet: www.martin.dk
Magnum
Hazer
USER GUIDE
VERSION 1.1
NOTE! The warranty on this machine is conditional on the use of
genuine JEM / Martin fluid only. Other fluids may represent a health
hazard when used in this machine, and may damage the internal
components.
Fluids Suitable for this machine:
Pro-Haze
Fluid
Magnum Hazer
CONNECTIONS
17
FUSE RATINGS
The Magnum uses three fuses.
They should be replaced with the value and type detailed below:
Power PCB
F1 6.3AT
F2 3.15AT
Main Fuse (IEC inlet)
6.3AT
Two of these fuses are located internally and should not be
accessed without first disconnecting the power supply.
230V model
115V model
Hazer
Power PCB
F1 10AT
F2 3.15AT
Main Fuse (IEC inlet)
10AT
The DMX connections and Status LEDs are mounted on the panel below the
control panel. The following drawing shows the functions and connections.
LED FUNCTIONS
Power LED:
Fluid Cal LED
Temp Cal LED
Shows that the main power supply is operating.
: Not used on this model.
: Shows that the system is calibrating the temperature control
system.
Magnum Hazer
DMX LED
INOUT
1 GND
2 COLD
3 HOT
POWER
FLUID CAL
TEMP CAL
AVR PORT


Produkt Specifikationer

Mærke: Martin
Kategori: Effekt maskine
Model: Magnum Hazer

Har du brug for hjælp?

Hvis du har brug for hjælp til Martin Magnum Hazer stil et spørgsmål nedenfor, og andre brugere vil svare dig