Maruyama M27QC Manual

Maruyama Skæremaskine M27QC

Læs gratis den danske manual til Maruyama M27QC (76 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Maruyama M27QC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/76

T h e P O W E R i n O u t d o o r P o w e r

Completely read and understand this manual PRIOR to using this product.

Lea y entienda este manual a fondo, ANTES de usar este producto.

Lisez complèment et comprenez ce manuel AVANT d’utiliser ce produit.

Multi-Cutter

Power Unit/Grupo Motor/Bloc Moteur

M27QC/M30QC

OWNER'S/OPERATOR'S MANUAL

MANUAL DEL PROPIETARIO U OPERADOR

MANUEL DU PROPRIETAIRE/DE L'UTILISATEUR

— US-1 —

Limited Warranty Statement

All Maruyama commercial/ industrial products are warranted to the original purchaser to be free from defects

in material and workmanship for the time periods listed as follows:from the date of purchase

Lifetime for solid steel driveshaft and ignition coils.

5 years for qualified IRON 5-YR™ commercial, institutional, or industrial use.

1 year 2 years for residential or for commercial use with competitor’s oil.

90 days for rental use.

Engine - Refer to engine manufacturer’s warranty statement. Only Maruyama engines are

covered by this limited warranty statement.

Any part of a Maruyama product found to be defective within the applicable warranty period shall, at

Maruyama's option, be repaired or replaced without charge. Warranty consideration is obtained by delivering

any Maruyama product believed to be defective to an Authorized Maruyama Servicing Dealer within the

applicable warranty period.

The purchaser shall not be charged for diagnostic labor that leads to the determination that a warranted

part is defective, if the diagnostic work is performed at a Maruyama Dealer.

Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled

only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for the warranty

period. Any warranted part, which is scheduled for replacement as, required maintenance shall be warranted

for the period of time up to the first scheduled replacement point for that part. Maruyama Mfg. Co., Inc. is

liable for damages to other engine components caused by the failure of a warranted part still under warranty.

The purchaser is responsible for the performance of the required maintenance, as defined by Maruyama Mfg.

Co., Inc. in the Owner's/Operator's Manual.

EMISSION-RELATED PARTS WARRANTY: In addition to the above warranty coverage, Maruyama Mfg.

Co., Inc. will repair or replace, free of charge, for the original purchaser and each subsequent purchaser

any emission-related part or parts found to be defective in material and workmanship for two (2) years from

original retail delivery date. Emission-related parts are the carburetor assembly, the ignition coil

assembly, the ignition rotor, the spark plug, the catalytic converter and the fuel tank. Any replace-

ment part that is equivalent in performance and durability may be used in non-warranty maintenance or

repairs, and shall not reduce the warranty obligations of Maruyama Mfg. Co., Inc.

Produkt Specifikationer

Mærke:	Maruyama
Kategori:	Skæremaskine
Model:	M27QC

Har du brug for hjælp?

Hvis du har brug for hjælp til Maruyama M27QC stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skæremaskine Maruyama Manualer

Maruyama M270QC Manual

14 August 2024

Maruyama M42BK-QC Manual

14 August 2024

Maruyama M30QC Manual

14 August 2024

Maruyama BM240 Manual

14 August 2024

Maruyama M27QC Manual

14 August 2024

Maruyama MC-LB Manual

13 August 2024

Maruyama M300QC Manual

7 August 2024

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

GARDE 181DC1 Manual

17 Juni 2025

Vollrath 55457 Manual

16 Juni 2025

Nemco 55450-4 Manual

16 Juni 2025

GARDE 181CHEESE34 Manual

15 Juni 2025

Vollrath 15203 Manual

15 Juni 2025

GARDE 181CHKSLC14 Manual

15 Juni 2025

GARDE 181CHKSLC12 Manual

15 Juni 2025

Choice 407LETCUT12 Manual

15 Juni 2025

Vollrath 55459 Manual

15 Juni 2025

Choice 407CHEESECMB Manual

15 Juni 2025