Maruyama MX402 Manual

Maruyama Ikke kategoriseret MX402

Læs gratis den danske manual til Maruyama MX402 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Maruyama MX402, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

MAINTENANCE – MORE FREQUENT DAMAGES

842521 AN-8 NITRILE GASKET

842505 VALVE SPRING

842523 ELBOW

842524 MIXER VALVE

842525 1mm. DIAMETER NOZZLE

842526 CONIC NUT

842527 16x2 FLAT GASKET

842528 AN-5 NITRILE GASKET

842529 10mm DIAMETER CONE

842530 BLACK TUBE LANCE

842531 40mm X 1.50 m. STRAP

842532 HANDLE

842533 COVER SCREW

842534 CHAMBER COVER

842535 AN-30 NITRILE GASKET

842536 CHAMBER

842537 NECK SEAL

842538 VITON CHAMBER VALVE

842539 2-104 VITON GASKET

842540 NOZZLE NUT

842541 HOSE NUT

842542 HOSE BUSHING

842543 HANDLE BODY

842544 BUTTON

842545 BUTTON BOLT

842546 HANDLE CLIP

842547 HANDLE NUT

842548 HANDLE FILTER

842549 HANDLE SPRING

842550 SHUTTER

842551 2-121 NITRILE GASKET

842552 2-109 VITON GASKET

842553 2-107 VITON GASKET

842554 ELBOW WITH NOZZLE

842555 TUBE WITH NUTS

842556 COMPLETE CHAMBER

842557 SEALING VALVE

842558 COMPLETE HANDLE

842559 COMPLETE SHUTTER

842560 COMPLETE HOSE

842562 7 LITER TANK

842565 COMPLETE LANCE

842642 REPAIR KIT (842521, 842528,

842535, 842537, 842538, 842552,

842553)

101N

105

120

121

122

127

131

136N

138

141

151

156

157

158

159N

160

164

165V

168V

191

195

196

530

531

532

533

534

535

536

537

538

539

540

726

728

739

743

750

751

757

785

795

1415

MARUYAMA RESERVES THE RIGHT TO CHANGE PRODUCT SPECIFICATIONS

WITHOUT NOTICE.

PARTS LIST START-UP

Place strap on both sides of the bottle and follow the drawing. Fit the hose

(757) to the bottom of the tank and to the lance handle (750) rmly

adjusting the nuts (195). Place one end of the tube (728) on the handle

assembly (750) and the other end on the elbow assembly (726). Once the

tank is filled, screw in the chamber assembly (739) to the tank using the

grip (156). Pressurize by pumping 25 to 30 times with the pump handle

(156). In case that the maximum pressure is exceeded, the sealing valve

will activate (743) releasing excess pressure. To work, pump the handle

(750) and adjust the nozzle (122) rotating to one side or another to

achieve the desired atomization. During usage, pressure will diminish and

additional pumping will be required.

Clean the equipment and its liquid circuits, including the filter at the completion

of each working day. Cleaning should be done with clean water or as small

amount of household detergent to the tank.

NEVER LEAVE THE EQUIPMENT PRESSURIZED OR WITH CHEMICAL

IN THE TANK.

Avoid gaskets drying out or add some drops of oil (non edible) in the parts

indicated in the drawing. If the nozzle is obstructed, (122) clean it with a stream

of water or non metallic instruments taking care that the outlet hole is not

SAFETY STANDARDS AND HANDLING OF CHEMICAL SPRAY PRODUCTS

Storage. Place the product in an exclusive, ventilated and locked storeroom with key box, out of the

reach of children and pets. Store the product in its original packing. Use the same room to store mixing,

preparation and application utensils.

Product Preparation. Verify that that the product and treatment equipment are not expired and are in good

condition. Read and follow the instructions provided in the products labels and manuals. Use proper utensils

for mixing and preparing and mark them correctly. After preparation, wash your hands and face. Dispose

properly of empty packages and leftover products.

Treatment Procedure. Use suitable protective equipment. Avoid contact with the skin and eyes and, do not

eat, drink or smoke. Do not apply under windy conditions or against the wind. Avoid any product drifting into

adjacent land and crops. Avoid any drift into neighboring springs, rivers, streams, lakes, etc.

Cleanup After Use. Destroy empty packaging and bottles by burning or burying 1 ft/ 30 cm deep, away from

water (streams, wells). Clean all spray equipment thoroughly. Wash yourself and your clothes.

Advice in case of poisoning. Go to the doctor with the product label, or take the affected person to the

nearest hospital. Avoid use of home medicines and, in all cases wash the affected skin areas with plenty of

fresh water.

GENERAL PRECAUTIONS

Strictly follow recommendations and warnings on labels for products marked “dangerous” and

“poisonous. Comply with the application time and expiration date of each product. Avoid spraying in

extremely hot weather. Take precaution when spraying near electrical installations. Never use alkaline, acids,

flammable materials or those which may produce combustion processes. The sprayers are intended to be

used only with herbicides, insecticides and fungicides for plants. Do not expose them to the sunshine. These

sprayers must be safety tested at least annually by specialized personnel. At the time of manufacturing, the

manufacturer is aware of no harmful influences from the material of which the device is made. The sprayer

hose must be original equipment from the manufacturer. Do not substitute aftermarket components

Produkt Specifikationer

Mærke:	Maruyama
Kategori:	Ikke kategoriseret
Model:	MX402

Har du brug for hjælp?

Hvis du har brug for hjælp til Maruyama MX402 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Maruyama Manualer

Maruyama MM300 Manual

5 September 2024

Maruyama MD155DX Manual

5 September 2024

Maruyama MD3015 Manual

5 September 2024

Maruyama MD300 Manual

5 September 2024

Maruyama BSM201 Manual

5 September 2024

Maruyama MM181 Manual

14 August 2024

Maruyama MD830-1 Manual

14 August 2024

Maruyama BSA-500 Manual

14 August 2024

Maruyama MAG500RS Manual

14 August 2024

Maruyama PS30 Manual

14 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sunny A030.139.01 Manual

4 September 2025

OWI AMP-ER2TR64 Manual

4 September 2025

ARC AP6C1 Manual

4 September 2025

SWIT PC-P430 Manual

4 September 2025

ARC CKS70 Manual

4 September 2025

Wolfcraft 6902000 Manual

4 September 2025

OWI AMP-ER2TR62 Manual

4 September 2025

SWIT LC-D421 Manual

4 September 2025

ARC AP6C Manual

4 September 2025

XPower BR-18L Manual

4 September 2025