Master-Bilt MSF-43AN Manual

Master-Bilt Fryser MSF-43AN

Læs gratis den danske manual til Master-Bilt MSF-43AN (7 sider) i kategorien Fryser. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Master-Bilt MSF-43AN, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
5/16 Rev. A 57-02499
Installation & Operations Manual for
MSC-A & MSF-A Model
Display Freezers
5/16 Rev. A 57-02499
PLEASE READ HANDBOOK BEFORE USING EQUIPMENT
TRANSPORTATION AND INSTALLATION
1.
When transporting the freezer the angle between the compartment body and
the ground should be no more than 45° and you should never place the
freezer upside down.
2.
Do not use any of the external parts as loading points, for example, the
condenser on the back, the lids or the hinge.
3.
When the freezer is installed or used, all the packaging (including carton and
plastic wrap) should be removed.
4.
Keep the freezer stable to avoid vibration and noise.
5.
The freezer should be installed in a place with good ventilation and a space of at least 4” should be allowed
between the surrounding walls and the cabinet wall for air circulation.
6.
Unit should be placed far from any heating source and not in direct sunshine to avoid decrease of the
efficiency of refrigeration.
7.
Install the freezer in a dry place to prevent rust from forming on the compartment body, which may affect the
electrical insulation.
CAUTION
1.
The freezer must be grounded correctly, never with a heating pipe and coal gas pipe.
2.
In case of damage on the electrical cord and plug, please contact after-sale service and never do it yourself.
When pulling the plug out, please grasp by the plug, not the cord.
3.
If the voltage is unstable, please select a suitable automatic voltage regulator.
4.
Connect to the power to check the freezer before using, the freezer can be used until the
temperature decreases obviously after 30 minutes.
5.
You should adjust the temperature control according to the desired temperature, quantity of stored product
and the ambient temperature.
6.
Before loading product into the freezer please adjust the temperature control to the lowest point and allow unit
to run until the temperature decreases to -18°. Then load product and after 12 hours adjust the
temperature control to the normal point.
7.
Never put hot food into the freezer directly, only after it has been cooled to room temperature.
8.
Product should be loaded into the freezer in small quantities. Do not overfill the freezer or crowd it with product.
Large packages of meat should be divided into several smaller packages. There should be reasonable space
between the packages of product for better freezing.
9.
If the power cuts off, you should wait for at least 5 minutes before turning on the unit again to avoid damage to
the compressor.
10.
Never store any flammable, explosive or corrosive liquid or gas in the freezer and keep the unit away from
them.
11.
Beer, beverage, fresh flowers, medications or injections must never be put into the freezer.
12.
Please turn the temperature control to the lowest point if you want to store ice cream or similar frozen product.

Produkt Specifikationer

Mærke: Master-Bilt
Kategori: Fryser
Model: MSF-43AN

Har du brug for hjælp?

Hvis du har brug for hjælp til Master-Bilt MSF-43AN stil et spørgsmål nedenfor, og andre brugere vil svare dig


Fryser Master-Bilt Manualer

Master-Bilt

Master-Bilt DD-26 Manual

15 Juni 2025
Master-Bilt

Master-Bilt MSF-43AN Manual

14 Juni 2025
Master-Bilt

Master-Bilt DD-88LCG Manual

14 Juni 2025
Master-Bilt

Master-Bilt MSC-31AN Manual

14 Juni 2025
Master-Bilt

Master-Bilt MSC-31AA Manual

14 Juni 2025
Master-Bilt

Master-Bilt MSF-31AN Manual

14 Juni 2025
Master-Bilt

Master-Bilt MSC-66AA Manual

13 Juni 2025
Master-Bilt

Master-Bilt BEL-4-30SC Manual

21 August 2024
Master-Bilt

Master-Bilt BEL-3-30SC Manual

20 August 2024
Master-Bilt

Master-Bilt BEL-5-30SC Manual

20 August 2024

Fryser Manualer

Nyeste Fryser Manualer

Perfect Fry

Perfect Fry PFC500 Manual

15 Juni 2025
Gourmia

Gourmia GTF7690 Manual

15 Juni 2025
Gourmia

Gourmia GAF956 Manual

15 Juni 2025
Frymaster

Frymaster RE180D Manual

15 Juni 2025
Vollrath

Vollrath CF2-1800DUAL Manual

15 Juni 2025
Vulcan

Vulcan 4TR65AF Manual

15 Juni 2025
Vulcan

Vulcan 1TR85DF Manual

15 Juni 2025
Avantco

Avantco EF40 Manual

15 Juni 2025
Heinner

Heinner HAF-H9DB17 Manual

15 Juni 2025
True

True T-49FG-HC Manual

15 Juni 2025