2
GB
Introducing Your New Freezer
Before use
Please read these instructions carefully before using your new Matsui Freezer.
The Freezer is for indoor, domestic use only.
Basket
Only available for
MCF145WAE
Thermostat Control Dial
Drain Cap
Only available for MCF145WAE
Power Indicator
Foot
Side Cover
Power Cord with Plug
Hinge
Handle
Lid
Location
When selecting a position for your Freezer you should make sure the oor is at and rm, and the room is well venti-
lated with an average room temperature of between 10°C and 43°C. Avoid locating your Freezer near a heat source,
eg. cooker, boiler or radiator. Also avoid direct sunlight in lean-to’s or sun lounges. If you are placing your Freezer in an
out-building such as a garage or annex ensure that the Freezer is placed above the damp course, condensation will oc-
cur on the Freezer cabinet. This unit is not designed for use in garage or any outside installation. Never place the Freezer
in a wall recess or into tted cabinets or furniture. When your appliance is working, the condenser at the back (exposed
models) may become hot or alternatively the sides may become hot (hidden condenser models )
Moving the Freezer
The easiest way to move the Freezer is to tip it backwards just far enough to lift the front feet
o the ground and slowly move it into position.
Cleaning before use
Wipe the inside of the Freezer with a weak solution of bicarbonate soda. Then rinse with warm water using a ‘wrung-
out’ sponge or cloth. Wash the basket (Only available for MCF145WAE) and shelves in warm soapy water and dry com-
pletely before replacing in the Freezer. The external parts of the Freezer can be cleaned with wax polish. If you require
more information refer to Cleaning on page 5.
Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the Freezer. If not, please consult a quali-
ed person to correct.
Before switching on!
The freezer must be allowed to stand still with the lid open for at least 12 hours.
DO NOT SWITCH ON UNTIL TWELVE HOURS AFTER MOVING THE FREEZER.
The coolant uid needs time to settle.
MCF98_145WAE_IB_5L_120525_Zell.indb 2 25/05/2012 7:02 PM
