Maxview ANT4 Manual


Læs gratis den danske manual til Maxview ANT4 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Maxview ANT4, eller vil du spørge andre brugere om produktet?

Side 1/8
Installation Instructions
ANT4
UK contact:
Helpline: +44 (0)1553 811000
Email: support@maxview.co.uk
Web: www.maxview.co.uk
Maxview reserve the right to change specifications without prior notice
9111452 Iss 1
Maxview Address:
Maxview Ltd, Garage Lane, Setchey, King’s Lynn, Norfolk. PE33 0AT. UK
Contents
Product Contents
A. Omni-directional Roof Mount Antenna
and 0.8m cables with SMA connectors
B. Roof Clamp
Installation Instructions
4. Positioning your Antenna
4. Important Antenna Installation Information
5. Fitting the Antenna
Additional Information
7. General Safety Warnings
7. Terms and Conditions
7. Maintenance
8. 2 Year Guarantee
8. Certification and Environment
Introduction
Thank you for purchasing this product, should you have any difficulty using your
Antenna please contact our friendly Customer Helpline on +44 (0)1553 811000 or
email support@maxview.co.uk.
Tools required
- Power Drill
- 2.5mm Drill Bit
D
- Hack Saw
- File/Emery Paper
- Surface Cleaner- 25mm Hole Saw
- Cross Head Screwdriver
C. No. 6 Screws (spares included)
D. Fixing Template
E. SMA to TS9 Adaptor X 4
A
B
C
2
Antenna
Type: Omni-directional 4x4 MIMO (multiple in multiple out)
Frequency/Gain: 698-6000 MHz/5.9dBi-8.8dBi. Includes all 3G, 4G and 5G frequencies
Connector Type: 4 x SMA
Impedance: 50 Ohm
Power: Passive
Cable Lengths: 0.8m as standard
Housing: Aluminium Base. UV Stable ASA Cover
Dimensions: ø: 196mm x H: 65mm
Weight: 550g
Specifications
E


Produkt Specifikationer

Mærke: Maxview
Kategori: Ikke kategoriseret
Model: ANT4

Har du brug for hjælp?

Hvis du har brug for hjælp til Maxview ANT4 stil et spørgsmål nedenfor, og andre brugere vil svare dig