Maxxus HRM 5.1 Manual

Maxxus Pulsmåler HRM 5.1

Læs gratis den danske manual til Maxxus HRM 5.1 (2 sider) i kategorien Pulsmåler. Denne vejledning er vurderet som hjælpsom af 64 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 32.5 anmeldelser. Har du et spørgsmål om Maxxus HRM 5.1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
2
1
3
4
L R
2 3 4 5 6 7
USER MANUAL
HRM 5.1
Version 1.1
Thank you for purchasing this product. This is a transmit-
ter-type heart rate monitor that detects stores and sends
heart rate data to a compatible smartphone, ANT+ or a
compatible 5,3kHz receiver..
IMPORTANT: This product is for sports purposes only and it is
not meant to replace any medical advice. (Patients with cardiac
pacing or other implant devices should consult their doctors for
recommendations)
This manual contains important safety and care informa-
tion and provides step-by-step instructions for using this
product. Please read it thoroughly, and keep it in a safe
place for later reference.
DEVICE OVERVIEW
A. Heart Rate Monitor
a. Front View
b. Rear View
1. Left and right wearing directions
2. Battery cover
B Adjustable Elastic Chest Belt
Rear view
Front view
3 Electrodes
4 Fastening buttons
Important note: When the device is not worn, it will automatically
go into shutdown sleep mode and stop the wireless connection.
When the heart rate belt is worn again correctly, it will start
automatically.
A. Contents
In this box, you will nd:
a. Heart rate monitor
b. Adjustable elastic belt
c. CR2032 battery – already installed
d. User manual
B. Putting on the Chest Belt
a. Wet the conductive pads on the rear of the chest belt with a few
drops of water, saliva, or conductive gel to ensure solid contact. If you
have very dry skin this is particularly necessary to avoid inaccurate
measurement.
b. Place the heart rate chest belt across your chest so that the
monitor sits centrally between your chest muscles. Adjust the belt so
that it ts rmly but comfortably against your body. If the chest belt
is too loose it could lead to incorrect heart rate data, particularly with
intensive exercise.
c. Attach the monitor to the press studs on the front of the chest
belt. Make sure that the monitor is the correct way around with the
right press stud to your right and the left press stud to your left.
WARNING
Inaccurate heart rate data will be detected if the device is worn
the wrong way around.
WARNING
a. Do not wash the transmitter or belt in a washing machine or
dry it in a dryer. This is strictly prohibited.
b. Before hand washing the device, detach the transmitter
with the electrodes from the heart rate monitor. This part is not
washable.
c. While washing the belt, make sure the water is not more than
30°C.
OPEN CLOSE
OPEN
LEFT RIGHT
ÖFFNEN SCHLIESSEN
ÖFFNEN
LINKS RECHTS
8 9 10 11 12 13 14
BATTERIES
The transmitter uses one 3V battery type CR2032. A battery is already
installed. The battery typically lasts for one year.
Replacing the Battery
A. Using a coin, twist the battery cover clockwise until you hear it
click out of place.
B. Remove the old battery and insert the new battery with the +side
upwards.
C. Replace the battery cover by twisting it clockwise until it is rmly
in place.
IMPORTANT
1. Keep batteries and small articles away from children. If a
battery has been swallowed seek immediate medical advice.
2. The batteries supplied must not be recharged, reactivated by
any other means, dismantled, put into a re, or short-circuited.
CAUTION:
Always use the correct battery type. If you use the wrong type of
battery it may damage the device.
Battery Regulations / Disposal of Used Batteries
As a distributer of battery and rechargeable battery requiring
devices, we are obligated by law to inform you of the regulations
and obligations which currently apply:
Used batteries may not be disposed of in household waste.
Consumers are legally obliged to take used batteries to a
suitable collection point a local retailer or local authority. You can
use this service free of charge. Alternatively, you can return your
used batteries to one of our stores. If you wish to return them by
post, they must be stamped with sufcient postage.
Used batteries may contain pollutants or heavy metals that can
be harmful to the environment and health. In addition, batteries
contain valuable raw materials which can be recycled.
The symbols shown on the batteries have the following meaning:
= the batteries may not be disposed of in household waste.
Please follow the next steps to create a wireless connection to your
smartphone.
Step 1.
Go to device settings->general->bluetooth.
Step 2.
Turn on Bluetooth. Do not look for the transmitter to pair. The Blue-
tooth smart device will pair automatically with an application.
Step 3.
Select a compatible tness application from the”app store” and
download it to your phone. Choose a tness application. For example,
MooFit, Wahoo tness, Endomondo, Runtastics, Strava
Pair the Bluetooth heart rate transmitter with the fitness application
in the application settings.
The Bluetooth identifier of the transmitter starts with "HRM5....".
Note:
If the chest belt cannot pair with some applications, it might be due
to certain limits of the chest belt, please confirm with the application
makers.
ANT+
Step 1.
Wear the BLE & ANT+ & 5.3KHz chest belt as instructed.
Step 2.
Make sure the 5.3KHz sports watch is within 0.5m distance.
Step 3.
When you see the heart rate data this means a successful connec-
tion.
Note:
Some applications have an ANT+ connection but cannot be used.
Those smartphones with built-in ANT+ accessories may work or
you may need to have an ANT+ dongle to use it. If you want to
know whether your phone is compatible please check the phone
specication.
5.3KHz
Step 1.
Wear the BLE & ANT+ & 5.3KHz chest belt as instructed
Step 2.
Make sure the ANT+ sports watch is within 10m distance.
Step 3.
When you see the heart rate data this means a successful connec-
tion.
Note:
Every Bluetooth smart device has settings and operating methods
of how to pair with the chest belt, please refer to the device’s user
manual.
Bluetooth Smart and ANT+ and 5.3KHz can be used simultaneously.
There is no interference problem.
STORAGE
*When the device starts to work, it will record the heart rate every 2
seconds
*If the workout time does not exceed 2 minutes, the stored data
will be discarded
*The stored heart rate data can only be transmitted via Bluetooth.
Please download the app.
*Every time the device starts to work, it will try to connect to the
downloaded app to transmit the stored data.
*This device has a total of 13 hours of memory for heart rate data
storage. When the storage is full, the oldest training data will be
overwritten.
SUPPORTED DEVICES
A.
This device is a 3-in-1 wireless device. It supports both ANT+, 5.3KHz,
and is also BLE compatible and functions with many smartphones
and GPS watches, including:
– iOS devices: ios9.0 or higher
– Android devices: Android 4.3 or higher
– Garmin Forerunner 110
– Non-coded 5.3KHz watch
B.
In addition, this device is also recommended for use with the
following apps:
– Runtastic Pro
– Sports Tracker
– Endomondo
– Wahoo Fitness
– Under Armour-Record
* All brand names and trademarks are properties of their respective
owners.
Distributors
MAXXUS Group GmbH & Co. KG
Nordring 80, D-64251 Groß-Gerau, Germany
E-Mail: info@maxxus.de
www.maxxus.com

Produkt Specifikationer

Mærke: Maxxus
Kategori: Pulsmåler
Model: HRM 5.1

Har du brug for hjælp?

Hvis du har brug for hjælp til Maxxus HRM 5.1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Pulsmåler Maxxus Manualer

Maxxus

Maxxus HRM 5.1 Manual

6 August 2024
Maxxus

Maxxus HRM 3.1 Manual

24 Juli 2024

Pulsmåler Manualer

Nyeste Pulsmåler Manualer

Teesa

Teesa TSA8071 Manual

6 Juni 2025
Crane

Crane AF5-CDBT-5 Manual

4 Marts 2025
Ranex

Ranex F18 Manual

11 Januar 2025
Garmin

Garmin HRM-DUAL Manual

6 Oktober 2024
Medel

Medel Clip & Go Manual

27 September 2024
Bowflex

Bowflex Heart Rate Armband Manual

23 September 2024
Polar

Polar A1 Manual

16 September 2024
Polar

Polar H6 Manual

3 September 2024
Rossmax

Rossmax SB220 Manual

1 September 2024
Polar

Polar CS Cadence sensor W.I.N.D. Manual

1 September 2024