Maytag Maxima MHW6000XR Manual

Maytag Vaskemaskine Maxima MHW6000XR

Læs nedenfor 📖 manual på dansk for Maytag Maxima MHW6000XR (48 sider) i kategorien Vaskemaskine. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/48
W10254445A
W10254446A - SP
If you have any problems or questions, visit us at www.maytag.com
Pour tout problème ou question, consulter www.maytag.ca
Designed to use only HE
High Efciency detergents.
Conçue pour l’utilisation
d’un détergent haute
efcacité seulement.
Certied to Sanitize and to Reduce Allergens
Homologué pour assainir et pour réduire la présence
d’allergènes
Use & Care Guide
Guide d’utilisation et d’entretien
Para obtener acceso
al Manual de uso y cuidado
en español, o para obtener
información adicional acerca
de su producto, visite:
www.maytag.com
FRONT-LOADING AUTOMATIC WASHER
LAVEUSE AUTOMATIQUE À CHARGEMENT FRONTAL
2
WASHER SAFETY
FRONT-LOADING AUTOMATIC WASHER
TABLE OF CONTENTS
LAVEUSE AUTOMATIQUE
À CHARGEMENT FRONTAL
TABLE DES MATIèRES
WASHER SAFETY ....................................................................2
ACCESSORIES ........................................................................3
CONTROL PANEL AND FEATURES .........................................4
CYCLE GUIDE ..........................................................................6
USING YOUR WASHER ...........................................................8
CYCLE STATUS LIGHTS ........................................................12
WASHER MAINTENANCE ......................................................13
TROUBLESHOOTING ............................................................16
WARRANTY ............................................................................22
ASSISTANCE OR SERVICE ..................................... Back Cover
SÉCURITÉ DE LA LAVEUSE ..................................................23
TABLEAU DE COMMANDE ET CARACTÉRISTIQUES ..........24
GUIDE DES PROGRAMMES ..................................................26
UTILISATION DE LA LAVEUSE ...............................................29
TÉMOINS LUMINEUX DE PROGRAMME ..............................34
ENTRETIEN DE LA LAVEUSE ................................................35
DÉPANNAGE ..........................................................................38
ACCESSOIRES ......................................................................45
GARANTIE ..............................................................................46
ASSISTANCE OU SERVICE ...........................Couverture arrière
3
ACCESSORIES
Customize your new washer and dryer with the following
genuine Maytag accessories. For more information on options
and ordering, contact your dealer, or visit: www.maytag.com.
15" Pedestal
Color-matched pedestals raise
the washer and dryer to a more
comfortable working height.
The large drawer provides
convenient storage.
Stack Kit
If space is at a premium,
the stack kit allows the dryer
to be installed on top of
the washer.
Worksurface
The worksurface bridges
the washer and dryer, and
provides a convenient working
and storage area.
4
power
cancel
start
pause
press and
hold to start
press a hold nd
for 3 s dsecon
st r sta seam fo in
press & hold f or
d m ghtru li
fresh hold
wh esit
heavy duty
delicate
r n ins draie/
& spin
small
load
with
clean
washer
bedding
wrinkle control
nallerge
no alrm
soak
+
-
temp level soil le l spin speedve
extra
rinse
oxi
boost
max
extract
cycle
si algn
con oltr
lock
CONTROL PANEL AND FEATURES
98
Not all features and cycles are available on all models.
Steam models
Non-Steam models
POWER/CANCEL BUTTON
Press to turn the washer on and off.
Press to stop/cancel a cycle at any time.
WASH CYCLE KNOB
Turn the Wash Cycle Knob to select a cycle for your laundry
load. See “Cycle Guide” for detailed descriptions of cycles
that best suit your load.
START/PAUSE BUTTON
Press and hold to start a cycle, or press once while a cycle
is in process to pause it for up to 5 minutes.
DELAY START + and - BUTTONS
Use these buttons to delay the start of the wash cycle
by up to 10 hours on models with Steam, and 8 hours
on non-Steam models.
1
2
3
4
21
A
D
A HE detergent
B Liquid fabric softener
C Liquid Chlorine bleach
D Oxi Boost
10 C
B
B
A
A HE detergent
B Liquid fabric softener
C Liquid chlorine bleach
10 C
345
6
power
cancel
start
pause
press and
hold star tto
press a hold nd
for 3 se scond
wh esit
heavy duty
r n ins draie/
& spin
small
load
with
clean
washer
wrinkle lcontro
no alrm
soak
allergen
delicate
+
-
temp level soil le l spin speedve
extra
rinse
cycle
si algn
con oltr
lock
st n ai
clean
fresh
hold
21 345
6
7
9
5
5
6
7
8
LED DISPLAY AND SETTINGS BUTTONS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed. Factors
such as load size, wash temperature, and water pressure
may affect the time shown in the display. Overloading,
unbalanced loads, or excessive suds may cause the washer
to adjust the cycle time, as well.
Use the buttons along the bottom of the display to adjust
settings. See “Cycle Guide” for available settings on each
cycle. Not all settings are available with all cycles.
Temp Level
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based
on the type of fabric and soils being washed. For best
results, use the warmest wash water safe for your
fabric, following the garment label instructions. All wash
temperatures feature a cold rinse, except Warm*, which
has a warm wash and a warm rinse.
Soil Level
Soil level (wash time) is preset for each wash cycle. As you
press the Soil Level button, the cycle time will increase or
decrease in the Estimated Time Remaining display.
For most loads, use the soil level that is preset with the
cycle you have chosen. For heavily soiled and sturdy
fabrics, press Soil Level to select more wash time. For
lightly soiled and delicate fabrics, press Soil Level to
select less wash time. Lower soil level settings will help
reduce tangling and wrinkling.
Spin Speed
This washer automatically selects the spin speed based
on the cycle selected. Preset speeds can be changed.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds reduce wrinkling, but will leave
your load more damp.
Cycle Status Lights
The indicator bar along the right side of the display will
let you know what stage of the wash cycle is in process,
as well as when the door is locked or if you can still add
an item. For more information on each stage, see “Cycle
Status Lights”.
OPTION BUTTONS
Use these buttons to activate additional wash options
or additional features on the washer. Not all options are
available on all models or all cycles. See the “Cycle Guide”
for information on which cycles include which options.
Extra Rinse
Activate this option to add an extra rinse to most cycles.
NOTE: Some cycles include this feature as a default. See
“Cycle Guide” for details.
Oxi Boost (on some models)
Turn this option on when using Oxi boost products in the
dispenser to ensure they are dispensed at the optimal
time in the cycle.
Max Extract (on some models)
Press to activate the MaxExtract uses an extended to
remove additional water during the spin. This helps
reduce drying times.
Stain Clean (on some models)
The Stain Clean option adds additional soak and wash
time to many cycles to help remove tough stains.
An integrated heater helps to maintain optimal wash
temperatures.
Cycle Signal
Use this option to adjust volume of the signal that sounds
at end of cycle.
NOTE: You may also turn off the tones that sound when a
button is pressed. Press and hold the Cycle Signal button
for about one second to turn button sounds on or off.
Control Lock
Press and hold for 3 seconds to lock the controls to
avoid unwanted changes or operation. Press and
hold 3 seconds again to unlock. The indicator will light
to show when controls are locked. You may still press
START/PAUSE to pause the cycle, or press the POWER/
CANCEL button to turn the washer off.
DRUM LIGHT (Steam models only)
Steam models feature an LED drum light. Press and hold
Steam for Stains to turn the LED drum light on or off. The
light will also turn on when the door is open, and turn off
automatically after about 5 minutes.
STEAM FOR STAINS (Steam models only)
The Steam for Stains option adds additional soak and
wash time to many cycles to help remove tough stains.
An integrated heater helps to maintain optimal wash
temperatures. Steam for Stains includes a Steam boost for
added cleaning power. See the “Cycle Guide” for cycles that
allow the Steam for Stains option.
FRESH HOLD™ OPTION
With the washer on, press to activate the Fresh Hold™
option. This will periodically tumble the load after the end
of the cycle for up to 16 hours while the integrated fan
circulates air through the washer to reduce humidity. You
may also activate the Fresh Hold option without running a
cycle by pressing and holding for 3 seconds, then pressing
START/PAUSE.
NOTES:
• The door will lock while the Fresh Hold option is active.
Press the POWER/CANCEL button to stop the cycle and
unlock the door.
• Fresh Hold is not available if the spin speed is set to
No Spin.
DISPENSER DRAWER
The dispenser drawer gives you the convenience of
automatically adding HE detergent, liquid chlorine bleach,
and liquid fabric softener to the wash load at the proper
time. Steam models also feature an Oxi /color-safe bleach
compartment. See “Using the Dispenser” for information on
using the dispenser drawer.
9
High Efciency “HE” detergent compartment
This compartment holds liquid or powdered HE
detergent for your main wash cycle.
For models without an Oxi dispenser compartment,
liquid or powdered color-safe bleach or Oxi
booster product may be added to the HE detergent
compartment along with the same type of detergent,
liquid or powdered.
Liquid fabric softener compartment
Automatically dilutes and dispenses liquid fabric
softener at the optimal time in the cycle.
NOTE: Use only liquid fabric softener in this dispenser.
Liquid chlorine bleach compartment
Automatically dilutes and dispenses liquid chlorine
bleach at the optimal time during the rst rinse after the
wash cycle. This compartment cannot dilute powdered
bleach.
Oxi Boost compartment (Steam models only)
This compartment holds measured liquid or powdered
Oxi booster product and dispenses it at the proper time
in the cycle. See the “Cycle Guide” for cycles that offer
the Oxi Boost option.
B
C
A
D
10
6
CYCLE GUIDE — STANDARD CYCLES
Normally soiled cottons, Normal Hot Extra Heavy Extra Rinse This cycle combines medium-speed High
linens, sheets, and Warm Medium Heavy Stain Clean1 tumbling and a high-speed spin.
mixed garment loads Cold No Spin Max Extract This cycle is designed to provide Normal
Light Oxi Boost the most energy efciency.
Fresh Hold
Delay Start
Sturdy colorfast Heavy Sanitize† High Extra Heavy Extra Rinse High-speed tumbling and a
fabrics and heavily Duty Medium Stain CleanHot Heavy 1 high-speed nal spin help
soiled garments, Warm* Low Normal Max Extract provide optimal cleaning and
towels, and jeans Warm No Spin Light Oxi Boost reduce drying times.
Cold Fresh Hold
Delay Start
Heavily soiled white Whites Sanitize† High Extra RinseExtra Heavy Hot wash temperatures ensure
fabrics and garments Medium Heavy Stain CleanHot 1 liquid chlorine bleach action.
Warm* Low Max Extract An Extra Rinse helps remove Normal
Warm No Spin Light Oxi Boost any bleach residue in clothes.
Cold Fresh Hold
Delay Start
Heavily soiled Power Wash Sanitize† High Extra Heavy Extra Rinse Features an extended wash time
durable fabrics, Medium Heavy Hot Stain Clean1 to help remove tough stains.
overalls, coveralls, Warm* Low Normal Max Extract Stain Clean/Steam for Stains
sweatshirts, pants, and Warm No Spin Light Oxi Boost (depending on model) is
outdoor garments Cold Fresh Hold automatically added for extra
Delay Start cleaning power.
Lightly-soiled shirts, Wrinkle Hot Medium Extra Heavy Extra Rinse This cycle combines low-speed
blouses, trousers, Control Warm Low Heavy Stain Clean1 tumbling and low-speed spin
pants and dresses Cold Extra Low Max Extract for gentle fabric care and reduced Normal
No Spin Light Oxi Boost wrinkling
Fresh Hold
Delay Start
Blankets, comforters Bedding Sanitize† High Extra Heavy Extra Rinse Uses an initial soak to completely
Hot Stain Clean Medium Heavy 1 saturate the load, followed by
Warm* Low Normal Oxi Boost medium wash speeds and a
Warm Extra Low Light Fresh Hold medium-speed spin to maintain
Cold No Spin Delay Start load balance.
Sturdy garments and Allergen†† Sanitize† High Extra Heavy Extra Rinse Uses more water to ush out
household items Medium Heavy Stain CleanHot 1 allergens such as dust mites
exposed to possible Normal Max Extract and pet dander from
allergens Light Oxi Boost normally-soiled items.
Fresh Hold
Delay Start
Sheer fabrics, Delicate Warm* High Extra Rinse This cycle combines low-speed Normal
lingerie, sweaters, Warm Medium Light Fresh Hold tumbling and low-speed spin
and silks Cold Delay Start for gentle fabric care and reduced Low
Extra Low wrinkling.
No Spin
Items to wash
using default
cycle settings:
Cycle: Wash
Temperature*:
Spin
Speed:
Soil
Level:
Available
Options:
Cycle Details:
†† Allergen
Allergen cycle certied by NSF International, an independent, third party testing and certication organization.
The certication veried that this cycle reduced tested allergens by at least 95.0% and maintained the water
temperature necessary to kill dust mites. Only the allergen cycle has been designed to meet the requirements of
NSF Protocol P351 for Allergen Reduction Performance effectiveness.
† Sanitize
Cycles certied by NSF International, an independent, third party testing and certication organization are those with the
sanitize temperature selection available. The certication veried that these cycles reduce 99.9% of bacteria typically
found on clothing, bedding, and towels. There is no carryover of bacteria between loads after the cycle is complete.
Only cycles with sanitize wash temperature selected have been designed to meet the requirements of NSF Protocol
P172 for Sanitizing Effectiveness.
Settings and options shown in are default settings for that cycle. For best fabric care, choose the cycle that best ts the bold
load being washed.
Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
* All temperature selections feature a Cold rinse, except Warm/Warm, which features a warm wash and a warm rinse.
1 Stain Clean on non-Steam models. Steam for Stains on Steam models. See “Control Panel and Features” for additional information.
7
Small loads of 2 - 3 Small Load Hot Heavy Extra Rinse For small loads (3-4 items) needed High
lightly soiled garments Warm NormalMedium Fresh Hold quickly. This cycle combines
Cold Low Light Delay Start high-speed tumbling, a shortened
Extra Low wash time, and a high-speed spin
for reduced drying times.
Swimwear, items Rinse Warm* N/A This cycle adds water, then uses /Drain High Extra Rinse
that need rinsing only & Spin Warm Medium Max Extract high-speed tumbling and an extra
Low Fresh Hold high-speed spin. For some fabrics, Cold
Extra Low Delay Start you may wish to set the spin speed
No Spin to a lower setting.
Wet load of clothes Drain N/A N/A Max Extract Use Drain & Spin to remove excess Rinse/ High
& Spin Medium Fresh Hold water from the load by choosing
Low Delay Start Rinse/Drain & Spin and turning off
Extra Low Extra Rinse. Spin speed can be set
No Spin to a lower setting.
Heavily soiled garments Soak Warm* Extra Heavy Fresh Hold Provides an extended soak without
Warm Heavy Delay Start a nal spin to help loosen tough
Cold stains prior to a wash cycle. Normal
Light
No clothes in washer Clean Washer Use monthly with Affresh® to clean
with Affresh® the interior of the washer. Make
sure no clothes are in washer. The
Clean Washer light will ash every
30 loads to remind you to run the
Clean Washer cycle.
CYCLE GUIDE — SPECIAL-PURPOSE CYCLES
Cycle: Wash
Temperature*:
Spin
Speed:
Soil
Level:
Available
Options:
Cycle Details:
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Small load: Fill the washer drum with 3-4 items, not more than 1/4 full.
Medium load: Fill the washer drum up to about 1/2 full.
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.
For best results, avoid packing tightly.
* All temperature selections feature a Cold rinse, except Warm/Warm, which features a warm wash and a warm rinse.
Settings and options shown in are default settings for that cycle. For best fabric care, choose the cycle that best ts the bold
load being washed.
Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
Items to wash
using default
cycle settings:
8
USING YOUR WASHER
Sort items by recommended cycle, water temperature, and
colorfastness. Separate heavily soiled items from lightly soiled.
Separate delicate items from sturdy fabrics. Treat stains
promptly and check for colorfastness by testing stain remover
products on an inside seam.
1. Sort and prepare your laundry
Open the washer door. Place a load of sorted clothes loosely in
the washer. Items need to move freely for best cleaning and to
reduce wrinkling and tangling. Close the washer door by pushing
it rmly until the latch clicks.
n Depending on load type and cycle, the washer can be fully
loaded, but not tightly packed. Washer door should close
easily. See “Cycle Guide” for loading suggestions.
n Mix large and small items and avoid washing single items.
Load evenly.
n Wash small items in mesh garment bags. For multiple items,
use more than one bag and ll bags equally.
2. Load laundry into washer
First wash cycle without laundry
Before washing clothes for the rst time, if not completed during
the nal installation step, choose the QUICK WASH cycle and
run it without clothes. Use only HE detergent. Use 1/2 the
manufacturer’s recommended amount for a medium-size load.
This initial cycle serves to ensure the interior is clean before
washing clothes.
Choosing the Right Detergent
Use only High Efciency detergents. The package will be
marked “HE” or “High Efciency.” Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using regular
detergent will likely result in longer cycle times and reduced
rinsing performance. It may also result in component failure and,
over time, build-up of mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
Use only High Efciency (HE) detergent.
IMPORTANT:
n Empty pockets. Loose change, buttons, or any small object
can plug pumps and may require a service call.
n Close zippers, fasten hooks, tie strings and sashes, and
remove non-washable trim and ornaments.
n Mend rips and tears to avoid further damage to items
during washing.
n Turn knits inside out to prevent pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics will
pick up lint from towels, rugs, and chenille fabrics.
n Do not dry garments if stains remain after washing, because
heat can set stains into fabric.
n Always read and follow fabric care labels and laundry
product instructions. Improper usage may cause damage
to your garments.
9
Using the Dispenser
Pour a measured amount of HE
detergent into detergent compartment.
For powdered detergent, slide the
selector to the left. For liquid detergent,
slide the selector to the right.
Do not overll; adding too much
detergent may cause detergent to be
dispensed into the washer too early.
3. Add HE detergent to dispenser
Use only High Efciency
(HE) detergent.
Powdered detergent:
Slide the selector to the left.
Liquid detergent:
Slide the selector to the right.
Pour a measured amount of HE
detergent into detergent compartment.
For powdered detergent, slide the
selector to the left. For liquid detergent,
slide the selector to the right.
Do not overll; adding too much
detergent may cause detergent to be
dispensed into the washer too early.
Use only High Efciency
(HE) detergent.
Powdered detergent:
Slide the selector to the left.
Liquid detergent:
Slide the selector to the right.
Models with a 4-compartment dispenser Models with a 3-compartment dispenser
If you would like to use powdered or liquid oxi-type
boosters or color-safe bleach, follow the manufacturer’s
recommendations for placement. If no recommendation
is available, you may add powdered or liquid oxi-type
boosters or color-safe bleach to the detergent
compartment with the same type of detergent,
powdered or liquid.
IMPORTANT: Use powdered detergent when using
the Delay Wash option. Liquid detergent may seep out
before the wash begins.
HE detergent
compartment
HE detergent
compartment
To use the dispenser drawer:
1. Open the dispenser drawer.
2. Add laundry products as described in steps 3–6.
3. Slowly close the dispenser drawer. Make sure it is
completely closed.
NOTE: A small amount of water may remain in the dispensers
from the previous wash cycle. This is normal.
IMPORTANT: Use powdered detergent when using the
Delay Wash option. Liquid detergent may seep out before
the wash begins.
10
Add a measured amount of liquid chlorine bleach to the bleach
compartment. Do not overll, dilute, or use more than 2/3 cup
(165 mL). Use a measuring cup with a pour spout; do not guess.
n Do not ll beyond the “MAX” level. Overlling will cause bleach
to dispense too soon and may cause garment damage.
n Do not add color-safe bleach or oxi-product to this dispenser.
5. Add liquid chlorine bleach
to dispenser (if desired)
power
canc el
7. Press POWER/CANCEL to turn
on washer
Pour a measured amount of liquid fabric softener into liquid
fabric softener compartment. Always follow manufacturer’s
directions for correct amount of fabric softener based on your
load size.
Fabric softener is always dispensed in the last rinse, even if
Extra Rinse is selected.
IMPORTANT: Do not overll, dilute, or use more than 1/4 cup
(60 mL) of fabric softener. Do not ll past the MAX line.
Overlling dispenser will cause fabric softener to immediately
dispense into washer.
n Do not spill or drip any fabric softener onto the clothes.
n Do not use liquid fabric softener dispenser balls in this
washer. They will not dispense correctly.
4. Add fabric softener to dispenser
(if desired)
Liquid fabric
softener
compartment
On models with a 4-compartment dispenser,
add Oxi booster or color safe bleach to the
Oxi compartment. Be sure to select the
Oxi Boost option.
n Always follow the manufacturer’s recommendations.
For models without an Oxi compartment:
If you would like to use powdered or liquid oxi-type boosters or
color-safe bleach, follow the manufacturer’s recommendations
for placement. If no recommendation is available, you may add
powdered or liquid oxi-type boosters or color-safe bleach to
the detergent compartment with the same type of detergent,
powdered or liquid.
6. Add Oxi or color safe bleach
(on some models)
Oxi / color safe bleach
compartment
Four compartment dispenser shown Four compartment dispenser shown
oxi
boost
Slowly close the dispenser drawer. Make sure the drawer is
closed completely, then press and hold POWER/CANCEL to turn
on the washer.
Liquid chlorine
bleach
compartment
Four compartment dispenser shown
11
wh esit
heavy duty
delicate
r ins draine/
& spin
small
load
with
clean
washer
bedding
wrinkle control
allergen
normal
soak
8. Select CYCLE
The display will show the default settings for the selected
cycle. If desired, press the button beneath each setting to
adjust the Temp Level, Soil Level, and Spin Speed. Adjusting
the Soil Level will change the Estimated Time Remaining.
Overloading, unbalanced loads, or excessive suds may also
cause the washer to increase the cycle time.
NOTE: Not all settings are available on all cycles. See “Cycle
Guide” for available settings.
Turn cycle knob to select your wash cycle. See “Cycle Guide”
for details on cycle features. Not all options and settings are
available on all cycles.
p ress and hold
for 3 se scond
+
-
temp le l soil leve vel spin speed
extra
rinse
oxi
boost
max
extract
cycle
signal
control
lock
9. Adjust settings, if desired
press and hold
for 3 se scond
st r st seam fo ain
press & hold for
drum light
fresh hold
extra
rinse
oxi
boost
max
extract
c eycl
si algn
control
lock
10. Select any additional options
start
pause
press and
hold to start
12. Press and hold START/PAUSE
to begin wash cycle
To add additional options to the cycle, such as Extra Rinse,
Fresh Hold, Stain Clean/Steam for Stains (on some models), or
Max Extract (on some models), press the button for the desired
options to add them to the selected cycle.
NOTE: Not all options are available with all cycles. See “Cycle
Guide” for available options.
Press and hold the START/PAUSE button to start the wash
cycle. To pause a cycle in progress, press the START/PAUSE
button once, then press and hold again to continue the cycle.
To cancel a cycle, press the POWER/CANCEL button.
Once you press and hold START/PAUSE, you will hear the
door lock, unlock, and lock again. The washer door will remain
locked during the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2 missed garments,
you may do so while the “Add a Garment” light is lit.
Press START/PAUSE once; the door will unlock
once the washer movement has stopped.
This may take several minutes. Then close
door and press START/PAUSE again to restart
the cycle.
11. Setting a delayed start
If you do not want to begin a cycle immediately, you may
choose the DELAY START option. This will delay the start
of the wash cycle by up to 10 hours on models with Steam,
and 8 hours on non-Steam models.
To set a delayed Start:
1. Press DELAY START and buttons to set the desired s t
delay time.
2. Press START/PAUSE to set the delay. The delay countdown
has started when the START/PAUSE light stops blinking.
+
-
temp le l soil leve ve
start
pause
press and
hold to start
Steam model shown
Steam model shown
Steam model shown
12
Cycle Status Lights
The Cycle Status Lights show the progress of a cycle. At each
stage of the process, you may notice sounds or pauses that are
different from traditional washers.
Door Locked
Door Locked will light to indicate that the door is locked and
cannot be opened without rst pausing or canceling the cycle.
Sensing
When the START/PAUSE button is pressed, the washer will
rst perform a self-test on the door lock mechanism. You will
hear a click, the drum will make a partial turn, and the door
will unlock briey before locking again.
Once the door has locked the second time, the washer will
begin tumbling and adding water. This sensing process will
continue until the correct amount of water has been added
for the load. You may also hear water owing through the
dispenser, adding detergent to the load.
The displayed time may change as the washer goes through
the sensing process. This is normal.
Add a Garment
When Add a Garment is lit, you may pause the washer, open
the door, and add items.
Sanitized
Sanitized will light on cycles with a Sanitize setting once the
load has been washed at the proper temperature for the
necessary time to meet NSF Sanitization requirements.
Delay
The Delay indicator will light if a Delay Start has been set.
Once the programmed delay has ended, the indicator will
turn off and the cycle will begin.
Wash
This is the main portion of the wash cycle. You will see the
washer tumble the load. The motor sounds may change at
different stages in the cycle. The wash time is determined by
the selected cycle and soil level along with your load size.
Rinse
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. If used, liquid chlorine
bleach is added in the rst rinse. Fabric Softener is added
in the last rinse.
Spin
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle
and spin speed.
Steam (on some models)
This will light to show that the cycle is using a Steam boost
for added cleaning power.
Done
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
Fresh Hold™
The Fresh Hold™ indicator will light when the Fresh
Hold™ option is active. During this time, the washer
will occasionally tumble the load while a fan circulates
fresh air through the washer.
Steam model shown
+
-
temp le l soil leve vel spin speed
14
CLEANING THE DOOR SEAL
1. Open the washer door and remove any clothing or items
from the washer.
2. Inspect the gray colored seal between the door opening
and the basket for stained areas. Pull back the seal to
inspect all areas under the seal and to check for foreign
objects.
CLEANING THE DISPENSER
You may nd laundry product residue leftover in your
dispenser compartments. To remove residue, follow this
recommended cleaning procedure:
1. Pull dispenser drawer out until it stops.
2. Press down on the release tab and pull straight out to
remove the dispenser.
3. Lift off cover panel by
pulling straight up.
4. Wash dispenser and
cover panel in warm,
soapy water, using a mild
detergent.
5. Rinse with warm water.
6. Air dry or wipe with a
clean towel, slide cover
panel back onto posts on
dispenser.
7. Align edges of dispenser
with guides in washer,
then slide dispenser
back into slot.
IMPORTANT: Dispenser is
not dishwasher safe.
Seal
WASHER MAINTENANCE
3. If stained areas are found, wipe down these areas of the
seal, using the procedure that follows.
Mix a dilute solution, using 3/4 cup (177 mL) of liquid a)
chlorine bleach, and 1 gal. (3.8 L) of warm tap water.
Wipe the seal area with the dilute solution, using b)
a damp cloth.
Let stand 5 minutes.c)
Wipe down area thoroughly with a dry cloth and let the d)
washer interior air dry with door open.
IMPORTANT: Wear rubber gloves when cleaning for
prolonged periods. Refer to the bleach manufacturer’s
instructions for proper use.
16
First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
If you experience Possible Causes Solution
Feet may not be in contact with the
oor and locked.
Front and rear feet must be in rm contact with oor, and washer
must be level to operate properly. Jam nuts must be tight
against the bottom of the cabinet.
Check oor for exing or sagging. If ooring is uneven, a 3/4"
(19 mm) piece of plywood under your washer will reduce sound.
See “Level the Washer” in the Installation Instructions.
Load could be unbalanced
or too large.
Avoid tightly packing the load. Avoid washing single items.
Balance a single item such as a rug or jeans jacket with a
few extra items.
Use Bulky Item cycle for oversized, non-absorbent items
such as comforters or poly-lled jackets. Other items are
not appropriate for Bulky Items cycle. See “Cycle Guide”.
Item or load not suitable for selected cycle. See “Cycle Guide”
and “Using Your Washer” in this Use and Care Guide.
Empty pockets before washing. Loose items such as coins
could fall between basket and tub or may block pump.
It may be necessary to call for service to remove items.
Fill hoses not attached tightly. Tighten ll-hose connection.
Are all four ll hose at washers properly seated?
Drain hose connection. Check that the drain hose is properly secured to drainpipe or
laundry tub.
Check household plumbing for leaks
or clogged sink or drain.
Water can backup out of a clogged sink or drainpipe. Check
all household plumbing for leaks (laundry tubs, drain pipe,
water pipes, and faucets.)
Fill hose washers.
Noises
It is normal to hear metal items on clothing such as metal snaps,
buckles, or zippers touch against the stainless steel basket.
Objects caught in washer
drain system.
Clicking or metallic
noises
Gurgling or humming It is normal to hear the pump making a humming sound with
periodic gurgling or surging asnal amounts of water are removed
during the spin/drain cycles.
Washer may be draining water.
Water Leaks
Check the following for
proper installation:
TROUBLESHOOTING
Vibration, rocking, or
“walking”
Load not completely
covered in water.
Water level not visible on door or
does not cover clothes.
This is normal for an HE front load washer. The washer senses load
sizes and adds the correct amount of water for optimal cleaning.
Washer not performing as expected
Washer may not be level.
Vibration or Off-Balance
The door will lock unlock and lock again. You will hear three
clicks after pushing start. This is normal.
Door locking or unlocking.
Not using HE detergent or using too
much HE detergent.
Only use HE detergent. Suds from regular detergents can
cause leaking from the door or rear of cabinet. Always measure
detergent and follow manufacturer’s directions based on your
load requirements.
Water or suds leaking
from door or rear of
cabinet
Residue on door glass. Periodically clean the the underside of the glass window to
avoid potential leaks.
17
If you experience Possible Causes Solution
Normal washer operation. Door must be completely closed and latched for washer to run.
Washer will pause during certain phases of cycle.
Do not interrupt cycle.
Washer may be stopped to reduce suds.
Washer won’t run or ll,
washer stops working
Check for proper water supply. Both hoses must be attached and have water owing to
inlet valve.
Both Hot and Cold water faucets must be turned on.
Check that inlet valve screens have not become clogged.
Check for any kinks in inlet hoses, which can restrict water ow.
Plug power cord into a grounded 3 prong outlet.
Do not use an extension cord.
Ensure there is power to outlet.
Reset a tripped circuit breaker. Replace any blown fuses.
NOTE: If problems continue, contact an electrician.
Check proper electrical supply.
Washer not loaded as recommended. Remove several items, rearrange load evenly in drum.
Close door and press START/PAUSE.
Do not add more than 1 or 2 additional items after cycle has
started to avoid overloading or unbalancing.
Not using HE detergent or using too
much HE detergent.
Only use HE detergent. Suds from regular detergents can slow
or stop the washer. Always measure detergent and following
manufacturers directions based on your load requirements.
To remove suds, cancel cycle. Select RINSE/DRAIN & SPIN.
Press START/PAUSE. Do not add more detergent.
After any wash cycle is completed, the door must be opened
and then closed before a new cycle can begin.
First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
Washer not performing as expected (cont.)
Do not add more water to the washer.
Door not opened between cycles.
18
Washer not performing as expected (cont.)
If you experience Possible causes Solution
Incorrect or wrong
wash or rinse
temperatures
Check for proper water supply. Are hot and cold inlet hoses reversed?
Both hoses must be attached to both washer and faucet, and
have both hot and cold water owing to inlet valve.
Check that inlet valve screens are not clogged.
Remove any kinks in hoses.
Load not rinsed Check for proper water supply.
First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
TROUBLESHOOTING
Not all settings and options are
available for all cycles.
Are hot and cold inlet hoses reversed?
Both hoses must be attached and have water owing to the
inlet valve.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
Not using HE detergent or using too
much HE detergent.
The suds from regular detergent can cause the washer
to operate incorrectly.
Use only HE detergent. Always measure detergent and follow
manufacture’s directions based on load size and soil level.
Washer not loaded as recommended. Avoid tightly packing the washer. The washer will not rinse well
if tightly packed. Load with dry items only. See the “Cycle
Guide” for load size recommendations for each cycle.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer has started.
Warm* selection not
available.
See the “Cycle Guide” for the available settings and options for
each cycle.
Using cycles with a lower spin speed. Cycles with lower spin speeds remove less water than cycles
with high spin speeds. Use the recommended cycle/speed spin
for your garment.
Washer not loaded as recommended.
Small items may have been caught in pump.
Empty pockets and use garment bags
for small items.
A tightly packed or unbalanced load may not allow the washer
to spin correctly, leaving the load wetter than normal. See
“Cycle Guide” for Load Size Recommendation for each cycle.
Washer not draining/
spinning, loads are
still wet
Check plumbing for correct drain
hose installation. Drain hose extends
into standpipe farther than 4.5"
(114 mm).
Check drain hose for proper installation. Use drain hose form
and securely attach to drainpipe or tub. Do not tape over drain
opening. Lower drain hose if the end is higher than 96" (2.4 m)
above the oor. Remove any clogs from drain hose.
Not using HE detergent or using too
much HE detergent.
Use only HE detergent. Suds from regular detergent or using too
much detergent can slow or stop draining or spinning. Always
measure and follow manufacturer’s directions for your load.
To remove extra suds, Select RINSE/DRAIN & SPIN.
Do not add detergent.
Select DRAIN & SPIN to remove any water remaining in RINSE/
the washer. The washer door will unlock at the end of the drain.
Water remaining in washer after cycle.
Door locked at end of
wash cycle.
The load may be out of balance. Avoid washing single items. Balance a single item such as a rug
or jeans jacket with a few extra items.
Spin speed set to No Spin.
Fresh Hold option not
selectable.
Fresh Hold™ option is not available if No Spin is selected.
19
If you experience Possible Causes Solution
First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
Not using correct cycle for fabric type.
Not using dispensers.
Not washing like colors together.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
If using Small Load cycle, wash only a few items.
Use Whites and Power Wash cycle for tough cleaning.
Add an extra rinse for heavily soiled loads.
Use dispensers to avoid chlorine bleach and fabric softener
staining.
Load dispensers before starting a cycle.
Avoid overlling.
Do not add products directly to load.
Wash like colors together and remove promptly after the cycle is
complete to avoid dye transfer.
Use more detergent for washing heavy soils in cold or
hard water.
Washer not performing as expected (cont.)
Monthly maintenance not done as
recommended.
Run the Clean Washer with AFFRESH™ cycle monthly.
See “Cleaning Your Washer” in Washer Maintenance .
Unload washer as soon as cycle is complete. Use the Fresh
Hold option if load cannot be removed immediately after the
wash is complete.
Use only HE detergent. Be sure to measure correctly. Always
follow the manufacturer’s directions.
See “Cleaning your Washer” section.
This washer has a tight seal to avoid water leaks. To avoid
odors, leave the door open to allow the washer to dry
between uses.
Odors
Not using HE detergent or using too
much HE detergent.
Door not left open after use.
Not enough detergent used,
or hard water.
Washer not loaded as recommended.
Not cleaning or
removing stains
Add load loosely. Items need to move freely for best cleaning.
See the “Cycle Guide” for load size recommendations for each
cycle.
Add only 1 or 2 garments after washer has started.
Not using HE detergent or using too
much HE detergent.
Use only HE detergent. Always measure detergent and follow
manufacture’s directions based on load size and soil level.
Hard water or high level of iron (rust)
in water.
You may need to install a water softener and/or iron lter.
Fabric softener dispensing ball used. Dispensing balls will not operate correctly with this washer.
Add liquid fabric softener to the fabric softener compartment.
Powdered detergent used for
low-speed cycle.
Consider using liquid detergent.
Load is tangling Washer not loaded as recommended. Add load loosely. Items need to move freely reduce
wrinkling and tangling. See the “Cycle Guide” for load
size recommendations for each cycle.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Select a slower spin speed. Note that items will be wetter
than when using a higher speed spin.
Wash action and/or spin speed too
fast for load.

Produkt Specifikationer

Mærke: Maytag
Kategori: Vaskemaskine
Model: Maxima MHW6000XR

Har du brug for hjælp?

Hvis du har brug for hjælp til Maytag Maxima MHW6000XR stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vaskemaskine Maytag Manualer

Maytag

Maytag MFW7020RU Manual

17 Februar 2025
Maytag

Maytag MFW7020RF Manual

1 Januar 2025
Maytag

Maytag MAT20CSAWW Manual

2 September 2024
Maytag

Maytag MAT20PDAWW Manual

2 September 2024
Maytag

Maytag MVW5435PW Manual

1 September 2024
Maytag

Maytag Performance MHWE400WW Manual

24 August 2024
Maytag

Maytag MHW8200FC Manual

24 August 2024
Maytag

Maytag MED8200F Manual

24 August 2024
Maytag

Maytag MVWB755DW Manual

24 August 2024
Maytag

Maytag MHN33PD Manual

24 August 2024

Vaskemaskine Manualer

Nyeste Vaskemaskine Manualer

Hotpoint

Hotpoint NDB 10748 WA Manual

8 April 2025
Arçelik

Arçelik 9120 MP OG Manual

6 April 2025
Bosch

Bosch SHX78DM5N Manual

6 April 2025
Bosch

Bosch SHV78DM3N Manual

6 April 2025
Hotpoint

Hotpoint WMTG 725B Manual

5 April 2025
Samsung

Samsung WD106UHSAWQ Manual

4 April 2025
Samsung

Samsung WA14KSQ1 Manual

4 April 2025
Samsung

Samsung WF-J124A Manual

4 April 2025
Bosch

Bosch WUU28T42 Manual

30 Marts 2025
Fagor

Fagor 5FS-85614 Manual

30 Marts 2025