Maytag W10113902 Manual

Maytag Ikke kategoriseret W10113902

Læs gratis den danske manual til Maytag W10113902 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Maytag W10113902, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

FILLER STRIP INSTALLATION INSTRUCTIONS

for Slide-In Ranges

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

Tools Needed

■#2 Phillips or #2 square tip screwdriver

■Measuring tape

■Electric drill

■¹⁄₈" (3 mm) drill bit

■Pliers

■Marker or pencil

Parts Supplied

■Filler strip

■2 Mounting brackets

■4 #8–18 x ¹⁄₂" screws

NOTE: This filler strip is used only when the opening depth for the

slide-in range is deeper than the recommended opening depth.

Install Filler Strip

1. The filler strip can be used to fill gaps of 2⁵⁄₈" (67 mm),

2¹⁄₄" (57 mm), or 1¹⁄₂" (38 mm).

It is recommended to mount the filler strip flush to the

countertop but it is not necessary.

2. Determine the approximate gap between the back of the

countertop cutout and slide-in range by measuring the

distance from the back of the countertop cutout to the front of

the countertop and subtracting 22³⁄₄" (57.8 cm) from the total.

3. Rotate the filler strip to determine the filler strip depth that

best fills the gap.

4. Align the filler strip edge to the back of the countertop cutout

and the countertop cutout sides. To keep the filler strip

straight, check that the back edge of the filler strip is flush to

the back wall of the countertop cutout.

A. 2⁵⁄₈" (67 mm)

B. 2¹⁄₄" (57 mm)

C. 1¹⁄₂" (38 mm)

A. Filler strip

B. Countertop

C. Countertop cutout

W10114233

5. Place the mounting brackets on each corner of the bottom

side of the selected filler strip depth. Use a pair of pliers to fold

the lower end tab of the bracket at the notch so that the tab

acts as a support for the bottom edge of the filler strip.

For 2¹⁄₄" (57 mm) and 2⁵⁄₈" (67 mm) depths, the bracket end

tab should be folded at a 90° angle.

For 1¹⁄₂" (38 mm) depth, the bracket end tab should be folded

at a 45° angle.

NOTE: If the bracket is not flush to the side of the cabinet, use

a piece of wood to fill the gap. A longer screw may be needed.

If the depth determined is 1¹⁄₂" (38 mm), the brackets should

be attached on the 2⁵⁄₈" (67 mm) side. If the depth determined

is 2¹⁄₄" (57 mm), the brackets should be attached on the

2⁵⁄₈" (67 mm) side. If the depth determined is 2⁵⁄₈" (67 mm),

the bracket should be attached on the 2¹⁄₄" (57 mm) side.

6. Mark the holes on the sides of the cabinet where the brackets

will be mounted.

7. Drill the holes as marked. Mount the brackets onto the sides

of the cabinets with the four #8–18 x ¹⁄₂" screws provided.

8. Remove the adhesive strip cover to expose the adhesive side

of the brackets. Attach the filler strip to the adhesive on the

mounting brackets with selected filler strip depth facing up.

9. Proceed with normal range installation. See Slide-in Range

Installation Instructions.

A. Filler strip

B. Cabinet side

C. Mounting bracket tab

D. Mounting bracket

E. Folded tab for support

Produkt Specifikationer

Mærke:	Maytag
Kategori:	Ikke kategoriseret
Model:	W10113902

Har du brug for hjælp?

Hvis du har brug for hjælp til Maytag W10113902 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Maytag Manualer

Maytag XHPC155MBK Manual

27 Juli 2025

Maytag WHP0400VW Manual

15 Oktober 2024

Maytag MMMS4230PZ Manual

24 August 2024

Maytag MOES6030LZ Manual

24 August 2024

Maytag MALAUMGD6630HW Manual

24 August 2024

Maytag W10748976 Manual

24 August 2024

Maytag W10915235 Manual

24 August 2024

Maytag MVWP586GW Manual

24 August 2024

Maytag W10225948 Manual

24 August 2024

Maytag W10315283RP Manual

24 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

NUX Amp Core Studio Manual

30 August 2025

Dometic TD283 Manual

30 August 2025

Laserworld PL-20 MK3 Manual

30 August 2025

Puls Dimension CP10.242 Manual

30 August 2025

Bebob S1MICRO Manual

30 August 2025

Be Quiet! Light Wings PWM 140x140x25 Manual

30 August 2025

Ventev CT-BKT-655 Manual

30 August 2025

American DJ ENCORE LP32IP Manual

30 August 2025

Thermex Caremex Hygiene Station Manual

30 August 2025

Bartscher TK60 Manual

30 August 2025