MB Quart NHT1-120BPR Manual

MB Quart Højttaler NHT1-120BPR

Læs gratis den danske manual til MB Quart NHT1-120BPR (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om MB Quart NHT1-120BPR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

The NHT1 clamping system is designed for

towers and support structures that utilize ROUND

tubing. Oval tubing and at structures will not

work with this clamp. The NHT1 clamp can be

used with tube diameters from 1.5” up to 2.75”.

Included are separate bushing sets for all tube

sizes at 1/8” increments. Refer to the table below

to determine your conguration.

Choose a suitable

mounting location

Mounting Location

Dimensions

CAUTION

Always consider consulting a professional audio installer

before installing new speakers. Many manufacturers locate

speakers behind interior panels that require special tools to

remove. Be careful and take your time.

If you are using the speaker wire supplied with your new

speakers make sure that you run the speaker wires only

through safe areas. Do not let speaker wire make contact with

metal edges or hot engine components.

Congratulations on your choice of a MBQuart speaker.

This “Quick Start” Installation guide is meant to help

you complete a basic installation. For more detailed

information on system setting, speaker and subwoofer

conguration, and full specications by model, visit our

website at mbquart.com

It’s a good idea to conrm that you have purchased the

correct size speakers to t your application. If you have any

reservations about being able to complete the installation

yourself, we recommend contacting a professional.

Before you start

Carefully select a route for the audio signal

wires. If using existing speaker wires, conrm

that the wire is in good shape and not

shorted. In the case of an illuminated model,

route a positive and negative wire from a

switched +12V source. Avoid routing wires

through dangerous areas.

Route signal and

illumination wires

Wiring

230mm

9.04”

104mm

4.08”

44mm

1.73”

274mm

10.78”

215mm

8.47”

Tube

Diameter

Tube

Circumference

Clamp Top

Bushing

Bottom

Bushing

1.5 4.71 A 1.50 1.50

1.625 5.10 A 1.63 1.63

1.75 5.50 A 1.75 1.75

1.875 5.89 A none 1.88

2 6.28 B 2.00 2.00

2.125 6.68 B 2.13 2.13

2.25 7.07 B 2.25 2.25

2.375 7.46 B 2.38 2.38

2.5 7.85 B 2.50 2.50

2.625 8.25 B 2.68 2.68

2.75 8.64 B none none

Black ...................................... Audio signal negative

Black w/white stripe ................ Audio signal positive

Black ....................................... Illumination negative

Red ......................................... Illumination positive

MB Quart products are designed and engineered in the USA by

www.maxxsonics.com

Quick Start

Installation Guide

WARRANTY

Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from

defects in material and workmanship for a period of one (1) year from the date of purchase.

Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty

period. Components that prove to be defective in materials and workmanship under proper installation

and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was

purchased. A photocopy of the original receipt must accompany the product being returned. The

costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics

USA Inc. This warranty is limited to defective parts and specically excludes any incidental or

consequential damages connected therewith. To view the full warranty, please visit the website.

NHT1-120B

NHT1-120LB

NHT1-120W

NHT1-120LW

NAUTIC

MBQ NHTT QSG 01 - rev1

Your NHT1 speakers can be aligned to “hang

straight” on an angled tube by loosening, rotating

and re-mounting the speaker. Just behind the

speaker mounting holes is a series mounting holes

that can be used to align the speaker in the pod.

If you have purchased an illuminated version, consider getting an N1-RC remote

control. The remote allows you to adjust color, speed and brightness of the

illumination. Check with an authorized MBQuart retailer or check our website

www.mbquart.com for further details.

Adjust the speaker

alignment

Grill alignment

Illumination control

Produkt Specifikationer

Mærke:	MB Quart
Kategori:	Højttaler
Model:	NHT1-120BPR

Har du brug for hjælp?

Hvis du har brug for hjælp til MB Quart NHT1-120BPR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler MB Quart Manualer

MB Quart NK2-116W Manual

17 Juni 2025

MB Quart NF1-116SW Manual

17 Juni 2025

MB Quart NHT1-120BPR Manual

17 Juni 2025

MB Quart NH2-120 Manual

11 Marts 2025

MB Quart NH2-116 Manual

11 Marts 2025

MB Quart TS1-2810 Manual

10 Marts 2025

MB Quart TC1-118 Manual

10 Marts 2025

MB Quart FKB146 Manual

22 September 2024

MB Quart FKB108 Manual

22 September 2024

MB Quart FKB113 Manual

22 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Sogo SS-8586 Manual

17 Juni 2025

Sogo SS-8585 Manual

17 Juni 2025

DS18 PRO-X8.4RGBCAP Manual

17 Juni 2025

Sogo SS-8590 Manual

17 Juni 2025

Sogo SS-8790 Manual

17 Juni 2025

DS18 Hydro NXL-8M Manual

17 Juni 2025

Earthquake Sound PR-EQ5S8 Manual

17 Juni 2025

Sogo SS-8780 Manual

17 Juni 2025

DS18 PRO-X6.4BMRGB Manual

17 Juni 2025

DS18 PRO-X4.4BMSL Manual

17 Juni 2025