Megger PAT4DV3 Manual

Megger Måling PAT4DV3

Læs gratis den danske manual til Megger PAT4DV3 (51 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Megger PAT4DV3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/51

User Guide

PAT4DV/3 & 4DVF/3

Portable Appliance Testers

SAFETY

Symbols used on the instrument.

Caution: Refer to accompanying notes Risk of electric shock.

Equipment complies with relevant EU Directive

SAFETY WARNINGS

• Safety Warnings and Precautions must be read and understood before the instrument is used. They must be observed during use.

• For safety, PAT4 must be properly earthed. Only use a supply socket that has a protective earth contact. If there is any doubt as to

the effectiveness of the supply socket earth, connect a known good earth to the earthing point on the PAT4 front panel.

• Test leads, probes and crocodile clips must be in good order, clean and with no broken or cracked insulation. The flash test probe must

be held behind the handguard, and only be connected to the PAT4 for the duration of the test.

• For safety, tests are performed in the correct order. If an asset (appliance) fails a test, PAT4 will fail the asset and exit the test sequence.

The fault causing the failure must be corrected before the appliance is re-tested.

• During testing, ensure that no hazard will exist if the asset operates as a result of normal running, or of a fault condition.

• Assets should not be routinely flash tested.

• Where assets have to be flash tested, see ‘Flash Testing – Warnings’ on page 11.

• When performing an Insulation test the asset must not be touched.

• Only perform an Operation test after an Earth Bond Test (Class 1 only) and Insulation Test (Class 1 or Class 2) have been verified.

• The instrument should not be used if any part of it is damaged.

• Replacement fuses must be of the correct type and rating. See ‘Fuses’ section.

NOTE: THE INSTRUMENT MUST ONLY BE USED BY SUITABLY TRAINED AND COMPETENT PERSON

Produkt Specifikationer

Mærke:	Megger
Kategori:	Måling
Model:	PAT4DV3

Har du brug for hjælp?

Hvis du har brug for hjælp til Megger PAT4DV3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Megger Manualer

Megger ODEN AT Manual

12 Oktober 2025

Megger Surgeflex 25 Manual

12 Oktober 2025

Megger TTR550005B Manual

12 Oktober 2025

Megger TTR100 Manual

12 Oktober 2025

Megger PAM420 Manual

12 Oktober 2025

Megger NIM1000 Manual

12 Oktober 2025

Megger PAT4DV3 Manual

12 Oktober 2025

Megger MIT30 Manual

12 Oktober 2025

Megger SMRT33 Manual

12 Oktober 2025

Megger Baker WinAST Manual

12 Oktober 2025

Måling Manualer

Nyeste Måling Manualer

Joy-It DSO-LCR500 Manual

9 Oktober 2025

Joy-It DSO-138-Mini Manual

8 Oktober 2025

Joy-It JT-TC66C Manual

8 Oktober 2025

Triplett GSM050 Manual

7 Oktober 2025

Triplett GSM120 Manual

7 Oktober 2025

Joy-It COM-VM330 Manual

7 Oktober 2025

2 Oktober 2025

2 Oktober 2025

2 Oktober 2025

2 Oktober 2025