MeldaProduction MDoubleTracker Manual

MeldaProduction Audio Software MDoubleTracker

Læs gratis den danske manual til MeldaProduction MDoubleTracker (53 sider) i kategorien Audio Software. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om MeldaProduction MDoubleTracker, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/53
MDoubleTracker
MDoubleTracker is a marvelous natural sounding artificial stereo expander based on some pretty old techniques used for decades on some
hardware modules such as Eventide H3000. We just polished it a bit and provided a few more controls as usual. In most cases you simply
insert the plugin onto guitars, vocals or just any material that needs to sound big and let the plugin do the magic. Presets should be the first
aid if it doesn't sound as good as you'd like. And if even that fails, then the following information may give you the necessary pointers.
One important thing that needs to be noted - unlike MStereoSpread and MStereoGenerator, the algorithm of MDoubleTracker is not mono
compatible. That may be a problem, if you suspect your audio may be collapsed to mono on some playback equipment. While problems with
mono compatibility are pretty common and cannot be avoided, it's worth checking how the results would sound in mono, and
MDoubleTracker has a handy switch for that.
How does MDoubleTracker work
MDoubleTracker tries to simulate the good old trick of recording the same performance multiple times, panning one to the left and the other
to the right. That produces the classig big sound commonly used on guitars and vocals for example. While recording the same performance
multiple times is very tedious, complex and error-prone process, producing such a thing automatically provides an extremely efficient
alternative.
To do that, MDoubleTracker uses a system of variating delaylines to pitch-shift each channel just a little bit, up on one side, down on the
other. Additionally it can delay each channel differently and the difference between channels is slowly evolving. As a result, different signals
are produced for both left and right (and potentially surround) channels, creating a sensation of the performance being just a little bit
different on each side, enough to produce the big wide stereo sound. When Dry/Wet may be used to create sort of a phasing / chorusey
effect, useful creatively.
Presets
Presets button shows a window with all available presets. A preset can be loaded from the preset window by double-clicking on it, selecting
via the buttons or by using your keyboard. You can also manage the directory structure, store new presets, replace existing ones etc.
Presets are global, so a preset saved from one project, can easily be used in another. The arrow buttons next to the preset button can be
used to switch between presets easily.
Holding Ctrl while pressing the button loads a random preset. There must be some presets for this feature to work of course.
Presets can be backed up by 3 different methods:
A) Using "Backup" and "Restore" buttons in each preset window, which produces a single archive of all presets on the computer.
B) Using "Export/Import" buttons, which export a single folder of presets for one plugin.
C) By saving the actual preset files, which are found in the following directories (not recommended):
Windows: C:\Users\{username}\AppData\Roaming\MeldaProduction
Mac OS X: /Library/Application support/MeldaProduction
Files are named based on the name of the plugin like this: "{pluginname}.presets", so for example MAutopan.presets or MDynamics.presets.
If the directory cannot be found on your computer for some reason, you can just search for the particular file.
Please note that prior to version 16 a different format was used and the naming was "{pluginname}presets.xml".
The plugin also supports
an online preset exchange. If the computer is connected to the internet, the plugin connects to our server once a week, submits your
presets and downloads new ones if available. This feature is manually maintained in order to remove generally unusable presets, so it may
take some time before any submitted presets become available. This feature relies on each user so we strongly advise that any submitted
presets be named and organised in the same way as the factory presets, otherwise they will be removed.
Left arrow
Left arrow button loads the previous preset.
Right arrow
Right arrow button loads the next preset.
Randomize
Randomize button loads a random preset.
Randomize
Randomize button (with the text 'Random') generates random settings. Generally, randomization in plug-ins works by selecting random
values for all parameters, but rarely achieves satisfactory results, as the more parameters that change the more likely one will cause an
unwanted effect. Our plugins employ a smart randomization engine that learns which settings are suitable for randomization (using the
existing presets) and so is much more likely to create successful changes.
In addition, there are some mouse modifiers that assist this process. The smart randomization engine is used by default if no modifier keys
are held.
Holding Ctrl while clicking the button constrains the randomization engine so that parameters are only modified slightly rather than
completely randomized. This is suitable to create small variations of existing interesting settings.
Holding Alt while clicking the button will force the engine to use full randomization, which sets random values for all reasonable automatable
parameters. This can often result in "extreme" settings. Please note that some parameters cannot be randomized this way.
Panic
Panic button resets the plugin state. You can use it to force the plugin to report latency to the host again and to avoid any audio problems.
For example, some plugins, having a look-ahead feature, report the size of the look-ahead delay as latency, but it is inconvenient to do that
every time the look-ahead changes as it usually causes the playback to stop. After you tweak the latency to the correct value, just click this
button to sync the track in time with the others, minimizing phasing artifacts caused by the look-ahead delay mixing with undelayed audio
signals in your host. It may also be necessary to restart playback in your host.
Another example is if some malfunctioning plugin generates extremely high values for the input of this plugin. A potential filter may start
generating very high values as well and as a result the playback will stop. You can just click this button to reset the plugin and the playback
will start again.
Settings
Settings button shows a menu with additional settings of the plugin. Here is a brief description of the separate items.
Licence manager lets you activate/deactivate the plugins and manage subscriptions. While you can simply drag & drop a licence file onto
the plugin, in some cases there may be a faster way. For instance, you can enter your user account name and password and the plugin will
do all the activating for you.
There are 4 groups of settings, each section has its own detailed help information: GUI & Style enables you to pick the GUI style for the
plug-in and the main colours used for the background, the title bars of the windows and panels, the text and graphs area and the
highlighting (used for enabled buttons, sliders, knobs etc).
Advanced settings configures several processing options for the plug-in.
Global system settings contains some settings for all MeldaProduction plugins. Once you change any of them, restart your DAW if
needed, and it will affect all MeldaProduction plugins.
Dry/Wet affects determines, for Multiband plug-ins, which multiband parameters are affected by the Global dry/wet control.
Smart interpolation adjusts the interpolation algorithm used when changing parameter values; the higher the setting the higher the audio
quality and the lower the chance of zippering noise, but more CPU will be used.
WWW
WWW button shows a menu with additional information about the plugin. You can check for updates, get easy access to support,
MeldaProduction web page, video tutorials, Facebook/Twitter/YouTube channels and more.

Produkt Specifikationer

Mærke: MeldaProduction
Kategori: Audio Software
Model: MDoubleTracker

Har du brug for hjælp?

Hvis du har brug for hjælp til MeldaProduction MDoubleTracker stil et spørgsmål nedenfor, og andre brugere vil svare dig


Audio Software MeldaProduction Manualer

MeldaProduction

MeldaProduction MCabinet Manual

19 Juli 2025
MeldaProduction

MeldaProduction MDoubleTracker Manual

19 Juli 2025
MeldaProduction

MeldaProduction MGuitarArchitect Manual

27 Januar 2025
MeldaProduction

MeldaProduction MStereoProcessor Manual

31 August 2024
MeldaProduction

MeldaProduction MAutoAlign Manual

31 August 2024
MeldaProduction

MeldaProduction MMorph Manual

31 August 2024
MeldaProduction

MeldaProduction MUltraMaximizer Manual

31 August 2024
MeldaProduction

MeldaProduction MEqualizerLinearPhase Manual

31 August 2024
MeldaProduction

MeldaProduction MCompare Manual

31 August 2024
MeldaProduction

MeldaProduction MAutoVolume Manual

31 August 2024

Audio Software Manualer

Nyeste Audio Software Manualer

Blue Cat Audio

Blue Cat Audio AcouFiend Manual

20 Juli 2025
Roland

Roland Zenology Pro Manual

20 Juli 2025
MIA Laboratories

MIA Laboratories Musiqual Blue MkII Manual

19 Juli 2025
FabFilter

FabFilter Timeless 3 Manual

19 Juli 2025
CEDAR

CEDAR Studio 9 Manual

19 Juli 2025
MIA Laboratories

MIA Laboratories Azulle Green MKII Manual

19 Juli 2025
Sonible

Sonible pure:comp Manual

19 Juli 2025
Modalics

Modalics Beat Scholar Manual

17 Juli 2025
Wave Arts

Wave Arts MultiDynamics 7 Manual

17 Juli 2025
Arturia

Arturia Rev LX-24 Manual

17 Juli 2025