Metabo CN 18DSL Manual

Metabo Kværn CN 18DSL

Læs gratis den danske manual til Metabo CN 18DSL (53 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Metabo CN 18DSL, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/53
Model
Modèle
Modelo CN 18DSL
Cordless Nibbler
Grignoteuse sans fi l
Punzonadora a batería
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
2
English
IMPORTANT SAFETY INSTRUCTIONS
Read all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or
maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the "SAFETY" section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by WARNINGS on the power
tool and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifi cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tiredor
under the infl uence of drugs, alcohol or
medication.

Produkt Specifikationer

Mærke: Metabo
Kategori: Kværn
Model: CN 18DSL

Har du brug for hjælp?

Hvis du har brug for hjælp til Metabo CN 18DSL stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kværn Metabo Manualer

Metabo

Metabo GVB 18 LTX BL 11-7 HT Manual

7 August 2025
Metabo

Metabo GVB 18 LTX BL 11-28 C Manual

7 August 2025
Metabo

Metabo DS 200 Plus Manual

7 August 2025
Metabo

Metabo CC14SFS Manual

17 Juni 2025
Metabo

Metabo VB16Y Manual

17 Juni 2025
Metabo

Metabo TNS 175 Manual

8 Juni 2025
Metabo

Metabo G 12SR4 Manual

6 Juni 2025
Metabo

Metabo WVPBF 18 LTX BL 15-150 Quick Manual

3 Februar 2025
Metabo

Metabo WVBF 18 LTX BL 15-125 Quick Manual

21 Januar 2025
Metabo

Metabo W 750-100 Manual

7 December 2024

Kværn Manualer

Nyeste Kværn Manualer

Camry

Camry CR 4301 Manual

12 August 2025
Makita

Makita DCC500 Manual

12 August 2025
DeWalt

DeWalt DCG426 Manual

10 August 2025
Ozito

Ozito LRT-4100U Manual

9 August 2025
DeWalt

DeWalt DWE4015 Manual

9 August 2025
DeWalt

DeWalt DWE4599 Manual

9 August 2025
Ozito

Ozito EGR-2050U Manual

9 August 2025
Ozito

Ozito PXAGS-500U Manual

9 August 2025
DeWalt

DeWalt DWE4206 Manual

9 August 2025
DeWalt

DeWalt DCG460 Manual

9 August 2025