Metabo G 10SR4 Manual

Metabo Kværn G 10SR4

Læs gratis den danske manual til Metabo G 10SR4 (24 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Metabo G 10SR4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/24
Handling instructions
Instrucciones de manejo
Instruções de uso
G 10SR4 G 12SR4 G 13SR4 ・ ・
en
es
pt
en
es
pt
2
English
Carrying power tools with your fi nger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off .
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may aff ect the
power tool s operation.ʼ
If damaged, have the power tool repaired before
use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool for operations diff erent from
those intended could result in a hazardous situation.
5) Service
a)
Have your power tool serviced by a qualifi ed repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the infl uence of drugs, alcohol or
medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off position before connecting to
power source and/or battery pack, picking up or
carrying the tool.

Produkt Specifikationer

Mærke: Metabo
Kategori: Kværn
Model: G 10SR4

Har du brug for hjælp?

Hvis du har brug for hjælp til Metabo G 10SR4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kværn Metabo Manualer

Metabo

Metabo CC14SFS Manual

17 Juni 2025
Metabo

Metabo VB16Y Manual

17 Juni 2025
Metabo

Metabo TNS 175 Manual

8 Juni 2025
Metabo

Metabo G 12SR4 Manual

6 Juni 2025
Metabo

Metabo WVPBF 18 LTX BL 15-150 Quick Manual

3 Februar 2025
Metabo

Metabo WVBF 18 LTX BL 15-125 Quick Manual

21 Januar 2025
Metabo

Metabo W 750-100 Manual

7 December 2024
Metabo

Metabo BS 175 Manual

5 September 2024
Metabo

Metabo G12SE3 Manual

3 Maj 2024
Metabo

Metabo WPBA 18 LTX BL 15-125 Quick Manual

30 April 2024

Kværn Manualer

Nyeste Kværn Manualer

Hitachi

Hitachi GP2S2 Manual

17 Juni 2025
Hilti

Hilti SL 5-22 Manual

15 Juni 2025
Victoria Arduino

Victoria Arduino Mythos MyOne Clima Pro Manual

12 Juni 2025
Tryton

Tryton TS152501 Manual

9 Juni 2025
Sogo

Sogo SS-5815 Manual

9 Juni 2025
Vulcan

Vulcan VS121301 Manual

9 Juni 2025
Sogo

Sogo SS-5265 Manual

9 Juni 2025
Smart365

Smart365 SM-04-04200 Manual

9 Juni 2025
Sogo

Sogo SS-5810 Manual

9 Juni 2025
Sogo

Sogo SS-5260 Manual

8 Juni 2025