Metabo G12SE3 Manual

Metabo Kværn G12SE3

Læs gratis den danske manual til Metabo G12SE3 (41 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Metabo G12SE3, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/41
Model
Disc Grinder
Modèle
Meuleuse à disque
Modelo
Amoladora angular
G 12SE3 • G 13SE3
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y com-
prenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para
que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual
debe ser guardado en un lugar seguro.
G12SE3
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before
operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections which contain
the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by WARNINGS on the power tool
and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifi cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the infl uence of drugs, alcohol or
medication.
2
English

Produkt Specifikationer

Mærke: Metabo
Kategori: Kværn
Model: G12SE3

Har du brug for hjælp?

Hvis du har brug for hjælp til Metabo G12SE3 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kværn Metabo Manualer

Metabo

Metabo CC14SFS Manual

17 Juni 2025
Metabo

Metabo VB16Y Manual

17 Juni 2025
Metabo

Metabo TNS 175 Manual

8 Juni 2025
Metabo

Metabo G 12SR4 Manual

6 Juni 2025
Metabo

Metabo WVPBF 18 LTX BL 15-150 Quick Manual

3 Februar 2025
Metabo

Metabo WVBF 18 LTX BL 15-125 Quick Manual

21 Januar 2025
Metabo

Metabo W 750-100 Manual

7 December 2024
Metabo

Metabo BS 175 Manual

5 September 2024
Metabo

Metabo G12SE3 Manual

3 Maj 2024
Metabo

Metabo WPBA 18 LTX BL 15-125 Quick Manual

30 April 2024

Kværn Manualer

Nyeste Kværn Manualer

Hitachi

Hitachi GP2S2 Manual

17 Juni 2025
Hilti

Hilti SL 5-22 Manual

15 Juni 2025
Victoria Arduino

Victoria Arduino Mythos MyOne Clima Pro Manual

12 Juni 2025
Tryton

Tryton TS152501 Manual

9 Juni 2025
Sogo

Sogo SS-5815 Manual

9 Juni 2025
Vulcan

Vulcan VS121301 Manual

9 Juni 2025
Sogo

Sogo SS-5265 Manual

9 Juni 2025
Smart365

Smart365 SM-04-04200 Manual

9 Juni 2025
Sogo

Sogo SS-5810 Manual

9 Juni 2025
Sogo

Sogo SS-5260 Manual

8 Juni 2025