Micca MB42 Manual

Micca Højttaler MB42

Læs gratis den danske manual til Micca MB42 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Micca MB42, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Home Audio Products

Micca MB42 4-Inch 2-Way Loudspeaker

Thank you for purchasing the Micca MB42

Bookshelf Speaker! This product has been

designed for optimal audio reproduction

performance in a variety of home

entertainment congurations, with accuracy,

clarity, and impact that discerning

audiophiles listen for.

Please take the time to become familiar with

the MB42 and the placement options as

detailed in this manual.

General Recommendations

Height - For stereo listening from a xed

listening area, the MB42 should ideally be

placed at the ear-level of the listener, with the

listener comfortably situated in the listening

location.

Separation - The distance between a pair of

MB42 speakers should be shorter than the

distance from the speakers to the listener. Tilt

the two speakers inward toward the listener

slightly for best results.

Orientation - The speakers provide the best

results in its normal vertical orientation. When

the speakers are placed much higher or much

lower than the recommended ear-level height,

the speakers can be placed on its side to

provide better o-axis performance in these less

than optimal placements.

Usage-Specic Recommendations

Bookshelf Speakers

When placed on bookshelves, it is important to

keep both speakers at the same height. Avoid

placing the speakers at dierent heights as this

will degrade the sound. Speaker height should

be selected so that it is as close to ear level as

possible while considering whether listeners will

be seated or standing in the listening area.

Stereo Speaker on Stands

When used with speaker stands, it is important

to select speaker stands that place the speakers

to the ear level of the listener. Do this by

measuring the height of the listener’s ear when

seated in the listening area, and subtracting 6

inches. For example, if the listener’s ear is

measured at 36 inches from the oor when

seated, select speaker stands that are

approximately 30 inches high.

Desktop Near-eld Monitor

The MB42 can be used as desktop/near-eld

monitor speakers, such as when placed to the

either side of a display or mixing console. If the

MB42 cannot be located near ear level, Monitor

isolation wedges like the Auralex MoPAD, as

well as inexpensive alternatives, can be used to

slightly tilt back the speakers, and to decouple

the speakers from the desk surface. Be aware

that the MB42 is not shielded and thus should

not be placed in proximity to CRT displays or

other magnetic-sensitive equipment.

Speaker Wire

The MB42 should be connected to the amplier

with good quality oxygen-free copper speaker

wire for best performance.

The gauge or thickness of the speaker wire can

aect the performance of the MB42. Always

choose a speaker wire of the appropriate gauge

to prevent excessive speaker wire resistance.

Using undersized speaker wire can result in lose

of volume, detail, and dynamic range. Please

select speaker wire for the MB42 based on the

following minimum recommendations:

50' or less - 16 Gauge 2 Conductor

50' - 80' - 14 Gauge 2 Conductor

80'-120' - 12 Gauge 2 Conductor

120'-200' - 10 Gauge 2 Conductor

Amplier Connection

Amplier speaker output terminals are typically

color coded with black for negative (-) and red

for positive (+). Similarly, the MB42 has speaker

wire terminals with a black and red color coding.

When connecting speaker wire, ensure that the

positive terminal on the amplier is connected to

the positive terminal on the MB42. And similarly,

the negative terminal on the amplier should be

connected to the negative terminal on the MB42.

Speaker wires typically use at least one of

several possible methods to help maintain

correct polarity, including color coded insulation

or conductor strands, or printing of text and

symbols along one side of the wire insulation.

Amplier Considerations

The MB42’s impedance varies between 4 to 8

Ohms. Care must be taken to ensure that the

amplier is capable of handling a 4-Ohm load.

Some ampliers have a switch that must be set

to select a 4-Ohm compatible operation mode.

Improper amplier selection or setup may result

in permanent damage to the amplier or speaker.

The MB42 can be used with ampliers between

15 to 100 watts per channel as long as

reasonable care is exercised. If there is audible

distortion, turn down the volume until the

distortion goes away. Never allow the speaker

and amplier to play for more than a few

seconds when there is audible distortion.

Removing the Grill

The MB42 has a removable grill that is held in

place by four friction pegs. To remove the grill,

carefully pry the grill o from edge until the

friction pegs are fully disengaged. To avoid

damaging the speaker drivers, do not touch

them either with or without the grill in place.

The MB42 can be used without the grills

installed as long as care is taken to prevent the

drivers from damage such as by hard/sharp

objects, liquids, pets, or hands. Store the grills in

a safe dry place when not in use.

MB42 Specications

Woofer: 4” Carbon Fiber Cone with Rubber Surround

Tweeter: 0.75” Silk Dome

Enclosure: Ported Cabinet

Frequency Response: 60Hz-20kHz (Typical In-Room)

Impedance: 4-8 Ohms

Sensitivity: 85dB 1W/1M

Power Handling: 75 Watts (Each)

Dimensions: 9.5” (H) x 5.8” (W) x 6.5” (D)

Information in this manual is believed to be accurate and reliable but Micca Ltd assumes no responsibility for its use nor for any

infringement of patents or other rights of third parties which may result from the use of this manual or the product. Micca

reserves the right to change product specications at any time without notice.

Micca, MB42, and the Micca logo are trademarks of Micca Ltd. Other trademarks referenced in this manual are the properties of

their respective owners.

Produkt Specifikationer

Mærke:	Micca
Kategori:	Højttaler
Model:	MB42

Har du brug for hjælp?

Hvis du har brug for hjælp til Micca MB42 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Micca Manualer

Micca MB42 Manual

23 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

DS18 PRO-TWN5 Manual

17 Juni 2025

DS18 PRO-CF69.4NR Manual

16 Juni 2025

DS18 PRO-FR6NEO Manual

16 Juni 2025

DS18 SLG-AR6V2 Manual

16 Juni 2025

DS18 Hydro NXL-6 Manual

16 Juni 2025

DS18 PRO-HY6.4B Manual

16 Juni 2025

DS18 PRO-HY6MSL Manual

16 Juni 2025

DS18 HYDRO JK-BD-LR Manual

16 Juni 2025

Induction Dynamics S1.8SW Manual

16 Juni 2025

DS18 PRO-NS 6.4 Manual

16 Juni 2025