Micro Matic DP-120D-36GR Manual


Læs gratis den danske manual til Micro Matic DP-120D-36GR (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Micro Matic DP-120D-36GR, eller vil du spørge andre brugere om produktet?

Side 1/2
Job Number:_____________________________________________ Location: ____________________________________________________________________ ____
Add European style while creating dispense excitement
Condition the glass before pouring – invert glass, push down on sprayer
for cold water rinsing
Robust 18 gauge stainless steel construction
Welded corners, nished smooth for safety and appearance
www.micromatic.com • 1
(
866
)
SURFACE MOUNT SERIES 5" X 36"
DRIP TRAY
5" WIDTH TRAY WITH GLASS RINSER
DP-120D-36GR
Brushed Stainless Steel
NSF Certied
(Rinser Only)
Specifications
Central
10726 North Second St.
Machesney Park, IL 61115
Tel. (815) 968-7557
Fax. (815) 968-0363
Southeast
2364 Simon Ct.
Brooksville, FL 34604
Tel. (352) 799-6331
Fax. (352) 796-2429
Northeast
4601 Saucon Creek Rd.
Center Valley, PA 18034
Tel. (610) 625-4464
Fax. (610) 625-4466
West
19791 Bahama St.
Northridge, CA 91324
Tel. (818) 701-9765
Fax. (818) 701-9844
Toll-Free: 1-866-327-4159
www.micromatic.com
©2016 Micro Matic USA, Inc. All Rights Reserved.
Dimensions
Rinser Water Inlet Installation
Always check local plumbing codes first.
Install in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure).
Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking).
Install in-line shut-off for the rinser system from the street water supply (this must be turned off nightly).
If teed into soda system make sure system can handle the increased water demand. Have plumber install a
45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system.
Install a shut-off for the rinser water supply if line is not hard plumbed into the system.
Micro Matic reserves the right to change specifications without notice.
000039S-D0216
127mm
5"
64mm
2 1/2"
64mm
2 1/2"
19mm
3/4"
457mm
18"
140mm
5 1/2"
Part No. Dimensions Description Shipping Weight Box Dimensions
DP-120D-36GR
5"W x 36"L x 3/4"H Stainless Steel TBD TBD
Drain:
Threaded Brass
3 1/2" x 5/8" - 18
1/2" O.D.
7/8" - 14
1/2" BSP
3 3/4" Dia.
GR-1561
914mm
36"


Produkt Specifikationer

Mærke: Micro Matic
Kategori: Ikke kategoriseret
Model: DP-120D-36GR

Har du brug for hjælp?

Hvis du har brug for hjælp til Micro Matic DP-120D-36GR stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Micro Matic Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer