Micro Matic DP-MET-H-40GR-Z Manual

Micro Matic Ikke kategoriseret DP-MET-H-40GR-Z

Læs gratis den danske manual til Micro Matic DP-MET-H-40GR-Z (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Micro Matic DP-MET-H-40GR-Z, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Job Number:_____________________________________________ Location: ____________________________________________________________________ ____

www.micromatic.com • 1

(

866

)

327-4159

DRIP TRAY

• Designed speciﬁcally for Metropolis H draft towers

• Add European style while creating dispense excitement

• Condition the glass before pouring - invert glass, push down on sprayer

for cold water rinsing

• Robust 18 gauge stainless steel construction

NSF Certiﬁed

(Rinser Only)

SURFACE MOUNT SERIES DRIP TRAY

SURFACE MOUNT SERIES WITH CUTOUT 8 1/2" X 40"

DP-MET-H-40GR-Z

Stainless Steel

DP-MET-H-PVD-40GR-Z

PVD Brass / Stainless Steel

Specifications

Central

10726 North Second St.

Machesney Park, IL 61115

Tel. (815) 968-7557

Fax. (815) 968-0363

Northeast

4601 Saucon Creek Rd.

Center Valley, PA 18034

Tel. (610) 625-4464

Fax. (610) 625-4466

West

19791 Bahama St.

Northridge, CA 91324

Tel. (818) 701-9765

Fax. (818) 701-9844

Toll-Free: 1-866-327-4159

www.micromatic.com

Dimensions

Rinser Water Inlet Installation

Micro Matic reserves the right to change specifications without notice.

• Always check local plumbing codes first

• Install in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure)

• Install in-line one way check valve from the street water supply (prevents pressure drop which can cause leaking)

• Install in-line shut off for the rinser system from the street water supply (this must be turned off nightly)

• If teed into soda system make sure system can handle the increased water demand. Have plumber install a

45° 1/2" O.D. barb for the drains if line is not hard plumbed into the system.

• Install a shut off for the rinser water supply if line is not hard plumbed into the system

Southeast

2386 Simon Ct.

Brooksville, FL 34604

Tel. (352) 799-6331

Fax. (352) 796-2429

000011S-D0117

203.2 [8.00]

R77.79 [R3.062]

TOWER PEDESTAL CENTER

508.0 [20.00]

139.7 [5.50]

1016.0 [40.00]

19.05 [0.75]

Drain: Threaded Brass

5/8" -18 UNF X 3 1/2" LONG

0.53" OD.

7/8" -14 UNF

1/2" BSP

215.9 [8.50]

63.5 [2.50]

101.6 [4.0]

Part No. Dimensions Finish Shipping Weight

DP-MET-H-40GR-Z

8 1/2"W x 40"L x 3/4"H Stainless Steel

TBD

DP-MET-H-PVD-40GR-Z

8 1/2"W x 40"L x 3/4"H PVD Brass / Stainless Steel

TBD

Produkt Specifikationer

Mærke:	Micro Matic
Kategori:	Ikke kategoriseret
Model:	DP-MET-H-40GR-Z

Har du brug for hjælp?

Hvis du har brug for hjælp til Micro Matic DP-MET-H-40GR-Z stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Micro Matic Manualer

Micro Matic MMPP4302-PKG-R Manual

25 August 2025

Micro Matic MMPP4302-R Manual

25 August 2025

Micro Matic BG-U-10KR Manual

12 Juni 2025

Micro Matic MBB78-E Manual

10 Juni 2025

Micro Matic METRO-H-8PSSKR Manual

1 September 2024

Micro Matic METRO-H-16PSSKR Manual

1 September 2024

Micro Matic METRO-H-16KR Manual

1 September 2024

Micro Matic MMPP4303-PKG Manual

29 August 2024

Micro Matic MMPP4307-PKG Manual

29 August 2024

Micro Matic MTB-6KR Manual

29 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IFM SU9030 Manual

13 September 2025

IFM O2U554 Manual

13 September 2025

Speco Technologies HTi70TM Manual

13 September 2025

QSC RMXa Manual

13 September 2025

Tineco Floor One S2 Series Manual

13 September 2025

Tineco Floor One S3 Breeze Manual

13 September 2025

Tineco Floor One S5 Steam Manual

13 September 2025

Osram VX500-CB Manual

13 September 2025

Zelmer ZTS7990 Manual

13 September 2025

Osram VX250-SP Manual

13 September 2025