Microchip ATSAMC20N18A Manual

Microchip Ikke kategoriseret ATSAMC20N18A

Læs gratis den danske manual til Microchip ATSAMC20N18A (117 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Microchip ATSAMC20N18A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/117

Atmel QTouch

SAM C20 Safety Library

USER GUIDE

Introduction

Atmel® QTouch® Peripheral Touch Controller (PTC) offers built-in hardware

for buttons, sliders, and wheels. PTC supports both mutual and self

capacitance measurement without the need for any external component. It

offers superb sensitivity and noise tolerance, as well as self-calibration and

minimizes the sensitivity tuning effort by the user.

The PTC is intended for acquiring capacitive touch sensor signals. The

external capacitive touch sensor is typically formed on a PCB, and the

sensor electrodes are connected to the analog charge integrator of the PTC

using the device I/Opins. The PTC supports mutual capacitance sensors

organized as capacitive touch matrices in different X-Y configurations,

including Indium Tin Oxide (ITO) sensor grids. In mutual capacitance mode,

the PTC requires one pin per X line(drive line) and one pin per Y line (sense

line). In self capacitance mode, the PTC requires only one pin with a Y-line

driver for each self-capacitance sensor.

The PTC supports two sets of libraries, the QTouch Library and the QTouch

Safety Library. The QTouch Library supports both mutual and self

capacitance methods. The QTouch Safety Library is available for both GCC

and IAR. The QTouch Safety Library also supports both the mutual

capacitance method and self capacitance method along with the additional

safety features.

Features

•Implements low-power, high-sensitivity, environmentally robust

capacitive touch buttons, sliders, and wheels

•Supports mutual capacitance and self capacitance sensing

•Upto 256 channels in mutual-capacitance mode

•Upto 32 channels in self-capacitance mode

•Two pin per electrode in mutual capacitance mode - with no external

components

•One pin per electrode in self capacitance mode - with no external

components

•Load compensating charge sensing

Atmel-42679C-SAM-C20-QTouch-Safety-Library_User Guide-07/2016

•Parasitic capacitance compensation for mutual capacitance mode

•Adjustable gain for superior sensitivity

•Zero drift over the temperature and VDD range

•No need for temperature or VDD compensation

•Hardware noise filtering and noise signal desynchronization for high conducted immunity

•Supports moisture tolerance

•Atmel provided QTouch Safety Library firmware

•Supports Sensor Enable and Disable at Runtime

•Supports Quick Reburst Feature for Faster Response Time

•Low Power Sensor Support

The following features are available only in the QTouch Safety Library:

•CRC protection

•Logical program flow sequence

•Memory protection using double inverse mechanism

•Library RAM relocation and

•Compile-time and Run-time check

For more information about the capacitance related technological concepts, Refer Chapter 4 in Atmel

QTouch LibraryPeripheral Touch Controller User Guide [42195] available at www.atmel.com.

Product Support

For assistance related to QTouch capacitive touch sensing software libraries and related issues, contact

your localAtmel sales representative or log on to myAtmel Design Support portal to submit a support

request or access acomprehensive knowledge base. If you don’t have a myAtmel account, please visit

http://www.atmel.com/design-support/ to create a new account byclicking on “Create Account” in the

myAtmel menu at the top of the page. Once logged in, you will be able to access the knowledge base,

submit new support cases from the myAtmel page orreview status of your ongoing cases.

Atmel SAM C20 Safety Library [USER GUIDE]

Atmel-42679C-SAM-C20-QTouch-Safety-Library_User Guide-07/2016

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	ATSAMC20N18A

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip ATSAMC20N18A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip AT7913 Manual

1 September 2025

Microchip ATmega1281 Manual

19 Juli 2025

Microchip ATtiny461 Manual

19 Juli 2025

Microchip ATxmega128D3 Manual

19 Juli 2025

Microchip ATxmega128D4 Manual

19 Juli 2025

Microchip ATTINY28 Manual

19 Juli 2025

Microchip ATTINY861 Manual

19 Juli 2025

Microchip ATmega1280 Manual

19 Juli 2025

Microchip ATtiny84A Manual

19 Juli 2025

Microchip ATmega645P Manual

19 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektrobock PT44 Manual

14 September 2025

BSS Audio FDS-366T Manual

14 September 2025

Systemair Airline R-114 Manual

14 September 2025

IFM SU2031 Manual

14 September 2025

Morel Tempo Ultra Integra 502 Manual

14 September 2025

IMC Networks 232CL9R Manual

14 September 2025

Varta Speed Charger 57955 Manual

14 September 2025

Melissa & Doug 9336 Manual

14 September 2025

Opus dataPREDATOR Manual

13 September 2025

Varta Wireless Power Bank 20000 57909 Manual

13 September 2025