Microchip ATSAMD20J15 Manual


Læs gratis den danske manual til Microchip ATSAMD20J15 (32 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Microchip ATSAMD20J15, eller vil du spørge andre brugere om produktet?

Side 1/32
SAM D20 Family
Low-Power, 32-bit Cortex-M0+ MCUs with 12-bit ADC, 10-
bit DAC, 256-Channel PTC, RTC, and SERCOM
Features
Operating Conditions
1.62V – 3.63V, -40°C to +85°C, DC up to 48 MHz
1.62V – 3.63V, -40°C to +105°C, DC up to 32 MHz
2.7V – 3.63V, -40°C to +125°C Extended Temperature with compliance to AEC-Q100, DC up to 32MHz
Core
• Arm® Cortex®-M0+ CPU running at up to 48 MHz
Single-cycle hardware multiplier
Memories
16/32/64/128/256 KB in-system self-programmable Flash
2/4/8/16/32 KB SRAM
System
Power-on Reset (POR) and Brown-out Detection (BOD)
Internal and external clock options with 48 MHz Digital Frequency Locked Loop (DFLL48M)
External Interrupt Controller (EIC)
Up to 16 external interrupts
One non-maskable interrupt
Two-pin Serial Wire Debug (SWD) programming, test and debugging interface
Low-Power
Idle and Stand-by Sleep modes
SleepWalking peripherals
Peripherals
8-channel Event System
Up to eight 16-bit Timer/Counters (TC), configurable as:
One 16-bit TC with two compare/capture channels
One 8-bit TC with two compare/capture channels
One 32-bit TC with two compare/capture channels, by using two TCs
32-bit Real Time Counter (RTC) with clock/calendar function
Watchdog Timer (WDT)
CRC-32 generator
Up to six Serial Communication Interfaces (SERCOM), each configurable to operate as either:
USART with full-duplex and single-wire half-duplex configuration
Inter-Integrated Circuit (I2C) up to 400 kHz
Serial Peripheral Interface (SPI)
One 12-bit, 350 ksps Analog-to-Digital Converter (ADC) with up to 20 channels
Differential and single-ended input
1/2x to 16x programmable gain stage
© 2022 Microchip Technology Inc.
and its subsidiaries
Complete Datasheet DS60001504F-page 1
Automatic offset and gain error compensation
Oversampling and decimation in hardware to support 13-bit, 14-bit, 15-bit, or 16-bit resolution
10-bit, 350 ksps Digital-to-Analog Converter (DAC)
Two Analog Comparators (AC) with Window Compare function
Peripheral Touch Controller (PTC)
Up to 256-channel capacitive touch and proximity sensing
I/O
Up to 52 programmable I/O pins
Packages
64-pin TQFP, VQFN
64-ball UFBGA (not available in grades Extended Temperature and AEC-QA100)
48-pin TQFP, VQFN
45-ball WLCSP (not available in grades Extended Temperature and AEC-QA100)
32-pin TQFP, VQFN
27-ball WLCSP (not available in grades Extended Temperature and AEC-QA100)
Power Consumption
Power Consumption
Down to 50 µA/MHz in Active mode
Down to 8 µA running the PTC
SAM D20 Family
© 2022 Microchip Technology Inc.
and its subsidiaries
Complete Datasheet DS60001504F-page 2


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: ATSAMD20J15

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip ATSAMD20J15 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer