Microchip ATSAME51J18A Manual

Microchip Ikke kategoriseret ATSAME51J18A

Læs gratis den danske manual til Microchip ATSAME51J18A (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Microchip ATSAME51J18A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

TB3183

What is SleepWalking? How it Helps to Reduce Power

Consumption

Introduction

The SleepWalking feature is available in ARM® Cortex®-based Microchip's microcontrollers (MCUs). This

feature allows temporary and asynchronous wake up of a peripheral to perform a task without waking up

the CPU from Standby mode.

In MCU operation, the internal timer wakes up the CPU to check if certain conditions have occurred (i.e.,

battery voltage monitoring using the ADC), or the peripheral interrupts have woke up the CPU. The CPU

and RAM traditionally consume the majority of the power in Active mode. Therefore, waking up the CPU

from Low-Power mode to check for these conditions and start relevant actions in an Active state will

consume a lot of power.

SleepWalking allows the CPU to remain in Low-Power mode until a relevant event occurs. When the CPU

is in Low-Power mode, that is, Standby mode in Cortex-M0+ MCU, the peripheral can request the clock to

perform its task. The CPU no longer needs to check whether or not a specific condition is present, such

as an address match condition on the I2C interface or a sensor connected to an ADC that has exceeded

a specific threshold. With SleepWalking, this is done entirely by the peripherals with the help of an event

system.

The following are basic implementation steps of SleepWalking:

• Main clocks and peripheral clocks are stopped in Sleep mode to save power

• Peripherals supporting SleepWalking (For example, peripherals supporting on-demand feature in

Cortex-M0+ MCUs) individually request clocks in Sleep mode

• Clocks remain active until a specific peripheral operation is complete

The CPU and RAM will not wake up when sleepwalking supported peripherals perform the tasks, unless

the CPU needs to perform an operation.

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	ATSAME51J18A

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip ATSAME51J18A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip M2GL060 Manual

2 December 2025

Microchip RTPF500TS Manual

2 December 2025

Microchip M1A3P600L Manual

1 December 2025

Microchip M2S090TS Manual

1 December 2025

Microchip M1A3P1000L Manual

1 December 2025

Microchip M2S090 Manual

30 November 2025

Microchip A3PE3000L Manual

30 November 2025

Microchip HC12-100S0s Manual

30 November 2025

Microchip M2GL010T Manual

29 November 2025

Microchip M2GL150T Manual

29 November 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vinotemp BR-RETRO-01-W Manual

17 December 2025

NightStick INTRANT XPP-5566RX Manual

17 December 2025

Vaxcel T0690 Manual

17 December 2025

Silverstone TS12 Manual

17 December 2025

TOTO Silas TS210P Manual

17 December 2025

Wine-Mate WM-8500DS Manual

17 December 2025

Arçelik A75L 8870 5B Manual

17 December 2025

Dals RWS48-CC Manual

17 December 2025

Vinotemp BR-30SSGG Manual

17 December 2025

Gamdias Aura GC1 Elite Manual

17 December 2025