Microchip ATTINY806 Manual

Microchip Ikke kategoriseret ATTINY806

Læs gratis den danske manual til Microchip ATTINY806 (14 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Microchip ATTINY806, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/14

ATtiny804/806/807/1604/1606/

1607

Silicon Errata and Data Sheet Clarification

The ATtiny804/806/807/1604/1606/1607 devices you have received conform functionally to the current device data

sheet (www.microchip.com/DS40002312), except for the anomalies described in this document. The errata described

in this document will likely be addressed in future revisions of the ATtiny804/806/807/1604/1606/1607 devices.

Notes:

• This document summarizes all the silicon errata issues from all revisions of silicon, previous as well as current

• Refer to the Device/Revision ID section in the current device data sheet (www.microchip.com/DS40002312) for

more detailed information on Device Identification and Revision IDs for your specific device, or contact your local

Microchip sales office for assistance

1. Silicon Issue Summary

Legend

-Erratum is not applicable.

XErratum is applicable.

Peripheral Short Description Valid for Silicon

Revision

Rev. A

Device 2.2.1 Writing the OSCLOCK Fuse in FUSE.OSCCFG to ‘1’ Prevents Automatic

Loading of Calibration Values X

ADC

2.3.1 One Extra Measurement Performed After Disabling ADC Free-Running

Mode X

2.3.2 Pending Event Stuck When Disabling the ADC X

2.3.3 ADC Performance Degrades with CLKADC Above 1.5 MHz and VDD <

2.7V X

2.3.4 ADC Functionality Cannot be Ensured with CLKADC Above 1.5 MHz and a

Setting of 25% Duty Cycle X

CCL

2.4.1 Connecting LUTs in Linked Mode Requires OUTEN Set to ‘1’ X

2.4.2 D-latch is Not Functional X

2.4.3 The CCL Must be Disabled to Change the Configuration of a Single LUT X

RTC 2.5.1 Disabling the RTC Stops the PIT X

2.5.2 Any Write to the RTC.CTRLA Register Resets the RTC and PIT Prescaler X

TCA X2.6.1 Restart Will Reset Counter Direction in NORMAL and FRQ Mode

TCB

2.7.1 The TCA Restart Command Does Not Force a Restart of TCB X

2.7.2 Minimum Event Duration Must Exceed the Selected Clock Period X

2.7.3 CCMP and CNT Registers Operate as 16-Bit Registers in 8-Bit PWM Mode X

USART

2.8.1 TXD Pin Override Not Released When Disabling the Transmitter X

2.8.2 Open-Drain Mode Does Not Work When TXD is Configured as Output X

2.8.3 Start-of-Frame Detection Can Unintentionally Be Triggered in Active Mode X

ATtiny804/806/807/1604/1606/1607

Silicon Issue Summary

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	ATTINY806

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip ATTINY806 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip HS12-100D0/12DS2F Manual

18 Februar 2025

Microchip HSA0-040SDA/A0SA10 Manual

18 Februar 2025

Microchip HSA0-040SIA/A0S1F Manual

18 Februar 2025

Microchip HT12-100S0s/12ST25 Manual

17 Februar 2025

Microchip EMC2103-2 Manual

17 Februar 2025

Microchip EMC1047 Manual

17 Februar 2025

Microchip HCS201 Manual

17 Februar 2025

Microchip LE9653 Manual

17 Februar 2025

Microchip LAN7430 Manual

17 Februar 2025

Microchip HCS500 Manual

17 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony RM-V202T Manual

15 Juni 2025

Hughes & Kettner Attax Metroverb Manual

15 Juni 2025

Kohler K-10124 Manual

15 Juni 2025

Planet Audio P9900CPA Manual

15 Juni 2025

Levenhuk LabZZ SP20 Manual

15 Juni 2025

Planet Audio P62CP Manual

15 Juni 2025

Cranborne Audio Carnaby 500 Manual

15 Juni 2025

Audio-Technica AT-VM740xML/H Manual

15 Juni 2025

Stamos SWG-WC-3D Manual

15 Juni 2025

Planet Audio P350MB Manual

15 Juni 2025