Microchip EVB-USB2230-IrDA Manual

Microchip Ikke kategoriseret EVB-USB2230-IrDA

Læs gratis den danske manual til Microchip EVB-USB2230-IrDA (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Microchip EVB-USB2230-IrDA, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Austin Design Center
11000 North Mopac Expressway
Stonelake Bldg. 6 Suite 500
Austin, Texas 78759
EVB-USB2230-IrDA Users Guide
Rev. D
Updated 2006-12-14
The information contained herein is proprietary to SMSC and shall be used solely in accordance with the agreement
pursuant to which it is provided. Although the information is believed to be accurate, no responsibility is assumed for
inaccuracies. SMSC reserves the right to make changes to this document and to specifications and product
descriptions at any time without notice. Neither the provision of this information nor the sale of the described
semiconductor devices conveys any licenses under any patent rights or other intellectual property rights of SMSC or
others unless specifically specified otherwise. The product may contain design defects or errors known as anomalies,
including but not necessarily limited to any which may be identified in this document, which may cause the product to
deviate from published specifications. SMSC products are not designed, intended, authorized or warranted for use in
any life support or other application where product failure could cause or contribute to personal injury or severe
property damage. Any and all such uses without prior written approval of an officer of SMSC will be fully at the risk of
the customer. SMSC is a registered trademark of Standard Microsystems Corporation (“SMSC”).
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST
INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR
USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL,
PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REV-ENUES OF ANY KIND;
REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR
OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS
HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Evaluation Board: Two-layer EVB-USB2230-IrDA - Rev. D Users Guide
Customer Evaluation Board with IrDA Transceiver for USB2230
Features
• Operates from either USB Bus or from a single voltage (+5.0V, regulated) ‘wall wart’ external power supply
• Low Cost 2-Layer Space-saving Design
• Supports these Media Types: Compact Flash, Micro Drive, MultiMediaCard, xD picture Card, Smart Media,
Secure Digital, Memory Stick, High Speed Memory Stick, Memory Stick Pro
• Access to up to Four Memory Devices at the same time
• Software Upgradeable through On-Board Flash Socket
• Serial EEPROM capable
• Single Onboard +3.3V Regulator
• Internal FET Power Switching for All Media Types (except CF)
• Single Crystal Clock Source
• IrDA Interface for a +5V dongle that supports SIR and FIR up to 4Mbits/s
General Description
The EVB-USB2230-IRDA is a platform featuring the USB2230 card reader. The board connects to a USB 2.0 port
(J1), and optionally to a 5.0V external supply (J2: 2.1mm, tip -- POS). The board provides four media sockets
supporting at least fifteen different media types. It also features an interface for an IrDA or a CIR dongle for infra-
red communications. This board demonstrates a small footprint, low-cost implementation of the USB2230 with a
robust feature set.
The board features an on-board EEPROM for configuration and serial number data, as well as a socket for a Flash
device for firmware updates. The schematics for this board indicate which components are required for each
programming and configuration option.
Power Consumption
These values represent a board with no media installed.
435uA Suspended
55mA Enumerated (Active and Idle)
Jumper Descriptions
ROMEN: J30 Jumper pins 1 & 2 to enable the Flash installed at U30.
Power Select: J3 Jumper pins 1 & 2 to select Bus Powered mode (USB-supplied power).
Jumper pins 2 & 3 to select Self Powered mode (externally-supplied 5.0V).
SMSC 2 12/14/2006

Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: EVB-USB2230-IrDA

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip EVB-USB2230-IrDA stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Microchip Manualer

Microchip

Microchip ATmega1281 Manual

19 Juli 2025
Microchip

Microchip ATtiny461 Manual

19 Juli 2025
Microchip

Microchip ATxmega128D3 Manual

19 Juli 2025
Microchip

Microchip ATxmega128D4 Manual

19 Juli 2025
Microchip

Microchip ATTINY28 Manual

19 Juli 2025
Microchip

Microchip ATTINY861 Manual

19 Juli 2025
Microchip

Microchip ATmega1280 Manual

19 Juli 2025
Microchip

Microchip ATtiny84A Manual

19 Juli 2025
Microchip

Microchip ATmega645P Manual

19 Juli 2025
Microchip

Microchip ATmega16A Manual

19 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MiVue Smartbox 3 Manual

1 August 2025
Navman

Navman MiVue 850 Manual

1 August 2025
Navman

Navman MiVue 690 Manual

1 August 2025
Navman

Navman MiVue 145 GPS TAG Manual

1 August 2025
Navman

Navman MY30 Manual

1 August 2025
Tripp Lite

Tripp Lite SPS610HGRA Manual

1 August 2025
AEG

AEG E1WYHSK1 Manual

1 August 2025
Thermaltake

Thermaltake Pacific R1 Plus Manual

1 August 2025
Olivetti

Olivetti d-Copia 4523MFplus Manual

1 August 2025
Gossen

Gossen GL SpectroSoft Manual

1 August 2025