Microchip MCP19115 Manual


Læs gratis den danske manual til Microchip MCP19115 (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Microchip MCP19115, eller vil du spørge andre brugere om produktet?

Side 1/24
2014 Microchip Technology Inc. DS20005270A-page 1
MCP19114/5
This document includes the programming
specifications for the following devices:
• MCP19114
• MCP19115
1.0 PROGRAMMING THE
MCP19114 AND MCP19115
DEVICES
The MCP19114/5 devices are programmed using a serial
method. The Serial mode will allow these devices to be
programmed while in the user’s system. These
programming specifications apply to all of the above
devices in all packages.
1.1 Hardware Requirements
This family of devices requires one power supply for
VIN, see Table 6-1. The VDD that is used to bias all
internal circuitry is internally generated and regulated
to 5V. Analog circuitry is powered from internally
generated AVDD and is regulated to 4V.
1.2 Program/Verify Mode
The Program/Verify mode for this family of devices
allows programming the user program memory, the
user ID locations, the Calibration Word and the
Configuration Word.
FIGURE 1-1: PIN DIAGRAM – 24-PIN QFN (MCP19114)
1
2
3
4
5
6 13
7
8
9
10
11
12
14
15
16
17
18
23
22
21
20
19
24
EXP-25
GPA0/AN0/TEST_OUT
GPA1/AN1/CLKPIN
GPA2/AN2/T0CKI/INT
GPA3/AN3
GPA7/SCL/ICSPCLK
GPA6/CCD/ICSPDAT
GPA5/MCLR/TEST_EN
GPB0/SDA
DESATN
DESATP/ISOUT
ISP
ISN
IP
AGND
PGND
SDRV
PDRV
VDR
GPB1/AN4/VREF2
ICOMP
IFB
VS
VIN
VDD
MCP19114
MCP19114/5 Flash Memory Programming Specification


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: MCP19115

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip MCP19115 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Microchip Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer