Microchip MGC3130 Manual

Microchip Ikke kategoriseret MGC3130

Læs gratis den danske manual til Microchip MGC3130 (59 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Microchip MGC3130, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/59
Aurea GUI User's Guide
Aurea Graphical User Interface User's Guide
Preface
Introduction
This document provides a guide to the use of the Aurea tool with Microchip Gesture ICs.
Recommended Reading
For the latest information on using the device, read the “ ” file (an HTML file) in the AureaReadme.html
installation directory. The release notes (Readme) contains update information and known issues that
may not be included in this user’s guide.
This user’s guide describes how to use the Aurea Graphical User Interface. Other useful documents are
listed below. The following Microchip documents are available and recommended as supplemental
reference resources.
• “ ” (DS40002037) – Consult this document for informationMGC3140 3D Gesture Controller Data Sheet
regarding the MGC3140 3D Gesture Controller.
• “GestIC® Design Guide” (DS40001716) – This document describes the GestIC system characteristic
parameters and the design process. It enables the user to generate a good electrode design and to
parameterize the full GestIC system.
• “MGC3140 GestIC® Library Interface Description User’s Guide” (DS40001875) – This document is the
interface description of the MGC3140’s GestIC Library. It outlines the function of the Library’s message
interface and contains the complete message reference to control and operate the MGC3140 system.
Description
The Aurea evaluation software demonstrates Microchip’s GestIC® technology and its features and
applications. Aurea provides visualization of MGC3XX0 generated data and access to GestIC Library
controls and configuration parameters. It provides the following:
• Visualization of hand position and user gestures
• Visualization of sensor data
• Run-Time Control of sensor features
• MGC3XX0 GestIC Library update
• Analog Front-End parameterization
• Colibri Signal Processing parameterization
• Logging of sensor values and storage in a log file
Software License Information
Copyright (C) 2013 Microchip Technology Inc. and its subsidiaries (“Microchip”). All rights reserved.
© 2018 Microchip Technology Inc. User Guide DS40001681E-page 1

Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: MGC3130

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip MGC3130 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Microchip Manualer

Microchip

Microchip M2GL060 Manual

2 December 2025
Microchip

Microchip RTPF500TS Manual

2 December 2025
Microchip

Microchip M1A3P600L Manual

1 December 2025
Microchip

Microchip M2S090TS Manual

1 December 2025
Microchip

Microchip M1A3P1000L Manual

1 December 2025
Microchip

Microchip M2S090 Manual

30 November 2025
Microchip

Microchip A3PE3000L Manual

30 November 2025
Microchip

Microchip HC12-100S0s Manual

30 November 2025
Microchip

Microchip M2GL010T Manual

29 November 2025
Microchip

Microchip M2GL150T Manual

29 November 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vinotemp

Vinotemp BR-RETRO-01-W Manual

17 December 2025
NightStick

NightStick INTRANT XPP-5566RX Manual

17 December 2025
Vaxcel

Vaxcel T0690 Manual

17 December 2025
Silverstone

Silverstone TS12 Manual

17 December 2025
TOTO

TOTO Silas TS210P Manual

17 December 2025
Wine-Mate

Wine-Mate WM-8500DS Manual

17 December 2025
Arçelik

Arçelik A75L 8870 5B Manual

17 December 2025
Dals

Dals RWS48-CC Manual

17 December 2025
Vinotemp

Vinotemp BR-30SSGG Manual

17 December 2025
Gamdias

Gamdias Aura GC1 Elite Manual

17 December 2025