Microchip MIC4104 Manual

Microchip Ikke kategoriseret MIC4104

Læs gratis den danske manual til Microchip MIC4104 (19 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Microchip MIC4104, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/19

MIC4103/4104

100V Half-Bridge MOSFET Drivers with

3A/2A Sinking/Sourcing Current

General Description

T - -he MIC4103 and MIC4104 are high frequency, 100V half

bridge MOSFET drivers with faster turn off characteristics -

than the MIC4100 and MIC4101 drivers. They feature fast

24ns propagation delay times and 6ns driver fall times.

The low side and high side gate drivers are independently - -

controlled and matched to within 3ns (typical). The

MIC4103 has CMOS input thresholds and the MIC4104

has TTL input thresholds. The MIC4103/4 include a high-

voltage internal diode that charges the high side gate drive -

bootstrap capacitor.

A robust, high speed, and low power level shifter provides - -

clean level transitions to the high side output. The robust -

operation of the MIC4103/4 ensures the outputs are not

affected by supply glitches, HS ringing below ground, or

HS slewing with high-speed voltage transitions.

Undervoltage protection is provided on both the low-side

and high-side drivers.

The MIC4103 and MIC4104 are available in an 8- pin SOIC

package with an operating junction temperature range of

– ° ° 40 C to +125 C.

Datasheets and support documentation are available on

Micrel’s web site at: www.micrel.com.

Features

• Asymmetrical, low impedance outputs drive 1000pF

load with 10ns rise times and 6ns fall times

• Bootstrap supply maximum voltage to 118V DC

• Supply voltage up to 16V

• - -Drives high and low side N Channel MOSFETs with

independent inputs

• CMOS input thresholds (MIC4103)

• TTL input thresholds (MIC4104)

• - On chip bootstrap diode

• Fast 24ns propagation times

• Low power consumption

• Supply undervoltage protection

• Ω Ω Typical 2.5 -pull up and 1.25 -pull down output driver

resistance

• – ° ° 40 C to +125 C junction temperature range

Applications

• - High voltage buck converters

• - - Full and half bridge power topologies

• Active clamp forward converter

• Two switch forward topologies

• Interface to digital controllers

Typical Application

100V Buck Regulator Solution

Micrel Inc. • 2180 Fortune Drive • Jose, CA 95131 • USA • tel +1 (408) 944 0800 • fax + 1 (408) 474 1000 • San - - http://www.micrel.com

November 12, 2014 Revision 3.0

Produkt Specifikationer

Mærke:	Microchip
Kategori:	Ikke kategoriseret
Model:	MIC4104

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip MIC4104 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Microchip Manualer

Microchip M2GL060 Manual

2 December 2025

Microchip RTPF500TS Manual

2 December 2025

Microchip M1A3P600L Manual

1 December 2025

Microchip M2S090TS Manual

1 December 2025

Microchip M1A3P1000L Manual

1 December 2025

Microchip M2S090 Manual

30 November 2025

Microchip A3PE3000L Manual

30 November 2025

Microchip HC12-100S0s Manual

30 November 2025

Microchip M2GL010T Manual

29 November 2025

Microchip M2GL150T Manual

29 November 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vinotemp BR-RETRO-01-W Manual

17 December 2025

NightStick INTRANT XPP-5566RX Manual

17 December 2025

Vaxcel T0690 Manual

17 December 2025

Silverstone TS12 Manual

17 December 2025

TOTO Silas TS210P Manual

17 December 2025

Wine-Mate WM-8500DS Manual

17 December 2025

Arçelik A75L 8870 5B Manual

17 December 2025

Dals RWS48-CC Manual

17 December 2025

Vinotemp BR-30SSGG Manual

17 December 2025

Gamdias Aura GC1 Elite Manual

17 December 2025