Microchip MIC4811 Manual


Læs gratis den danske manual til Microchip MIC4811 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Microchip MIC4811, eller vil du spørge andre brugere om produktet?

Side 1/12
MIC4811
High Current 6 Channel Linear WLED
Driver with DAM™ and Ultra Fast
PWM™ Control
Ultra Fast PWM, DAM and Dynamic Average Matching are trademark of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 http://www.micrel.com
General Description
The MIC4811 is a high efficiency linear White LED
(WLED) driver designed to drive up to six high current
WLEDs for signage lighting. The MIC4811 provides the
highest possible efficiency as this architecture has no
switching losses present in traditional charge pumps or
inductive boost circuits. The MIC4811 provides six linear
drivers which maintain constant current for up to six
WLEDs. It features a typical dropout of 100mV at 50mA.
The MIC4811 features Dynamic Average Matching
(DAM™) which is specifically designed to provide optimum
matching across all WLEDs. The high accuracy (±1%
typical) current regulated WLED channels ensure uniform
display illumination under all conditions. The brightness is
controlled through an Ultra Fast PWM™ interface
operating down to less than 1% duty cycle.
The MIC4811 is available in an 10-pin MSOP package
with a junction temperature range of -40° °C to +125 C.
Datasheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Features
High Efficiency (no Voltage Boost losses)
Ultra Fast PWM™ control (200Hz to 500kHz)
Input voltage range: 3.0V to 5.5V
LED current range up to 50mA per channel
Programmable LED current with external resistor
Dropout of 100mV at 50mA
Matching better than ±1% (typical)
Current Accuracy better than ±1% (typical)
Maintains proper regulation regardless of how many
channels are utilized
10-pin MSOP package
Applications
Billboard displays
Marquee displays
Instrument displays
LCD display modules
____________________________________________________________________________________________________________
Typical Application
High Current Lighting (Six WLEDs)
April 2011 M9999-041411-B
Micrel Inc. MIC4811
April 2011 2 M9999-041411-B
Ordering Information
Part Number Mark Code(1) Junction Temperature Range Package
MIC4811YMM 4811 –40°C to +125°C 10-Pin MSOP
Pin Configuration
10-Pin MSOP (MM)
(Top View)
Pin Description
Pin Number Pin Name Pin Function
1 VIN Voltage Input. Connect at least 2.2µF ceramic capacitor between VIN and GND.
2 EN Enable LED drivers. This pin can be used as a PWM input for dimming of WLEDs. Do not leave
floating.
3 RSET An internal 1.27V reference sets the nominal maximum WLED current. Example, apply a 16.5k
resistor between RSET and GND to set LED current to 50mA at 100% duty cycle.
4 GND Ground.
5 D6 LED6 driver input. Connect LED anode to VIN and cathode to this pin.
6 D5 LED5 driver input. Connect LED anode to VIN and cathode to this pin.
7 D4 LED4 driver input. Connect LED anode to VIN and cathode to this pin.
8 D3 LED3 driver input. Connect LED anode to VIN and cathode to this pin.
9 D2 LED2 driver input. Connect LED anode to VIN and cathode to this pin.
10 D1 LED1 driver input. Connect LED anode to VIN and cathode to this pin.


Produkt Specifikationer

Mærke: Microchip
Kategori: Ikke kategoriseret
Model: MIC4811

Har du brug for hjælp?

Hvis du har brug for hjælp til Microchip MIC4811 stil et spørgsmål nedenfor, og andre brugere vil svare dig